AcuRite Weather Forecaster

Unpacking Instructions

Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove.

Package Contents

1. Display unit
2. Outdoor sensor
3. Instruction Manual

Product Registration

Register online to receive 1 year warranty protection at www.AcuRite.com. Product registration is required to receive warranty service.

Features & Benefits: Outdoor Sensor

• 1. Integrated Hanger: For easy placement.
• 2. Wireless Signal Indicator: Flashes when data is being sent to the display unit.
• 3. Battery Compartment: Houses the batteries.
• 4. A-B-C Switch: An ID code that must match the display unit's A-B-C switch to ensure units synchronize.
• 5. Battery Compartment Cover: Protects the battery compartment.

Features & Benefits: Display Unit

AcuRite Weather Forecaster display unit features:

• 1. Learning Mode Icon: Disappears after weather forecast self-calibration is complete.
• 2. 12 to 24 Hour Weather Forecast: Self-Calibrating Forecasting pulls data from the outdoor sensor to generate your personal forecast.
• 3. Current Barometric Pressure: Displays the current barometric pressure.
• 4. Day of the Week: Shows the current day of the week.
• 5. Display Unit Low Battery Indicator: Alerts when the display unit batteries are low.
• 6. Selected Time Zone: Allows selection of the desired time zone.
• 7. Intelli-Time® Clock: Pre-programmed to the correct date and time, automatically updating for Daylight Saving Time.
• 8. Current Indoor Temperature: Displays the current indoor temperature with a trend arrow indicating direction.
• 9. Date: Shows the current date.

Back of Display Unit:

• 17-19. ▲, ▼ & SET Buttons: Used for setup preferences.
• 20. RESET Button: Performs a full reset to factory defaults.
• 21. A-B-C Switch: An ID code that must match the sensor's A-B-C switch to ensure units synchronize.
• 22. Battery Compartment: Houses the display unit batteries.
• 23. Battery Compartment Cover: (Not shown) Covers the battery compartment.

Setup

Sensor Setup

1. Set the A-B-C Switch: The A-B-C switch is located inside the battery compartment. Set it to A, B, or C. Ensure this matches the setting on the display unit for synchronization.
2. Install or Replace Batteries: AcuRite recommends high-quality alkaline or lithium batteries. Lithium batteries are required for the sensor in low temperatures (below -4°F / -20°C) as cold can affect alkaline battery performance. Heavy-duty or rechargeable batteries are not recommended.

   Steps:

   • Slide off the battery compartment cover. Note the A-B-C switch setting.
   • Insert 2 x AA batteries into the compartment, observing polarity (+/-).
   • Replace the battery cover.

   Temperature Performance: Lithium batteries: -40°F to 158°F (-40°C to 70°C). Alkaline batteries: -4°F to 158°F (-20°C to 70°C).

Display Unit Setup

1. Set the A-B-C Switch: Locate the A-B-C switch inside the battery compartment and set it to A, B, or C. This must match the sensor's switch for synchronization.
2. Install or Replace Batteries: Use 3 x AA alkaline batteries. Ensure correct polarity (+/-) when inserting.
   • Remove the battery compartment cover.
   • Insert 3 x AA alkaline batteries.
   • Replace the battery cover.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean contacts before installation. Remove batteries from equipment not in use for extended periods. Follow polarity diagrams. Promptly remove dead batteries. Dispose of used batteries properly. Use only recommended battery types. Do not incinerate, dispose of in fire, mix old/new or different battery types, use rechargeable batteries, recharge non-rechargeable batteries, or short-circuit terminals.

Intelli-Time® Clock

The Intelli-Time clock and calendar are pre-programmed and update automatically for Daylight Saving Time if the setting is ON. Select your time zone using SET mode.

Set the Time & Date

Press the "SET" button on the back of the display unit to enter SET MODE. The item being set will blink. Use the "▲" or "▼" buttons to adjust (hold for fast adjust). Press "SET" again to save and move to the next preference.

The preference set order is:

• TIME ZONE (PST, MST, CST, EST, AST, HAST, AKST)
• DST (Daylight Saving Time ON or OFF)
• CLOCK HOUR
• CLOCK MINUTE
• CALENDAR MONTH
• CALENDAR DATE
• CALENDAR YEAR

SET MODE exits automatically after 30 seconds of inactivity. If you are in an area that observes Daylight Savings Time, set DST to ON.

