MAXSISUN PB Pro Series User Manual
Remote Control LED Grow Light
Safety Information
Warnings and Recommendations
- Do NOT use a damaged power cord.
- Do NOT look directly at the LED bulbs when the light is operating.
- Do NOT use the light near flammable, explosive or reactive substances.
- Do NOT attempt to open, rewire or reconfigure any components of the light system. It will void the warranty and could cause severe injury or death.
- Hang light securely so that it cannot fall.
- Only use the supplied power cord comes with the light.
- Indoor use only. The light is certified for use in damp and dry locations.
- Always disconnect power from the light before moving or cleaning it.
- Check and adhere to all local rules and regulations when installing.
- The minimum required distances between lights is 4 inches (10cm), and between the light and combustible materials is 16 inches (40cm) such as walls, ceilings, movable partitions, and the like.
- The maximum temperature of the installed environment that will ensure safe operation of the light. A mechanical ventilation or cooling system is required to maintain the temperature within the growing space below 104°F (or 40°C) when the light is operating.
Cleaning
Disconnect the power cord. Using a clean, soft, lint-free cloth to wipe the light. Please be aware of getting moisture or damage in any openings.
Legal Disclaimer
MAXSISUN products are to be used for lawful purposes only. It is the responsibility of the purchaser to know and abide by all laws on the use of MAXSISUN products. MAXSISUN will NOT be held liable for any unlawful state or federal activity arising out of the use of our products. By purchasing a MAXSISUN product, you agree to these terms and conditions, confirming that you, as the purchaser, are attesting to the lawful use of our product and are thereby solely responsible for acting in conformance with all applicable regulations.
Quick Start Guide
1. Before Use
- Install batteries in the remote.
- Plug the light into an outlet. Turn off its switch.
2. Connect Remote to Light(s)
Image showing the remote control with buttons like ON, OFF, BRIGHTNESS (10% to 100%), and ALL. Instructions for turning the light on and off (standby mode).
Steps for connecting the remote to lights:
- Press [1]. Select the brightness for group 1.
- Press [2]. Select the brightness for group 2.
- Press [ALL]. Select the brightness for all lights.
Tips: To save your electricity bill, please turn off the switch of the light if not in use for a long time.
3. Grouping: Set Different Brightness for Multiple Lights
Instructions for grouping lights. For example, connecting one remote to multiple lights (e.g., 10 lights) and then grouping them into different channels (e.g., 5 lights in group 1, 5 in group 2).
Steps:
- Turn off its switch.
- Long-press [1] and turn on 5 lights' switches. The lights will blink if the connection succeeds.
- Put the rest of 5 lights into group 2: Long-press [2] and turn on their switches. The lights will blink if the connection succeeds.
4. Change One Light to Other Group
Steps to change a light's group assignment:
- Long-press [ID] and turn on the switch. The light will blink if the connection succeeds.
- Press [ALL]. Select the brightness you want. Repeat for all lights.
5. Connect Remote to Light Which is in Standby Mode
Steps:
- Turn off the switch over 15 seconds.
- Long-press [ID] and turn on the switch over 5 seconds. The connection will succeed.
- Press [ON] to turn on the light.
Product Specifications and Usage
Image showing the MAXSISUN logo, the PB Pro Series title, and the different models of LED grow lights (PB1000 Pro, PB1500 Pro, PB2000 Pro, PB4000 Pro) with their associated drivers and remote controls.
