Salter 9L Dual Air Fryer

Description of Parts

The Salter 9L Dual Air Fryer features a main unit with two independent cooking compartments, each equipped with a handle. A digital control panel is located on the front of the unit.

Key Components:

• 1. Cooking compartment (qty. 2)
• 2. Non-stick coated cooking trays (qty. 2)
• 3. Cooking compartment handles (1 & 2)
• 4. Digital control panel
• 5. Temperature control buttons (+/-)
• 6. Time control buttons (+/-)
• 7. Function buttons
• 8. Sync Cook button
• 9. Compartment buttons (1 & 2)
• 10. Match Cook button
• 11. Power button
• 12. Start button
• 13. Stop button
• 14. LED display

Safety Instructions

Always follow basic safety precautions when using electrical appliances:

• Ensure your mains voltage matches the appliance's rating plate.
• Children aged 8 and above, or those with reduced capabilities, can use the appliance under supervision and with instruction.
• Supervise children to ensure they do not play with the appliance.
• Children should not perform cleaning or maintenance unless supervised and over 8 years old.
• This appliance is not a toy.
• If the power supply cord, plug, or any part is malfunctioning or damaged, cease use immediately to avoid injury.
• The appliance contains no user-serviceable parts; repairs should only be carried out by a qualified electrician.
• Keep the appliance and its power cord out of reach of children, especially when in use or cooling down.
• Keep the appliance and cord away from heat sources and sharp edges.
• Keep the power cord away from hot parts of the appliance.
• Keep the appliance away from other heat-emitting appliances.
• Do not immerse electrical components in water or other liquids.
• Do not operate with wet hands.
• Do not leave the appliance unattended while connected to the mains power supply.
• To disconnect, switch off and remove the plug by hand; do not pull the cord.
• Do not pull or carry the appliance by its power cord.
• Use only for its intended purpose and with supplied accessories.
• Do not use this appliance outdoors.
• Do not store in direct sunlight or high humidity conditions.
• Do not move the appliance while in use.
• Do not touch hot surfaces or heating components during use.
• Use only heat-resistant plastic or wooden spatulas to avoid damaging the non-stick surface.
• Switch off and disconnect from the mains power supply before changing attachments.
• Ensure the appliance has cooled fully before cleaning, maintenance, or storing.
• Always use on a stable, heat-resistant surface at a comfortable height.
• Use of an extension cord is not recommended.
• Do not operate via an external timer or remote-control system not supplied with the appliance.
• This appliance is intended for domestic use only.
• The outer surface may get hot during operation.

Automatic Switch-off

The air fryer has an automatic switch-off feature that activates when the set cooking time has elapsed, indicated by a timer sound.

Dos and Don'ts

DO:

• Check that the cooking compartments are securely fitted before use.
• Only hold the cooking compartments by the handles.
• Take care when removing compartments, as steam may be emitted.

DON'T:

• Invert the cooking compartments with the non-stick coated cooking trays still attached, as excess oil may collect at the bottom.
• Cover the air fryer or its air inlets, as this will disrupt airflow and affect cooking results.

Care and Maintenance

Before cleaning or maintenance, switch off and unplug the air fryer from the mains power supply and allow it to cool fully.

1. STEP 1: Wipe the air fryer main unit with a soft, damp cloth and dry thoroughly.
2. STEP 2: Clean the non-stick coated cooking trays and the cooking compartments in warm, soapy water, then rinse and dry thoroughly.

Do not immerse the air fryer main unit in water or any other liquid.

Never use harsh or abrasive cleaning detergents or scourers, as this could cause damage.

Instructions for Use

Before First Use

1. STEP 1: Before connecting to the mains power supply, wipe the air fryer main unit with a soft, damp cloth and dry thoroughly.
2. STEP 2: Clean the non-stick coated cooking trays and cooking compartments in warm, soapy water, then rinse and dry thoroughly.
3. STEP 3: Place the air fryer main unit onto a stable, heat-resistant surface at a height comfortable for the user.

