HM11 Bluetooth Speaker

Security Guidance

Before using the speaker, please read our specs clearly and keep it for future reference:

• Stay away from heat, sharp items and direct sunlight.
• Stay away from open fire.
• Do not insert any metal objects, avoid short circuit.
• Don't repair the product by yourself, please contact the authorized manufacturer to repair it.
• Avoid rain, spray and other liquids.
• If the product is overheated, damaged or falling into the liquid, stop using it.
• Use the product according to local standards and regulations.

Built-in Battery Care

• Product built-in rechargeable battery. The new battery only needs 2-3 hours for the first time to complete the charge and discharge cycles. Do not make the battery fully charged, because overcharging will shorten the life of the cycle of the speakers.
• If you do not use, power might loss a little.
• Products placed in hot or cold places will shorten the life of the product.

Charger Care

• Please use the standard 5V DC adapter to charge. Use of any other type may damage the product.
• Charging according to instructions.
• IMPORTANT: Please refer to the user's manual description of the charge status indicator. Some speakers cannot be used when charging.

Accessories

• 1* HM11 Bluetooth speaker
• 1* USB charging cable
• 1* audio cable
• 1* manual

Integrated Battery Charging

This Bluetooth speaker is equipped with an integrated rechargeable lithium battery.

1. Insert the charging cable DC 5V, connect the USB to the computer or AC / DC adapter. The LED indicator light turns red, meaning the speaker is in charge.
2. When the speaker is fully charged, the red indicator will turn off.

Pairing HM11 Bluetooth Speakers for Mobile Phones or Other Devices

Activate Bluetooth speaker pairing mode. With the speaker in shutdown mode, long press the power button for 3 seconds. The speaker begins to make a pairing. When booting into the paired connection, open the speaker. If the speaker was not previously connected with the phone or other Bluetooth devices, it will automatically enter wait mode for pairing. If the speaker and other Bluetooth devices were connected before, when starting up, it will automatically connect the last connection device.

Tips:

• Make sure the Bluetooth speaker is in boot mode and start activating the pairing.
• Turn on your phone and activate the Bluetooth function.
• Search for Bluetooth devices; 'HM11' will appear.
• Connect HM11. If a password is required, enter "0000", then HM11 will connect to your phone to start using.

Bluetooth Function Usage

• Turn On/Off: Long press for 4 seconds. The Bluetooth indicator light will flicker and enter Bluetooth match mode. To turn off, long press for 4 seconds.
• Play/Pause: Short press to alternate play and pause. Double press to change mode.
• When receiving a call: Short press to answer the call, double press to refuse the call.
• Double press to call the latest calling person when the speaker is in normal mode.
• Previous Music: Short press (refer to Pic 5).
• Next Music: Short press (refer to Pic 3).
• Volume Adjust: Rotate (refer to Pic 1) to adjust volume.

AUX External Audio

• AUX audio port (Pic 8).
• Insert the audio wire after turning on the speaker; it will automatically enter AUX mode.

USB Read

• USB port (Pic 9): Can insert USB to listen to music.

Troubleshooting

Specifications

• Bluetooth: V4.1 + EDR
• Range: 10 meters
• Frequency: 50HZ-22kHZ
• Power supply: DC 5V/600-800mA
• Battery: 3.7V/400mA lithium
• Charging time: Approx 2-3 hours
• Trumpet: 40MM 4Ω 3W
• Operating time: Approx 2-3 hours
• Unit weight: [Weight information not provided]

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.