PB1000 Pro
Specifications
| Model | PB1000 Pro | HID Replacement | 200W HPS/MH |
|---|---|---|---|
| Feature | Remote Control | Vegetative Coverage at 18" | 2.5 × 2.5 ft |
| Actual Power Draw | 100W±3% at 120V | Flowering Coverage at 14" | 2 × 2 ft |
| LED Quantities | 350pcs | Use for | all stages grow and flowering |
| Total Harmonic Distortion | <15% | Dimensions | 12 x 10.8 x 2.1 inches |
| Input | AC100-240V~ 0.95A | Item Weight | 3.9 lbs |
| Frequency | 50-60Hz | Lifespan | ≥100,000 hours |
| Package Includes | 1 x PB1000 Pro; 2 x Hanging Kits; 2 x Rope Hangers; 1 x 6 ft Power Cord; 1 × Remote (with 2pcs AAA batteries) | ||
Using Suggestions
| PB1000 Pro | Height (above plants' canopy) | Using Hours | Brightness |
|---|---|---|---|
| 3-5 Days Acclimation Period | 24"-28" | 18 on / 6 off | 40% |
| Seedlings/Young Vegetative | 20"-24" | 18 on / 6 off | 60% |
| Vegetative Stage | 16"-20" | 18 on / 6 off | 100% |
| Flowering Stage | 12"-16" | 12 on / 12 off | 100% |
PPFD Map - Tested in a 2x2 ft Grow Tent
PB1000 Pro PPFD Map at Height 12": A grid of values (µmol/m²/s) showing light intensity distribution: [354, 484, 522, 462, 367], [515, 724, 873, 738, 541], [595, 867, 1085, 884, 625], [540, 782, 884, 797, 585], [407, 530, 599, 588, 480].
PB1000 Pro PPFD Map at Height 18": A grid of values (µmol/m²/s) showing light intensity distribution: [444, 474, 484, 472, 449], [470, 511, 547, 521, 488], [511, 557, 632, 560, 526], [478, 526, 554, 538, 513], [455, 478, 494, 479, 450].
Spectrum
PB1000 Pro Spectrum: A graph showing light intensity across wavelengths from 380nm to 800nm, with peaks in the blue and red regions, indicating a full-spectrum output.
❗ NOTE: Extremely bright, do not stare at operating lamp. For flowering stage: use all channels with 100% brightness. This light includes IR (Infrared) LEDs which look dim, they are not faulty LEDs. For safety, total true wattage of extra connected lights MUST less than 600W.
Image showing the PB1000 Pro unit with its driver (XLG-100-H-AB) and remote control.
PB1500 Pro
Specifications
| Model | PB1500 Pro | HID Replacement | 300W HPS/MH |
|---|---|---|---|
| Feature | Remote Control | Vegetative Coverage at 20" | 3 × 3 ft |
| Actual Power Draw | 150W±3% at 120V | Flowering Coverage at 16" | 2.5 × 2.5 ft |
| LED Quantities | 490pcs | Use for | all stages grow and flowering |
| Total Harmonic Distortion | <15% | Dimensions | 16 x 10.8 x 2.4 inches |
| Input | AC100-240V~ 1.42A | Item Weight | 6.3 lbs |
| Frequency | 50-60Hz | Lifespan | ≥100,000 hours |
| Package Includes | 1 x PB1500 Pro; 2 x Hanging Kits; 2 x Rope Hangers; 1 x 6 ft Power Cord; 1 × Remote (with 2pcs AAA batteries) | ||
Using Suggestions
| PB1500 Pro | Height (above plants' canopy) | Using Hours | Brightness |
|---|---|---|---|
| 3-5 Days Acclimation Period | 26"-30" | 18 on / 6 off | 40% |
| Seedlings/Young Vegetative | 22"-26" | 18 on / 6 off | 60% |
| Vegetative Stage | 18"-22" | 18 on / 6 off | 100% |
| Flowering Stage | 14"-18" | 12 on /12 off | 100% |
PPFD Map - Tested in a 2x2 ft Grow Tent
PB1500 Pro PPFD Map at Height 12": A grid of values (µmol/m²/s) showing light intensity distribution: [610, 755, 807, 725, 601], [854, 1071, 1149, 1037, 837], [930, 1198, 1313, 1190, 925], [791, 1022, 1097, 1005, 829], [570, 680, 747, 707, 638].
PB1500 Pro PPFD Map at Height 18": A grid of values (µmol/m²/s) showing light intensity distribution: [620, 643, 655, 615, 565], [665, 709, 725, 687, 654], [698, 739, 744, 710, 672], [633, 679, 692, 663, 644], [535, 566, 570, 569, 560].
