FSP100-P35-B19 Technical Specification

Physical Layout and Dimensions

This document details the physical dimensions and pin assignments for the FSP100-P35-B19 electronic component. The drawing depicts a rectangular component with various features and connection points.

Overall Dimensions:

• Length: 127.00 ± 0.5 mm
• Width: 115.80 ± 0.5 mm

Key Features and Locations:

• A space designated for a "MAIN LABEL" is present on the component's surface.
• Connector "IN1" is indicated.
• Connector "CN200" is indicated.
• There are four mounting holes, each with a diameter of 4.0 mm (indicated as $4.0(4X)$).
• Several circular pads or terminals are shown, including one marked with a '+' symbol, potentially indicating a positive terminal.

Additional Dimensions:

• Dimension 1: 76.20 ± 0.5 mm
• Dimension 2: 64.80 ± 0.5 mm
• Dimension 3: 5.60 mm
• Dimension 4: 3.00 mm (Maximum)
• Dimension 5: 26.00 mm (Maximum)
• Dimension 6: 1.60 mm

The drawing includes a "[Third Angle Projection Symbol]" indicating the projection method used.

Dimensional Tolerances

The following general tolerances are specified:

Specific tolerances for holes and angles are:

• Holes: ±0.2
• Angles: ±0.5°

Other specified tolerances include:

• Up to 100: ±0.2
• >30 to 100: ±0.35
• 100 to 150: ±0.25
• >100 to 300: ±0.5
• 150 to 200: ±0.3
• Above 300: ±0.5
• 200 to 250: ±0.35
• 250 to 300: ±0.4
• 300 to 350: ±0.45
• Up to 100: ±1.0
• 100 to 600: ±1.5
• 600 to 900: ±2.4
• 900 and over: ±3.1

Pin Assignments

Pin Assignment for IN1

Pin Assignment for CN200

Notes

Note: Origin label to be affixed as per sales instructions.

File Path Reference: Z:\autocad\MODEL-NAME\100W\FSP100-P35-B19\90C1007300.dwg