MPOW BH188A Fitness Tracker Bottom Case Laser Engraving Diagram
Version: A0
Change Description: First Release
Date: 180127
Product Overview and Engraving Details
This document details the laser engraving specifications for the bottom case of the MPOW BH188A fitness tracker. The diagram provides a visual representation of the device with critical dimensions marked.
Key Dimensions: 9.1mm, 2.5mm, 3.0mm, 9.85mm, 12mm, and 1.8mm.
The device features regulatory compliance marks: CE (Conformité Européenne) and ♺ (WEEE - Waste Electrical and Electronic Equipment symbol).
Engraving Content Specifications
Model: BH188A
FCC ID: 2AMH2-BH188A
Font: Arial
Font Size: 4.5pt
Positioning: Centered on the bottom case.
Manufacturing & Quality Control Specifications
| Item Name | Part Name | Material Code | 3D Name | Dimension Range (mm) | Tolerance Range | Unit | Angular Tolerance | Drawn By | Date |
|---|---|---|---|---|---|---|---|---|---|
| BH188A | Bottom Case Laser Engraving | XXXX-XXXX | 0~10 | +/-0.05 | mm | +/- 0.25° | Jiang Wenfang | 180131 | |
| 10~50 | +/-0.10 | ||||||||
| 50~ | +/-0.15 |
| Page: 1/1 | Scale: 1:1 | Quantity: 1 [concentricity symbol] [geometric shape symbol] | Review: | Date: |
| Approval: | Date: |
Quality Control Notes:
- Dimensions marked with '*' are critical and require close inspection by Quality Control (QC). Dimensions without specified tolerances should be checked against the tolerance table.
- The product must not exhibit deformation, burrs, scratches, or other appearance defects.
- Reliability testing should be conducted according to customer specifications. If customer requirements are not provided, internal company standards will be followed.