Spectrum
PB1500 Pro Spectrum: A graph showing light intensity across wavelengths from 380nm to 800nm, with peaks in the blue and red regions, indicating a full-spectrum output.
❗ NOTE: Extremely bright, do not stare at operating lamp. For flowering stage: use all channels with 100% brightness. This light includes IR (Infrared) LEDs which look dim, they are not faulty LEDs. For safety, total true wattage of extra connected lights MUST less than 600W.
Image showing the PB1500 Pro unit with its driver (XLG-150-H-AB) and remote control.
PB2000 Pro
Specifications
| Model | PB2000 Pro | HID Replacement | 400W HPS/MH |
|---|---|---|---|
| Feature | Remote Control | Vegetative Coverage at 22" | 4 x 3.5 ft |
| Actual Power Draw | 200W±3% at 120V | Flowering Coverage at 18" | 3.5 × 3 ft |
| LED Quantities | 700pcs | Use for | all stages grow and flowering |
| Total Harmonic Distortion | <15% | Dimensions | 24 x 10.8 x 2.4 inches |
| Input | AC100-240V~ 1.9A | Item Weight | 8.9 lbs |
| Frequency | 50-60Hz | Lifespan | ≥100,000 hours |
| Package Includes | 1 x PB2000 Pro; 2 x Hanging Kits; 2 x Rope Hangers; 1 x 6 ft Power Cord; 1 × Remote (with 2pcs AAA batteries) | ||
Using Suggestions
| PB2000 Pro | Height (above plants' canopy) | Using Hours | Brightness |
|---|---|---|---|
| 3-5 Days Acclimation Period | 28"-32" | 18 on / 6 off | 40% |
| Seedlings/Young Vegetative | 24"-28" | 18 on /6 off | 60% |
| Vegetative Stage | 20"-24" | 18 on / 6 off | 100% |
| Flowering Stage | 16"-20" | 12 on/12 off | 100% |
PPFD Map - Tested in a 4x2 ft Grow Tent
PB2000 Pro PPFD Map at Height 12": A grid of values (µmol/m²/s) showing light intensity distribution: [360, 523, 697, 760, 786, 771, 674, 492, 335], [450, 732, 995, 1105, 1138, 1105, 978, 690, 430], [513, 842, 1150, 1557, 1676, 1548, 1117, 790, 475], [450, 733, 985, 1107, 1120, 1095, 958, 695, 440], [324, 497, 658, 756, 773, 740, 659, 508, 359].
PB2000 Pro PPFD Map at Height 18": A grid of values (µmol/m²/s) showing light intensity distribution: [449, 553, 660, 778, 795, 772, 669, 557, 457], [465, 599, 709, 869, 895, 863, 698, 587, 461], [482, 620, 801, 914, 996, 909, 733, 605, 482], [452, 576, 691, 845, 877, 844, 672, 563, 458], [444, 555, 649, 766, 787, 770, 614, 535, 449].
Spectrum
PB2000 Pro Spectrum: A graph showing light intensity across wavelengths from 380nm to 800nm, with peaks in the blue and red regions, indicating a full-spectrum output.
❗ NOTE: Extremely bright, do not stare at operating lamp. For flowering stage: use all channels with 100% brightness. This light includes IR (Infrared) LEDs which look dim, they are not faulty LEDs. For safety, total true wattage of extra connected lights MUST less than 600W.
Image showing the PB2000 Pro unit with its driver (XLG-240-H-AB) and remote control.
