LIVARNO home Tall Bathroom Cabinet
This document provides assembly instructions for the LIVARNO home Tall Bathroom Cabinet (Model: Hochschrank / Komód / Armario para cuarto de baño, etc.).
Safety Instructions
Warning: Improper assembly can lead to safety risks. Assembling by qualified personnel is recommended. To prevent tipping over, this product must be used with the supplied wall bracket. Ensure the wall material is suitable for the fixings.
Care Instructions
Please clean only with a dry duster or a damp cloth. Do not use abrasive cleaning agents.
Intended Use
This product is intended for household use in private living areas.
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 1 | Base Panel (with drawer runners) | 1 |
| 2 | Back Panel | 1 |
| 3a, 3b | Side Panels | 2 |
| 4a, 4b | Doors | 2 |
| 5a, 5b | Side Panels | 2 |
| 6 | Top Panel | 1 |
| 7 | Shelves | 3 |
| 8 | Bottom Panel | 1 |
| 9 | Shelves | 2 |
| 10 | Base Supports | 2 |
Hardware
| Code | Description | Quantity |
|---|---|---|
| A | Cam Lock | 8 |
| B | Screw (8 x B) | 16 |
| C | Dowel (4 x C) | 4 |
| D | Hinge (3.5 x 15mm) | 10 |
| E | Shelf Pin (12 x E) | 12 |
| F | Hinge | 5 |
| G | Hinge | 5 |
| H | Screw (4 x H) | 4 |
| I | Screw (8 x I) | 8 |
| J | Screw (16 x J) | 16 |
| M | Screw (1 x M) | 1 |
| N | Screw (1 x N) | 1 |
| O | Hinge Cap | 5 |
| P | Dowel (4 x P) | 4 |
| Q | Dowel (4 x Q) | 4 |
| R | Hinge Part | 2 |
| S | Hinge Part | 4 |
Assembly Instructions
Step A: Prepare Base Panels
Attach base supports (Part 10) to the bottom panel (Part 8) using screws (8 x B, 8 x I) and dowels (4 x P). Ensure correct orientation as shown in the diagram.
Step B: Prepare Other Base Panels
Attach base supports (Part 9) to another panel (Part 9) using screws (8 x B).
Step C: Attach Side Panels (3a, 3b)
Insert cam bolts into panels 3a and 3b. Insert cam locks into the corresponding larger holes on the base/top panels. Connect side panels 3a and 3b to the base/top panels and secure by turning the cam locks.
Step D: Attach Side Panels (5a, 5b)
Repeat the process from Step C to attach side panels 5a and 5b using cam bolts and cam locks.
Step E: Assemble Main Cabinet Frame
Connect side panels (3a, 3b) to the base panel (Part 10). Insert dowels and secure with cam locks. Slide the back panel (Part 2) into the grooves on the side panels. Insert shelf (Part 9).
Step F: Attach Top Panel and Shelf
Attach the top panel (Part 8) to the assembled frame, securing it with dowels and cam locks. Insert another shelf (Part 9).
Step G: Reinforce Structure
Secure the cabinet structure by screwing through pre-drilled holes on the side panels into the edges of the shelves and panels using screws (6 x K, 6 x L) at the specified distances (150mm, 350mm).
Step H: Wall Mounting
Attach the wall bracket to the cabinet using screws (1 x M, 1 x N). Position the cabinet against the wall. Mark the wall through the bracket holes. Drill holes in the wall, insert appropriate wall plugs (not supplied), and secure the bracket to the wall. Ensure the wall material is suitable for the fixings.
Step I: Insert Shelves
Insert shelf pins (12 x E) into the pre-drilled holes inside the cabinet at the desired height. Place the shelves (Part 7) onto the shelf pins.
Step J & K: Attach Doors
For Doors 1a & 4a (Steps J1/K1): Attach hinges (Parts D, F, G, O, S) to doors 1a and 4a. Attach corresponding hinge plates to the cabinet frame. Mount the doors onto the cabinet by connecting the hinges to the plates. Adjust hinges for proper door alignment.
For Doors 1b & 4b (Steps J2/K2): Repeat the hinge attachment process for doors 1b and 4b.
Product Information
Manufacturer: FMD Möbel GmbH, Heidländer Weg 68, 49201 Dissen, Germany
IAN / Serial Number: 367051
Service/Import: Lidl Magyarország Kereskedelmi Bt., H-1037 Budapest, Rádl árok 6
Customer Service: 06 80 020 534