Assembling the Air Fryer

1. STEP 1: Fit the non-stick coated cooking trays into the cooking compartments, ensuring they are secure.
2. STEP 2: Slide the cooking compartments into the air fryer main unit, checking that the compartment numbers match the display numbers.

Using the Control Panel

When the air fryer is plugged in and switched on at the mains, the unit will beep and the power button will illuminate. Tap the power button to switch on the air fryer; the LED display will show ‘ON'.

Preset Functions

To use a preset cooking function, first press ‘1' or '2' to select the cooking compartment, then press one of the function buttons. The display will cycle between preset time and temperature. Adjust time and temperature using the `+/-` buttons. Press `START` to begin heating. Time and temperature can be changed during use. Press `STOP` to pause, `START` to resume. Cooking will automatically switch off when complete. To switch off the air fryer, press and hold the power button.

Manual Function

Set time and temperature manually by pressing ‘MANUAL', then adjust with `+/-` buttons. Press `START` to begin heating. Time and temperature can be changed during use.

Cooking Functions

Using the Sync Cook Setting

Use the sync setting when cooking different foods in each compartment to ensure both finish at the same time.

1. STEP 1: Tap '1' and set required settings for the first compartment.
2. STEP 2: Repeat for the second compartment by tapping '2'.
3. STEP 3: Press `SYNC`; the button will illuminate.
4. STEP 4: Press `START` to begin cooking.

Using the Match Cook Setting

Use the match setting when cooking the same foods in both compartments to ensure they finish at the same time.

1. STEP 1: Tap '1' and '2' then set the required settings for the second cooking compartment.
2. STEP 2: Press `MATCH`; the button will illuminate.
3. STEP 3: Press `START` to begin cooking.

Using the Air Fryer (General Operation)

1. STEP 1: Plug in and switch on at the mains power supply. The air fryer will beep and the power button will illuminate.
2. STEP 2: Tap the power button to switch on the air fryer; the LED display will show ‘ON'.
3. STEP 3: Use the digital control panel to set cooking time and temperature using the `+/-` buttons.
4. STEP 4: Remove the cooking compartments by pulling them out using the handles. Place them onto a flat, stable, heat-resistant surface.
5. STEP 5: Place ingredients into the non-stick coated cooking trays, then slide the compartments back into the air fryer main unit.
6. STEP 6: Set cooking time and temperature as required, or use function buttons which cycle through presets. Adjust with `+/-` buttons.
7. STEP 7: Some ingredients may require shaking halfway through cooking. Remove compartments, shake gently, then slide back to continue cooking.
8. STEP 8: Once cooking is complete, the air fryer will beep and switch off. Check readiness; if not cooked, close compartments and adjust time. If cooked, empty contents into a bowl or onto a plate, using heat-resistant tongs if needed.

Storage

Check that the air fryer is cool, clean, and dry before storing in a cool, dry place. Never wrap the cord tightly around the air fryer; wrap it loosely to avoid causing damage.

Specifications

• Product code: EK6178
• Input: 220-240 V ~ 50/60 Hz
• Output: 2400 W

Disposal Information

The symbol on the product, its batteries, or packaging indicates that this product and its batteries must not be disposed of with household waste. It is the user's responsibility to hand this over to an applicable collection point for the recycling of batteries and electrical and electronic equipment. This separate collection and recycling helps conserve natural resources and prevent negative environmental and health consequences.

Some retailers offer take-back services for exhausted equipment. Users are responsible for deleting any personal data on electrical and electronic equipment before disposal.

For more information on disposal, contact local authorities, household waste disposal services, or retailers.

Manufactured by:

Ultimate Products UK Ltd., Victoria Street, Manchester OL9 ODD. UK.
Ultimate Products Europe Ltd., 19 Baggot Street Lower, Dublin D02 X658. ROI.

MADE IN CHINA.