MPOW HC3 Wireless Headset

Product Overview

The MPOW HC3 is a wireless headset designed for audio and communication.

Package Contents

• Headset ×1
• 3.5mm Audio Cable ×1
• Thank You Card ×1
• Micro USB Cable ×1
• Instruction Guide ×1
• Charging Warning ×1

Diagram

The headset is depicted with numbered callouts: 1. Mic for Calling, 2. LED Indicator, 3. MFB (Multi-Function Button), 4. Mic for Noise Cancellation. Additional numbered components are shown: 5. Volume Up/Next Track, 6. Volume Down/Previous Track, 7. Charging Plug.

Specifications

Function Button Operations

The MFB (Multi-Function Button) controls various functions:

• Short Press: Play/Pause music ?, Answer/End call ?.
• Long Press (1-2s): Reject incoming call ?, Redial last number.
• Double Click: Activate Siri/Voice Assistant ?️.

Volume buttons:

• Short Press '+' or '-': Adjust volume up ⬆️ or down ⬇️.
• Long Press '+' or '-': Skip to next track ⏩ or previous track ⏪.

LED Indicator states:

• Pairing Mode (>5s): Blue light flashes slowly ?.
• Pairing Mode (>4s): Red and Blue lights flash alternatively ??.
• Charging: Red light on ?.
• Fully Charged: Blue light on ?.

Charging

To charge the headset, connect the Micro USB cable to the charging port on the headset and the other end to a DC 5V power source ?.

Output: DC 5V

Connection With Two Devices

The headset can connect to two Bluetooth ? devices simultaneously. The process involves pairing with the first device, then putting the headset into pairing mode again to connect to the second device. Finally, re-enable Bluetooth on the first device to establish the dual connection.

Note: If the first device is iOS, manual connection may be required for the second device. Android devices may connect automatically.

Win10 Compatibility Setting

To ensure compatibility with Windows 10, follow these steps:

1. Navigate to Windows 10 Control Panel ⚙️.
2. Select System.
3. Go to Sound settings ?.
4. Access Properties for the audio device.
5. Ensure "Mpow HC3" is selected as the audio output/input device.

Q&A

How to Pair if Failed?

In standby mode, simultaneously press and hold the MFB and Volume- buttons for 4 seconds ⏳ to clear the pairing record. Then, long-press the MFB until the blue and red indicator lights flash alternatively ?? to pair again.

Any Password Needed when Pairing?

If a password is required, try 0000, 8888, 1111, or 1234.

How Can I Charge My Headset?

You can charge the headset using the provided USB cable ?.

How to Restart the Headset if Failed?

Try charging the headset via the USB cable ? and then restarting it.

Warranty Information

Mpow offers a 45-day money-back guarantee and a 24-month worry-free guarantee.

For after-service, email: support@xmpow.com

Customer Service Phone: 1-844-869-3583

FCC Statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference ❌, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.