Instruction Manual for Philips models including: WT120C G2 CoreLine Waterproof Tube, WT120C G2, CoreLine Waterproof Tube, Waterproof Tube, Tube
WT120C G2 LED40S/840 PSU L600 | 911401815587 | Philips lighting
WT120C G2 LED120S/840 PSD L1500 | 911401816487 | Philips lighting
WT120C G2 LED40S/840 PSU L600 | 911401815587 | Philips lighting CH
- Do not install the luminaire on the loca on where it is exposed to (animal) grease, oil, esp. cooking or mineral oil and dis llates (petroleum), heavy naphthenic treated with hydrogen, or swimming pool applica ons (with chlorine present), or carwash (due to chemicals and/or salt presence). LED20S LED40S LED40S LED60S LED60S LED80S LED80S LED100S LED100S LED120S LED120S PSU PSU PSD PSU PSD PSU PSD PSU PSD PSU PSD 14.5 15.8 23.1 18.6 23.1 17.2 25.1 17.2 25.1 19 25 182 175 221 153 221 172 214 172 214 280 230 72 50 22 36 22 31 21 31 21 45 32 14 23 14 20 13 20 13 122 85 37 61 37 53 36 53 36 75 52 23 37 23 32 22 32 22 56 28 28 20 20 15 15 12 12 86 43 43 30 30 22 22 18 18 144 72 72 50 50 37 37 30 30 24 20 15 13 41 34 25 21 10 10 15 15 25 25 Additional Through wiring options: 12NC 911401816587 911401816787 Description WT120Z TW-3x2.5-L600 WT120Z TW-3x2.5-L1200 EOC 872016975515499 872016975517899 911401816987 WT120Z TW-3x2.5-L1500 872016975519299 911401816687 WT120Z TW-5x2.5-L600 872016975516199 911401816887 WT120Z TW-5x2.5-L1200 872016975518599 911401817087 WT120Z TW-5x2.5-L1500 872016975520899 7 4 WT120C G2 LED20S/840 PSU L600 2000 4000 12.8 D WT120C G2 LED40S/840 PSU L600 4000 4000 25 C WT120C G2 LED60S/840 PSU L1200 6000 4000 37.5 C WT120C G2 LED80S/840 PSU L1200 8000 4000 50 C WT120C G2 LED100S/840 PSU L1500 10000 4000 62 C WT120C G2 LED120S/840 PSU L1500 12000 4000 75 C WT120C G2 LED40S/840 PSD L600 4000 4000 25 C WT120C G2 LED60S/840 PSD L1200 6000 4000 37.5 C WT120C G2 LED80S/840 PSD L1200 8000 4000 50 C WT120C G2 LED100S/840 PSD L1500 10000 4000 62 C WT120C G2 LED120S/840 PSD L1500 12000 4000 75 C 0.8 0.8 1.3 1.3 1.73 1.73 0.83 1.33 1.33 1.73 1.73 Type A B 665 Dimension (mm) Nr.of C D E min E max F clips 308 512 6 10 76 1215 80 38 538 1062 85 1515 838 1362 12 E -+ 100mm OPTIONAL ANTI-VANDAL MOUNTING x2 1Nm wire suspension 1 444170173404 a) b) c) Vertical installation d) d1) e) e1) f) x2 x2 x2 Do not tighten the nut - E + 100mm E + 100mm 1Nm x2 mandatory!!! tighten the nut (antivandal) f1) 1a 1Nm x2 mandatory!!! tighten the nut (antivandal) Repeat a) b) c) process d) 1b Switch off the power supply before installation 50 35 9 Ø 1.0-2.5mm² 2 PSU Ø 8-12mm Horizontal installation e) DA+ DA- Switch off the power supply before installation PSD ! 50 35 9 27 2Nm Ø 1.0-2.5mm² Ø 8-12mm 2a.1 Internal through wiring (PSU) a) L:Brown N:Blue :Yellow/Green b) c) 1.Insert the terminal block with through wires 2.Fix the terminal block with screws 3.Finish Through Wiring /TW/ (optional) Ø 20mm Internal through wiring (PSD) DA+ DA- a) L:Brown N:Blue :Yellow/Green DA+:Black DA-:Grey b) c) 2a.2 DA+ DA- DA+ DA- DA+ DA- DA+ DA- 1.Insert the terminal block with through wires 2.Fix the terminal block with screws DA+ DA- 3.Finish DA+ DA- 1.5Nm ! 27 2Nm 2b Mid- or side - entry (optional) Knock out for cable entry a) b) d) e) 2b.1 (*) NYM cable is suitable for TW Switch off the power supply before installation c) f) 45 30 8 PSU Ø 1.0-2.5mm² Ø 8-12mm 50 35 9 PSD Ø 1.0-2.5mm² Ø 8-12mm ! 24 27 2Nm 2/4 Knock out for cable entry a) b) ! Switch off the power supply before installation 24 27 45 2Nm 30 8 c) 2b.2 d) Repeat 2b.1 d, e, f process Ø 1.0-2.5mm² Ø 8-12mm Replacement of Silicone Plug(optional) ! Replacement of waterproof plug(optional) 1.6Nm 27 a) b) New Silicone Plug 2Nm a) b) c) Ø 12-14mm d) c) Minimal screwdriver size min. 6mm 2c 2d Only for 120S PSD L1500 model. Use only optical sub-assembly please don't press it with your hands or anything. 3 that delivered with housing in one box! 4a 4b 5 2 2 1 6 3/4CorelDRAW 2019 Corel PDF Engine Version 21.0.0.593