COSTWAY TL27324 Motorcycle Rear Wheel Stand
User Manual
This document provides instructions for the assembly and use of the COSTWAY TL27324 Motorcycle Rear Wheel Stand. Please read all instructions carefully before use.
Diagram: World Map A world map illustrating COSTWAY's global presence, with markers or labels indicating distribution in Canada, United States, United Kingdom, Spain, Germany, France, Italy, Russia, Japan, and Australia.
Product Overview & Contact Information
The COSTWAY Motorcycle Rear Wheel Stand is designed to securely lift the rear wheel of your motorcycle, facilitating maintenance, cleaning, and storage. COSTWAY is committed to providing an easy shopping experience, good products, and efficient service.
Customer Feedback: Your suggestions and comments are important. Please consider leaving a good rating after your purchase.
Office Locations:
- US office: Fontana
- UK office: Ipswich
- DE office: FDS GmbH, Neuer Höltigbaum 36, 22143 Hamburg, Deutschland
- FR office: 26 RUE DU VERTUQUET, 59960 NEUVILLE EN FERRAIN, FRANCE
Accessories
Diagram: Motorcycle Rear Wheel Stand Components A visual representation of the COSTWAY Motorcycle Rear Wheel Stand. It features a robust metal frame with two wheels at the base for mobility. Two adjustable paddle adaptors are positioned at the top, designed to cradle the motorcycle's swingarm. A handle is located at the rear for leverage. Numbered parts correspond to the list below.
The following parts are included:
- 1. Main frame (1 PC)
- 2. Frame with wheels (2 PCS)
- 3. Paddle adaptors (2 PCS)
- 4. Screw (2 PCS, 8x45.5mm)
- 5. Washer (2 PCS)
- 6. Locknut (2 PCS)
- 7. Screw with plastic topper (2 PCS, 8x26.7mm)
Assembly Instructions
Follow these steps to assemble the motorcycle stand:
- Insert both pieces of the frame with wheels into the main frame.
- Ensure the frames are pushed together as much as possible. Push the screw through the aligned holes and add a washer on each side. Then, use tools to tighten with the locknuts.
- Insert the paddle adaptors onto the top of the frame with wheels, then tighten the screw with the plastic topper.
Operation / Guide to Using
Follow these steps to use the motorcycle stand:
- Roll the stand and ensure your motorcycle's rear wheel is positioned in the middle of the frame.
- Loosen the screws with the plastic topper while holding the adaptors in place.
- Adjust the position of the paddle adaptors to match the width of your motorcycle's dual swingarm, then tighten the screw with the plastic topper.
- Raise the stand using the circled handle and move it to the position under the swingarm. Press down on the stand to raise your motorcycle. Ensure the paddle adaptors are snug against the swingarm.
Important Safety Information
Please observe the following important points:
- ⚠️ Always keep this stand away from children.
- Check that the stand is in good condition before using it.
- It is recommended to have a friend or family member help hold your motorcycle when using this stand.
