LIVARNO home Vitrine

Parts and Hardware List

Assembly Instructions

Please follow these steps carefully to assemble your Vitrine.

Step A: Base Assembly

Attach the four base blocks (part 4) to the base panel using 8 x B ? and 8 x I ? screws. Then, attach the two side panels (part 3) to the base panel using 4 x P ? screws.

Step B: Prepare Panels

Insert 8 cam lock bolts (A) into the designated holes on the panels. Secure with 8 x C ? screws.

Step C: Connect Base and Sides

Insert 8 dowels (E) ⚪ into the base panel (part 4). Connect the two side panels (part 3) to the base panel, aligning the cam lock bolts with the corresponding holes.

Step D: Attach Back and Top Panels

Slide the back panel (part 2) into the grooves on the side panels. Place the top panel (part 5) onto the assembled frame and secure it.

Step E: Install Shelves

Insert 8 dowels (E) ⚪ into the side panels. Position the shelves (part 6) and secure them using 4 x K ? and 4 x L ? screws.

Step F: Wall Mounting

Secure the cabinet to the wall using the provided wall bracket and attachment hardware (1 x M handle, 1 x N screw). Ensure the wall material is suitable for mounting. ⚠️

Step G1: Attach Hinges to First Door

Attach 6 hinges (D) ?, 3 hinges (F) ?, 3 hinges (G) ?, and 3 hinges (O) ? to the door (part 1a) using the provided screws. Cover hinge bases with 3 caps (Q) ?.

Step H1: Mount First Door

Attach hinge plates (part R) to the cabinet's side panel using 2 x H ? and 8 x J ? screws. Mount the door assembly onto the hinge plates.

Step G2: Attach Hinges to Second Door

Attach 6 hinges (D) ?, 3 hinges (F) ?, 3 hinges (G) ?, and 3 hinges (O) ? to the second door (part 1b) using the provided screws. Cover hinge bases with 3 caps (Q) ?.

Step H2: Mount Second Door

Attach hinge plates (part R) to the cabinet's other side panel using 2 x H ? and 8 x J ? screws. Mount the second door assembly onto the hinge plates.

Safety and Care Instructions

Safety

⚠️ Warning: Deficient assembly causes safety risks. Assembling by qualified personnel is recommended. To prevent tipping over, use this product with the supplied wall bracket.

Care Instructions

? Please clean only with a duster or a damp cloth. Do not use any scouring agents!

Intended Use

? The appliance is intended for household use.

Warranty Information

This product is guaranteed for 3 years from the date of purchase. In case of product defects, you have legal rights against the seller. These legal rights are not limited by our warranty described below.

The warranty period begins on the date of purchase. Please keep the original receipt safe as proof of purchase. If a material or manufacturing defect occurs within three years of the purchase date, the product will be repaired or replaced free of charge at our discretion, or the purchase price will be refunded. This warranty service requires the defective product and proof of purchase (receipt) to be presented within three years, along with a brief written description of the defect and when it occurred.

If the defect is covered by our warranty, you will receive the repaired or a new product back. Repair or replacement does not start a new warranty period.

This warranty is void if the product is damaged, not used or maintained correctly. For proper use, follow all instructions in the manual. Avoid recommended or warned-against uses and actions. The product is intended exclusively for private use, not commercial use. Improper use, incorrect handling, use of force, and interventions not performed by our authorized service center will void the warranty.

To ensure prompt processing of your claim, please have your receipt and article number (e.g., IAN 123456_7890) ready for all inquiries. The article number can be found on the product's rating plate, the manual's title page, or a sticker on the back or bottom of the product. In case of functional failures or other defects, contact the service department first by phone or email. A product recognized as defective can be returned with the proof of purchase (receipt), indicating the nature and timing of the defect, postage-paid to the provided service address.

Manufacturer and Contact Information

Manufacturer: FMD Möbel GmbH, Heidländer Weg 68, D-49201 Dissen a.T.W.

Contact: info@fmd-moebel.de, +49 5421 9448-44

Importer/Distributor: Lidl Magyarország Kereskedelmi Bt., H-1037 Budapest, Rádl árok 6

Customer Service: 06 80 020 534