Select Degrees Fahrenheit or Celsius

In normal display mode, press and release the "▼" button.

Select Barometric Pressure Units in Hg or hPa

In normal display mode, press and release the "▲" button.

Placement for Maximum Accuracy

Proper placement of the display unit and outdoor sensor is critical for accuracy and performance, as AcuRite sensors are sensitive to environmental conditions.

Display Unit Placement

Place the display unit in a dry area free of dirt and dust. It can stand upright for tabletop use or be wall-mounted.

Outdoor Sensor Placement

Place the sensor outside to observe outdoor conditions. It is water-resistant for general outdoor use, but placing it in an area protected from direct weather elements will extend its life. Hang the sensor using the integrated hanger or string from a suitable location, such as a well-covered tree branch. The optimal location is 4 to 8 feet above the ground in permanent shade with good air circulation.

Important Placement Guidelines

• To ensure accurate temperature measurement, place units out of direct sunlight and away from heat sources or vents.
• The display unit and outdoor sensor must be within 330 ft (100 m) of each other.
• To maximize wireless range, place units away from large metallic items, thick walls, metal surfaces, or other objects that may limit wireless communication.
• To prevent wireless interference, place both units at least 3 ft (0.9 m) away from electronic devices (TV, computer, microwave, radio, etc.).

Diagram illustrating placement: A television (TV) is shown 3 feet (0.91 m) away from the display unit. The outdoor sensor is shown mounted on a tree branch, with a maximum wireless range of 330 feet (100 meters) indicated.

Setup is Complete

The sensor will now synchronize with the display unit. This may take a few minutes. Refer to the troubleshooting section if issues arise.

Operation

Using the Weather Forecaster

Learning Mode

Self-Calibrating Forecasting uses an algorithm to analyze pressure changes over time to determine altitude. After 14 days, the Learning Mode icon disappears, indicating the unit is self-calibrated and ready for superior weather prediction.

Weather Forecast

AcuRite's Self-Calibrating Forecasting provides a personal forecast for the next 12 to 24 hours by collecting data from the outdoor sensor, offering pinpoint accuracy for your location.

Forecast Icons:

• RAIN/SNOW MIX LIKELY
• SNOW LIKELY
• LIGHT RAIN LIKELY
• CLOUDY
• MOSTLY CLOUDY
• (flashing=stormy)

View the complete list of icons at www.AcuRite.com/acurite-icons.

Troubleshooting

If your AcuRite product does not operate properly after trying these steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.

Care & Maintenance

Display Unit Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt, and moisture. Clean ventilation ports regularly with a gentle puff of air.

Outdoor Sensor Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Specifications

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

1. This device may NOT cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

WARNING:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

Limited One Year Warranty

At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures will be of good material and workmanship, and free of defects when properly installed and operated for a period of one year from the date of purchase.

We recommend visiting www.AcuRite.com to register your product for the fastest service. Product registration does not waive the need to retain your original proof of purchase for warranty claims.

Chaney Instrument Co. warrants its products against defects in material and workmanship for one year from the date of purchase. Remedy is limited to repair or replacement of the defective item(s). Any product proven defective under normal use within one year of sale will be repaired or replaced by Chaney at its sole option, upon examination. The purchaser is responsible for all transportation costs and charges for returned goods. Chaney disclaims all responsibility for such costs.

This warranty does not cover normal wear and tear, damage from acts of nature, tampering, abuse, improper installation, shipping damage, or repairs/alterations by unauthorized representatives. This warranty is expressly in lieu of all other warranties, express or implied, including implied warranties of merchantability and fitness for a particular purpose. Chaney expressly disclaims liability for special, consequential, or incidental damages. Some states may not allow exclusion or limitation of incidental or consequential damages, so the above may not apply. Chaney also disclaims liability for personal injury related to its products to the extent permitted by law. By accepting Chaney's products, the purchaser assumes all liability for their use or misuse.

For in-warranty claims: Chaney Instrument Co., 965 Wells St., Lake Geneva, WI 53147.