Ninja Foodi Grill

Thank You

Thank you for purchasing the Ninja® Foodi™ Grill.

Register Your Purchase: AU ninjakitchen.com.au, NZ ninjakitchen.co.nz

Record This Information:
Model Number:
Serial Number:
Date of Purchase: (Keep receipt)
Store of Purchase:

TIP: You can find the model and serial numbers on the label located on the back of the unit by the power cord.

Technical Specifications:
Voltage: 230V~50Hz
Watts: 1760W

Important Safeguards

HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE

Read and review instructions for operation and use.

Take care to avoid contact with hot surfaces. Always use hand protection to avoid burns.

For indoor and household use only.

Read all instructions before using your Ninja® Foodi™ Grill.

When using electrical appliances, basic safety precautions should always be followed:

▲ WARNING

1. Remove and discard the protective cover fitted on the power plug of this appliance.
2. This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
3. Keep the appliance and its cord out of reach of children. DO NOT allow the appliance to be used by children. Close supervision is necessary when used near children.
4. This appliance is for household use only. DO NOT use this appliance for anything other than its intended use. DO NOT use in moving vehicles or boats. DO NOT use outdoors. Misuse may cause injury.
5. Ensure the surface is level, clean and dry. DO NOT place the appliance near the edge of a countertop during operation.
6. ALWAYS ensure the appliance is properly assembled before use.
7. When using this appliance, provide at least 6 inches (15.25 cm) of space above and on all sides for air circulation.
8. DO NOT use an extension cord. A short power-supply cord is used to reduce the risk of children grabbing the cord or becoming entangled and to reduce the risk of people tripping over a longer cord.
9. To protect against electrical shock, DO NOT immerse cord, plugs, or main unit housing in water or other liquid.
10. DO NOT use the appliance if there is damage to the power cord or plug. Regularly inspect the appliance and power cord. If the appliance malfunctions or has been damaged in any way, immediately stop use and call Customer Service.
11. NEVER use outlet below countertop surface.
12. DO NOT place appliance and let cord hang over edges of tables, counters or touch hot surfaces.
13. Only use recommended accessories included with this appliance or authorized by SharkNinja. The use of accessories or attachments not recommended by SharkNinja may cause a risk of fire or injury.
14. Before placing any accessory into the cooker, ensure they are clean and dry.
15. DO NOT use the appliance without the removable cooking pot and splatter shield installed.
16. ALWAYS ensure hood is fully closed before operating.
17. DO NOT move the appliance when in use.
18. DO NOT cover the air intake vent or air outlet vent while unit is operating. Doing so will prevent even cooking and may damage the unit or cause it to overheat.
19. DO NOT touch hot surfaces. Appliance surfaces are hot during and after operation. To prevent burns or personal injury, ALWAYS use protective hot pads or insulated oven mitts and use available handles and knobs.
20. DO NOT touch accessories during or immediately after cooking. The grill plate and basket become extremely hot during the cooking process. Avoid physical contact while removing the accessory from the appliance. To prevent burns or personal injury ALWAYS use care when interfacing with product. Recommend use of long-handed utensil and protective hot pads or insulated oven mitts.
21. DO NOT use this appliance for deep-frying.
22. To prevent possible illness, ALWAYS use a thermometer to check that your food is cooked to the recommended temperatures.
23. Should a grease fire occur or the unit emits black smoke, unplug immediately. Wait for smoking to stop before removing any cooking accessories.
24. Please refer to the Cleaning & Maintenance section for regular maintenance of the appliance.
25. To disconnect, turn any control to “off”, then unplug from socket when not in use and before cleaning. Allow to cool before cleaning, disassembly, putting in or taking off parts and for storage.
26. DO NOT clean with metal scouring pads. Pieces can break off the pad and touch electrical parts, creating a risk of electric shock.
27. Cleaning and user maintenance shall not be made by children.
28. DO NOT place on or near a hot gas or electric burner or in a heated oven.
29. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.

SAVE THESE INSTRUCTIONS

Parts

The Ninja Foodi Grill includes the following parts:

• Ceramic-Coated Grill Plate
• Ceramic-Coated Crisper Basket
• Ceramic-Coated Cooking Pot
• Hood
• Splatter Shield (Removable)
• Main Unit (Power cord not shown)
• Control Panel
• Air Intake Vent
• Air Outlet
• Grease Collector
• Cleaning Brush with Scraper

NOTE: Additional accessories are available for purchase at AU ninjakitchen.com.au – NZ ninjakitchen.co.nz

Getting to Know Your Foodi™ Grill

The control panel display shows time in an HH:MM format.

