HEMNES Bed Frame Assembly Instructions
This document provides instructions for assembling the IKEA HEMNES bed frame.
Parts List
Ensure you have all the following parts before beginning assembly:
- Step 1: 18x Wooden Dowels (105163), 8x Cam Dowels (118331), 4x Screws (100087), 4x Screws (111451), 1x Allen Key (101352), 8x Cam Locks (113434), 1x Wooden Dowel (122332)
- Step 2: 12x Wooden Dowels (191315), 16x Screws (110789), 6x Screws (105307), 4x Brackets (102335), 1x Wrench (100092), 2x Brackets (116791)
Assembly Steps
- Step 1: Attach the side rails to the headboard and footboard using the provided hardware. Insert wooden dowels (105163) into the pre-drilled holes. Insert cam dowels (118331) and secure with cam locks (113434).
- Step 2: Attach the center support rail. Insert wooden dowels (191315) and secure with screws (110789).
- Step 3: Attach the side rails to the headboard using cam dowels (113434) and cam locks (122332).
- Step 4: Attach the footboard to the side rails using wooden dowels (101352).
- Step 5: Slide the bed slats into the grooves on the side rails.
- Step 6: Secure the bed slats using cam locks (113434) and cam dowels (122332).
- Step 7: Attach the remaining side rail to the headboard and footboard using screws (118331).
- Step 8: Insert wooden dowels (101352) into the side rails.
- Step 9: Attach the center support rail to the headboard and footboard using cam locks (113434) and cam dowels (122332).
- Step 10: Secure the bed frame by tightening all cam locks.
- Step 11: Insert wooden dowels (101352) into the side rails.
- Step 12: Attach the headboard to the side rails using screws (100092) and the Allen key (101352).
- Step 13: Secure the footboard to the side rails using screws (100087).
- Step 14: Attach the headboard to the side rails using screws (111451).
- Step 15: Insert wooden dowels (101359) into the side panels.
- Step 16: Attach the side panels to the bed frame using screws (104875), brackets (100089), and nuts (102335). Use the wrench (100092) to tighten.
- Step 17: Insert wooden dowels (101359) into the side panels.
- Step 18: Attach the side panels to the bed frame using screws (104875), brackets (100089), and nuts (102335). Use the wrench (100092) to tighten.
- Step 19: Insert wooden dowels (101359) into the headboard.
- Step 20: Attach the headboard to the side rails using screws (104875), brackets (100089), and nuts (102335). Use the wrench (100092) to tighten.
- Step 21: Attach the side rails to the headboard and footboard using screws (110789).
- Step 22: Attach the center support rail brackets using screws (105307) and (116791).
- Step 23: Slide the center support rail into the attached brackets.
- Step 24: Place the bed slats onto the support rails.
- Step 25: Secure the bed slats using screws (117327).
- Step 26: Attach the side rails to the bed frame using screws (124401).
- Step 27: Secure the side rails using screws (117327).
- Step 28: Attach the side rails to the bed frame using screws (117327).
- Step 29: Insert wooden dowels (191315) and secure with screws (105163).
Final Check
Ensure all screws and cam locks are tightened securely. The bed frame is now assembled.