Dals 24-Foot Outdoor RGBW WiFi Tape Kit
Quick Start Guide
Product Overview
This guide provides instructions for setting up and using the Dals 24-foot outdoor RGBW WiFi tape kit, model IU-RGBWWIFI24DW (also identified by model Y4305A).
Installation and Setup
Step 1: Install your Dals light
Remove the light strip from its packaging and plug it into the wall. Then, turn it on.
[Diagram: A hand removing the light strip from its packaging and plugging it into a wall socket.]
Step 2: Download or update the app
Visit the App Store or Google Play to download the latest version of the free Dals RGBW app.
[Get it on Google Play] [Download on the App Store]
[Diagram: Icons representing the Google Play Store and Apple App Store.]
Step 3: Connect your light
Using the Dals RGBW app, connect your light by adding a new device to your account.
For a complete step-by-step guide, please see the WiFi Connection Guide at www.dalslighting.com/downloads.
[Diagram: A smartphone displaying an app interface, a WiFi symbol, and a light strip, indicating connection.]
Step 4: Have fun!
Use the Dals app, Amazon Alexa, or Google Assistant to control your lighting and create your desired ambiance.
[Diagram: Icons for the Dals app, Google Assistant, and Amazon Alexa.]
Need Assistance?
Our support team is here to help. Send an email to info@dalslighting.com or call us toll-free at 1-877-430-1818.
Product Specifications and Compliance
Warranty
Dals offers a 1-year warranty from the date of purchase that covers repair or replacement of defective parts of the housing, optics, and electronics. To contact Dals customer service, please call 1-877-430-1818 or send an e-mail to info@dalslighting.com.
Model
Y4305A
Power
100V~240Vac, 50/60Hz 0.5A (Max), 11 Watts
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
IC Compliance
This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
(French translation: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.)
Notice
Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