Function Buttons

NOTE: Not all functions are included on every model.

• GRILL: Grill indoors while creating even char, grill marks, and grilled flavour.
• AIR FRY: For crispiness and crunch with little to no oil.
• ROAST: Tenderize meats, roast vegetables, and more.
• BAKE: Use to bake cakes, treats, desserts, and more.
• DEHYDRATE: Dehydrate meats, fruits, and vegetables for healthy homemade snacks.

Operating Buttons

• POWER button [power]: Once the unit is plugged in, press the power button to turn on the unit. Pressing it during cooking stops the current cooking function and turns off the unit.
• TEMP arrows (▲/▼): Use the up and down TEMP arrows to adjust the cooking temperature in any function. When using the Grill function, toggle the GRILL button or use the up and down arrows to adjust cooking temperature.
• TIME arrows (▲/▼): Use the up and down TIME arrows to adjust the cook time in any function.

NOTE: To adjust temperature or time during cooking, press the up and down arrows. The unit will then resume at those settings.

• START/STOP button: After selecting temperature and time, press the START/STOP button to begin cooking.

STANDBY MODE: The unit will power off if cooking is not in process and there has been no interaction with the control panel for 10 minutes.

Before First Use

1. Remove all packaging material, promotional labels, and tape from the unit.
2. Remove all accessories from the package and read this manual carefully. Please pay particular attention to operational instructions, warnings, and important safeguards to avoid any injury or property damage.
3. Wash the grill plate, splatter shield, crisper basket, cleaning brush and cooking pot in warm, soapy water, then rinse and dry thoroughly. The grill plate, splatter shield, crisper basket, cleaning brush and cooking pot are also dishwasher safe. NEVER clean the main unit in the dishwasher.

Using Your Foodi™ Grill

Splatter Shield

Located on the underside of the hood, the splatter shield keeps the heating element clean and prevents smoking. The splatter shield is removable for cleaning, but it is recommended to keep it in place when cooking.

Removing the Splatter Shield

Allow the splatter shield to cool completely. Use your thumb to release the front clip by pushing it upward, then use your other hand to pull one of the tabs toward you. This will release the splatter shield, allowing you to pull it out of the slot along the back of the hood.

Installing the Splatter Shield

Gently push the splatter shield into the back of the hood. Insert the back tab on the shield with the slot on the back of the hood. Then push the splatter shield upward until it clicks into the clip on the front of the hood.

GrillControl Technology

This technology allows you to control the temperature of the grill plate for precise cooking and to keep smoke out of the kitchen. When using the Grill function, select the grill plate temperature setting. Recommended temperature levels for common ingredients:

• LOW (200°C): Bacon, Frozen sauce, Calzones
• MEDIUM (230°C): Steaks, Veggies, Meats, Sausages, Chicken, Fruit, Marinated/sauced meat, Burgers, Pizzas, Hot dogs, Fresh/barbecue Seafood, Kebobs
• HIGH (260°C)
• MAX (up to 265°C)

NOTE: The unit could create smoke during the cooking process. For less smoke, we recommend using canola, coconut, avocado, grapeseed, or vegetable oil instead of olive oil.

NOTE: The unit may produce smoke when cooking meats on a hotter setting than recommended. For more cooking charts, refer to your Inspiration Guide or visit AU ninjakitchen.com.au or NZ ninjakitchen.co.nz.

Switching to Grill after using another function

If the unit is already warm from using a different function, and the grill plate is at room temperature when you place it in the unit, "Add Food” may appear on the screen immediately. We recommend allowing the grill plate to heat up for at least 6 minutes before placing ingredients on it. As the unit continues to run and the grill plate heats up, “Add Food” will remain on the screen until you open the hood and place ingredients on the plate.

Batch Grilling

When grilling more than two consecutive batches of food, it is recommended that you empty the fat/oil from the removable cooking pot. This will help prevent grease from burning and causing smoke. We also recommend allowing the grill plate to heat back up for at least 3-5 minutes between batches to ensure consistent grill marks and char.

