Zircon StudSensor™ Pro SL

Product Overview

The Zircon StudSensor™ Pro SL is a deep-scanning stud finder designed to quickly and easily locate the edges of wood and metal studs and joists behind walls, floors, and ceilings. It features the patented SpotLite® Pointing System, which projects a beam of light onto the wall to clearly identify the target location.

Key Features

• ZStud Scan Mode: Locates stud edges up to 3/4 inch (19 mm) deep.
• DeepScan® Mode: Doubles scanning depth to 1 1/2 inches (38 mm).
• SpotLite® Pointing System: Uses a beam of light to indicate the target edge.
• LED Indicators: Red LEDs signal approaching stud edges, and a green LED indicates when the stud edge is reached.
• Audio Alert: Provides an audible notification for detected stud edges.
• "Over-the-stud" Indicator: Alerts users if scanning begins directly over a stud.
• TruCal® Technology: Automatically calibrates to wall density for accurate readings.

Specifications

Dimensions:

5.54 in. H x 2.33 in. W x 1.18 in. D (141 mm x 59 mm x 30 mm)

Weight:

3.6 oz. (102 g) without battery

Battery Type:

9-V alkaline (not included)

Estimated Battery Life:

1 year at 10 minutes per day with alkaline battery

Position Accuracy*:

Up to 3/4 in. (19 mm) depth: typically within 1/8 in. (3 mm); Up to 1 1/2 in. (38 mm) depth: typically within 3/16 in. (5 mm)

Depth*:

Stud Scan: up to 3/4 in. (19 mm); DeepScan®: up to 1 1/2 in. (38 mm)

Operating Temperature:

20° to 120°F (-7° to 49°C)

Storage Temperature:

-20° to 150°F (-29° to 66°C)

Humidity:

80% RH (noncondensing)

Water Resistance:

Splash and water resistant, not waterproof

*Note: Sensing depth and accuracy can vary due to moisture, material content, wall texture, and paint.