Multifunctional Solar Radio XSY330

Table of Contents

• 1. Radio Operation
• 2. Flashlight
• 3. Reading Lamp
• 4. Charging and Discharging Functions
• 5. SOS Alarm
• 6. Antenna
• 7. 3 Language Methods
• 8. Power Indicator
• 9. Specifications
• 10. Warranty
• 11. Package Contents
• 12. Friendly Reminders
• 13. Documents / Resources
• 13.1 Related Manuals/Resources

1. Radio Operation

Turn the "Volume" knob clockwise to turn on the radio and adjust the volume.

Select FM/AM/WB bands using the radio band switch.

Extend the antenna for better signal reception, especially when listening to FM and NOAA broadcasts.

Turn the tuner knob to select a station. The green tuning indicator will light up when the selected station is fully tuned.

Turn the volume knob to the OFF position to turn off the radio.

Diagram Description: The diagram shows the front of the radio with controls labeled: Volume Dial, Band Switch, Tuner Dial. The top of the radio shows the Solar Panel and a Compass.

2. Flashlight

Press the flashlight button once to turn on the far beam. Pressing it a second time turns on the dipped beam. Pressing it a third time turns on both beams. Pressing it a fourth time turns off all lights.

Diagram Description: The diagram shows the side of the radio with the Hand Crank. The top of the radio is labeled "Far and Dipped Beam".

3. Reading Lamp

Open the solar panel, press the reading light button, and the reading lamp will turn on. Close the solar panel, press the button again, and the reading light will turn off.

4. Charging and Discharging Functions

The waterproof cover on the side of the device has a USB output port and a USB input port.

Connect a USB device to the USB output port using a USB cable to power the USB device. When the device is used as a power bank, the power indicator lights dim.

Note:

1. If you want to charge your phone, you can choose the appropriate cable.
2. If you cannot charge your phone after connecting it, unplug the USB cable and reconnect the data cable to activate the output power.
3. This function is recommended for emergency use. Do not use it as a regular power bank.

Diagram Description: The diagram shows the back of the radio with buttons labeled: Flashlight Button, Reading Light Button, SOS Button. It also shows ports labeled: USB Input, USB Output.

5. SOS Alarm

Press and hold the SOS button for 3 seconds. The device will activate a loud siren and a flashing beam. Press the SOS button again to turn it off.

6. Antenna

There is a retractable antenna on the right side of the radio. When listening to FM/AM/WB channels, it is recommended to extend the antenna for better signal.

Diagram Description: The diagram shows the front of the radio with the antenna extended.

7. 3 Language Methods

This section is mentioned in the table of contents but no content is provided in the document.

8. Power Indicator

This device has 4 power indicators (25%, 50%, 75%, 100%) that show the power level. The lights turn on during charging and discharging.

Diagram Description: The diagram shows the radio's display panel with tuning indicators and battery level indicators.

9. Specifications

Note: Due to differences in usage environments, the actual usage time of the radio may vary slightly from the data in the test report.

10. Warranty

The device has a full 12-month warranty against manufacturing defects from the date of purchase.

11. Package Contents

• Radio x 1
• User Manual x 1
• USB Cable x 1

12. Friendly Reminders

• For first-time use or if the device has been idle for more than 60 days, turn the hand crank for 1 minute to activate the internal battery.
• The device must not be exposed to dripping or splashing water, and objects filled with liquids should not be placed on the device.
• Do not over-discharge the device, as this may shorten the lifespan of the internal battery or even damage it.
• Avoid shining the flashlight directly into your eyes, as it can cause discomfort.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void your right to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.

13. Documents / Resources

13.1 Related Manuals/Resources

The document references related manuals and resources, but specific links or content are not provided within this excerpt.