Cooking Functions

Ensure the unit is plugged in before turning it on. Press the power button [power].

Grill

1. Place the cooking pot in the unit with the indent on the pot aligned with the rear bump on the main unit. Then place the grill plate in the pot with the handles facing up. Ensure the splatter shield is in place and close the hood.
2. Press the GRILL button. The default temperature level will illuminate on the left side of the control panel and the corresponding air temperature will appear on the display screen. Press the Grill button or the up and down TEMP arrows (▲/▼) to adjust the temperature setting.
3. Press the up and down TIME arrows (▲/▼) to set the cooking time in one-minute increments, up to 30 minutes.
4. Press the START/STOP button to begin preheating. PRE will appear on the display screen, and the progress bar will begin. It can take about 8 minutes to preheat, depending on the selected temperature setting.
5. When preheating is complete, the unit will beep and “Add Food” will flash across on the display screen.
6. Open the hood and place ingredients on the grill plate. Once the hood is closed, cooking will begin and the timer will start counting down.

NOTE: During cooking, you can open the hood to check on or flip your food. The timer will pause when the hood is opened and then automatically resume after it is closed.

7. When cook time is complete, the unit will beep and END will appear on the display screen. Keep the hood open after removing your food so the unit will cool down more quickly. The stainless steel wrap on the exterior of the unit will be hot after cooking. If you need to cook your food longer, simply press the TIME up arrow (▲) to add more time, then press the START/STOP button.

NOTE: If batch cooking, empty the oil from the removable cooking pot after every 2 batches. This will help prevent grease from burning and causing smoke.

Air Fry

1. Place cooking pot in the unit with the indent on the pot aligned with the bump on the main unit. Place the crisper basket in the pot, then close the hood.

NOTE: While preheating is strongly recommended for best results, you can skip it by pressing the AIR FRY button again. "Add Food” will flash across the screen. Open the hood and place ingredients in the crisper basket. Once the hood is closed cooking will begin and the timer will start counting down. Skip to step 7 for further instructions.

2. Press the AIR FRY button. The default temperature setting will display. Use the up and down TEMP arrows (▲/▼) to adjust the temperature.
3. Use the up and down TIME arrows (▲/▼) to set the cook time, in 1-minute increments, up to 1 hour.
4. Press the START/STOP button to begin preheating. PRE will appear on the display screen, and the progress bar will begin. It can take up to 3 minutes to preheat, depending on the selected temperature setting.
5. When preheating is complete, the unit will beep and "Add Food” will flash across on the display screen.
6. Open the hood and place ingredients in the crisper basket. Once the hood is closed, cooking will begin and the timer will start counting down.
7. For best results, we recommend shaking ingredients frequently. When you open the hood, the unit will pause. Use silicone-tipped tongs when tossing your food or oven mitts to shake the basket. When done, replace the basket and close the hood. Cooking will automatically resume after hood is closed.
8. When cook time is complete, the unit will beep and END will appear on the display screen. Keep the hood open after removing your food so the unit will cool down more quickly. The stainless steel wrap on the exterior of the unit will be hot after cooking. If you need to cook your food longer, simply press the TIME up arrow (▲) to add more time, then press the START/STOP button.

Roast

1. Place cooking pot in the unit with the indent on the pot aligned with the bump on the main unit, then close the hood.

NOTE: While preheating is strongly recommended for best results, you can skip it by pressing the ROAST button again. "Add Food” will flash across the screen. Open the hood and place ingredients in the crisper basket. Once the hood is closed cooking will begin and the timer will start counting down.

2. Press the ROAST button. The default temperature setting will display. Use the up and down TEMP arrows (▲/▼) to adjust the temperature.

NOTE: To convert conventional oven recipes, reduce the temperature by 25°F. Check food frequently to avoid overcooking.

3. Use the up and down TIME arrows (▲/▼) to set the cook time, in 15-minute increments, up to 4 hours.
4. Press the START/STOP button to begin preheating. PRE will appear on the display screen, and the progress bar will begin. It can take up to 3 minutes to preheat, depending on the selected temperature setting.
5. When preheating is complete, the unit will beep and "Add Food” will flash across on the display screen.
6. Open the hood and place ingredients in the pot. Once the hood is closed, cooking will begin and the timer will start counting down.

NOTE: During cooking, you can open the hood to check on your food. The timer will pause when the hood is opened and then automatically resume after it is closed.

7. When cook time is complete, the unit will beep and END will appear on the display screen. Keep the hood open after removing your food so the unit will cool down more quickly. The stainless steel wrap on the exterior of the unit will be hot after cooking. If you need to cook your food longer, simply press the TIME up arrow (▲) to add more time, then press the START/STOP button.

Bake

1. Place cooking pot in the unit so the indent on the pot aligned with the bump on the main unit, then close the hood.
2. Press the BAKE button. The default temperature setting will display. Use the up and down TEMP arrows (▲/▼) to adjust the temperature.

NOTE: To convert conventional oven recipes, reduce the temperature by 25°F. Check food frequently to avoid overcooking.

3. Use the up and down TIME arrows (▲/▼) to set the cook time, in 15-minute increments, up to 4 hours.
4. Press the START/STOP button to begin preheating. PRE will appear on the display screen, and the progress bar will begin. It can take up to 3 minutes to preheat, depending on the selected temperature setting.

NOTE: While preheating is strongly recommended for best results, you can skip it by pressing the BAKE button again. "Add Food" will flash across the screen. Open the hood and place ingredients in the crisper basket. Once the hood is closed cooking will begin and the timer will start counting down.

5. When preheating is complete, the unit will beep and “Add Food” will flash across on the display screen.
6. Open the hood and add ingredients to the pot or set your bake pan* directly in the bottom of the pot, and close the hood to start cooking. Once the hood is closed, cooking will begin and the timer will start counting down.

*Bake pan is not included

NOTE: During cooking, you can open the hood to check on your food. The timer will pause when the hood is opened and then automatically resume after it is closed.

7. When cook time is complete, the unit will beep and END will appear on the display screen. Keep the hood open after removing your food so the unit will cool down more quickly. The stainless steel wrap on the exterior of the unit will be hot after cooking. If you need to cook your food longer, simply press the TIME up arrow (▲) to add more time, then press the START/STOP button.

Dehydrate

NOTE: The Dehydrate function is not included on all models.

1. Place cooking pot in the unit with the indent on the pot aligned with the bump on the main unit, then add a single layer of ingredients to the bottom of the pot. Place the crisper basket in the pot and add a layer of ingredients to the bottom of the basket. Close the hood.
2. Press the DEHYDRATE button. The default temperature setting will display. Use the up and down TEMP arrows (▲/▼) to set your desired temperature.
3. Use the up and down TIME arrows (▲/▼) to set the dehydration time, in 15-minute increments, up to 12 hours.
4. Press the START/STOP button to begin. The unit does not need to preheat.

NOTE: During dehydration, you can open the hood to check on your food. The timer will pause when the hood is opened and then automatically resume after it is closed.

5. When dehydration time is complete, the unit will beep and END will appear on the display screen. Remove your food and close the hood.

Cleaning Your Foodi™ Grill

The unit should be cleaned thoroughly after every use. Always let the appliance cool before cleaning.

• Unplug the unit from the wall outlet before cleaning. Keep the hood open after removing your food so the unit will cool down more quickly.
• To clean the main unit and control panel, wipe them with a damp cloth.
• The cooking pot, grill plate, crisper basket, splatter shield, cleaning brush, and any other included Ninja Foodi Grill accessories are dishwasher safe.

NOTE: NEVER use abrasive tools or cleaners. NEVER immerse the main unit in water or any other liquid.

• If hand-washing, use the cleaning brush to help wash the parts. Use the opposite end of the cleaning brush as a scraper to assist with releasing baked-on sauces or cheese. Air-dry or towel-dry all parts after hand-washing.
• If food residue or grease are stuck on the grill plate, splatter shield, or any other removable part, place them in a sink or stack them in the pot and fill with warm, soapy water and allow to soak for a couple hours or overnight. After soaking, use the cleaning brush to clean each part.
• Over time, the splatter shield front tabs and frame may accumulate grease buildup. Soaking the splatter shield overnight will help soften the baked-on grease. After soaking, use the cleaning brush to remove the grease from the stainless steel frame and front tabs.

Troubleshooting Guide

• "Add Food” appears on the control panel display: The unit has completed its Grill preheating and it is now time to add your ingredients.
• "Shut Lid" appears on the control panel display: The hood is open and needs to be closed for the selected function to start.
• "Add Pot" appears on the control panel display: The pot is not installed in the unit.
• “E” appears on the control panel display: The unit is not functioning properly. Please contact Customer Service at AU 02 88017666 - NZ 0800 112 660.
• Why do blinking lights appear after I press the START/STOP button?: This is a progress bar indicating how far along you are in the preheating cycle.
• Why does the preheat progress bar not start from the beginning?: When the unit is warm from previously being used, it will not require the full preheating time.
• Should I add my ingredients before or after preheating?: Let the unit preheat before adding ingredients.
• Why is my unit emitting smoke?: When using the Grill function, always select the recommended temperature setting. Recommended settings can be found in the Quick Start Guide and in the Inspiration Guide. Make sure the splatter shield is installed.
• How do I pause the unit so I can check my food?: When the hood is opened during a cooking function, the unit will automatically pause.
• My food is burned: Do not add food until preheating is complete. For best results, check progress throughout cooking, and remove food when desired level of brownness has been achieved. Remove food immediately after the cook time is complete to avoid overcooking.
• My food didn't cook when air frying: For consistent browning, make sure ingredients are arranged in an even layer on the bottom of the crisper basket with no overlapping. Shake loose ingredients during cooking for consistent crispiness.
• Why is my food blowing around when air frying?: Occasionally, the fan will blow lightweight foods around. To prevent this, secure loose food (like the top slice of bread on a sandwich) with toothpicks.
• Can I air fry fresh battered ingredients?: Yes, but use the proper breading technique. It is important to coat foods first with flour, then with egg, and then with bread crumbs. Be sure to press the bread crumbs onto the food so they stick in place. Loose breading may be blown off by the unit's powerful fan.
• The control panel display is no longer illuminated: The unit is off. Press the power button [power] to turn it back on.
• Can I cancel or override preheating?: Preheating is highly recommended for best results. Skip preheating by selecting the function again after you press the START/STOP button. However, you cannot override preheating when using the Grill function.
• How can I deep clean the splatter shield?: The splatter shield should be cleaned after each use and is dishwasher safe. Over time, the splatter shield front tabs and frame may accumulate grease buildup. Soaking the splatter shield overnight will help soften the baked-on grease. After soaking, use the cleaning brush to remove the grease from the stainless steel frame and front tabs.

REPLACEMENT PARTS

To order additional parts and accessories, visit AU ninjakitchen.com.au – NZ ninjakitchen.co.nz or contact Customer Service at AU 02 88017666 - NZ 0800 112 660.

Warranty

ONE (1) YEAR LIMITED REPLACEMENT WARRANTY

For guarantee claims, you will need to submit a proof of purchase in the form of a valid receipt that displays date and place of purchase. This warranty does not replace but is in addition to your statutory rights.

If your product becomes defective due to faulty material or workmanship within a period of 1 year from the date of purchase, we warrant to do the following:

• For New Zealand Consumers: We will replace the defective/faulty part with a new product, free of charge, or if the unit is deemed defective/faulty we replace the unit with an equivalent or upgraded model, at our discretion.
• For Australian Consumers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Replacement items will be covered by the limited warranty for the balance of the warranty period from the date of the original purchase.

Your warranty is subject to the following conditions

• DO NOT operate the appliance with a damaged plug or cord, or if the unit has been dropped, damaged or dropped in water.
• To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance on your own. If the supply cord is damaged, it must be replaced by a qualified electrician to avoid a hazard. Incorrect re-assembly or repair can cause a risk of electric shock or injury to persons when the appliance is used.
• The item has not been misused, abused, neglected, altered, modified or repaired by anyone.
• The item has been subjected to fair wear and tear.
• The item has not been used for trade, professional or hire purposes.
• The item has not sustained damage through foreign objects, substances or accident.

Customer costs within warranty

The customer is responsible for any inwards freight charge to return a product for warranty if requested, and outward freight charge for warranty parts and or replacement unit.

Who is covered?

This warranty applies only to the original purchaser, who bought the product from an authorised retailer and may not be transferred. Proof of purchase is required.

What is not covered?

• Accessories supplied with the item.
• Components that are subject to natural wear and tear caused by normal use in accordance with operating instructions.
• Unauthorised/improper maintenance/handling or overload is excluded from this warranty.