PB4000 Pro
Specifications
| Model | PB4000 Pro | HID Replacement | 800W HPS/MH |
|---|---|---|---|
| Feature | Remote Control | Vegetative Coverage at 28" | 5 × 5 ft |
| Actual Power Draw | 400W±3% at 120V | Flowering Coverage at 24" | 4 x 4 ft |
| LED Quantities | 1400pcs | Use for | all stages grow and flowering |
| Total Harmonic Distortion | <15% | Dimensions | 24 x 21.6 x 2.4 inches |
| Input | AC100-240V~ 3.8A | Item Weight | 17.5 lbs |
| Frequency | 50-60Hz | Lifespan | ≥100,000 hours |
| Package Includes | 1 x PB4000 Pro; 2 x Hanging Kits; 2 x Rope Hangers; 1 x 6 ft Power Cord; 1 × Remote (with 2pcs AAA batteries) | ||
Using Suggestions
| PB4000 Pro | Height (above plants' canopy) | Using Hours | Brightness |
|---|---|---|---|
| 3-5 Days Acclimation Period | 34"-38" | 18 on / 6 off | 40% |
| Seedlings/Young Vegetative | 30"-34" | 18 on / 6 off | 60% |
| Vegetative Stage | 26"-30" | 18 on / 6 off | 100% |
| Flowering Stage | 22"-26" | 12 on /12 off | 100% |
PPFD Map - Tested in a 4x4 ft Grow Tent
PB4000 Pro PPFD Map at Height 12": A grid of values (µmol/m²/s) showing light intensity distribution: [240, 327, 419, 488, 488, 473, 417, 337, 241], [372, 590, 862, 988, 950, 965, 887, 614, 377], [527, 964, 1465, 1630, 1677, 1715, 1543, 1029, 557], [633, 1205, 1825, 2121, 2151, 2205, 1981, 1297, 662], [693, 1320, 1943, 2212, 2561, 2284, 2041, 1345, 680], [664, 1221, 1914, 2200, 2229, 2284, 2011, 1329, 668], [626, 1155, 1663, 1868, 1910, 1951, 1735, 1145, 556], [397, 669, 970, 1114, 1178, 1131, 1075, 737, 382], [257, 371, 350, 564, 607, 584, 527, 384, 248].
PB4000 Pro PPFD Map at Height 18": A grid of values (µmol/m²/s) showing light intensity distribution: [405, 471, 548, 604, 616, 608, 560, 495, 421], [490, 597, 707, 780, 810, 792, 733, 615, 494], [573, 720, 870, 965, 1106, 982, 892, 753, 590], [632, 806, 1094, 1417, 1460, 1434, 1121, 833, 645], [655, 835, 1243, 1477, 1612, 1489, 1266, 875, 666], [633, 810, 1102, 1442, 1472, 1450, 1119, 832, 653], [581, 744, 902, 1108, 1135, 1108, 909, 762, 585], [486, 608, 725, 801, 825, 811, 738, 626, 505], [420, 485, 558, 606, 640, 631, 580, 490, 425].
Spectrum
PB4000 Pro Spectrum: A graph showing light intensity across wavelengths from 380nm to 800nm, with peaks in the blue and red regions, indicating a full-spectrum output.
❗ NOTE: Extremely bright, do not stare at operating lamp. For flowering stage: use all channels with 100% brightness. This light includes IR (Infrared) LEDs which look dim, they are not faulty LEDs. For safety, total true wattage of extra connected lights MUST less than 600W.
Image showing the PB4000 Pro unit with its driver (XLG-240-H-AB) and remote control.
Mounting Instructions
- Attach the clips on the ends of the hanging wires to each of the hanging holes on the light.
- Attach two adjustable ropes, via the carabiners, to each of the hanging wires' carabiners.
- Attach opposite ends of adjustable ropes' hangers to a safety mounting position.
- Adjust the light to your desired location by using the adjustable ropes.
Image illustrating the mounting process.
Warranty Information
180 days full warranty | 3 years limited warranty
What Is Covered
MAXSISUN lights are warranted against defects in materials and craft for three (3) years from the original date of purchase. During the warranty period, MAXSISUN will either repair or replace any covered defective product. Within the first 180 days, MAXSISUN will bear all costs associated with the repair, replacement, and return of the faulty product. After 180 days, the customer will assume responsibility for shipping the defective product back to MAXSISUN for the remainder of the warranty period. MAXSISUN will, in turn, assume liability for up to $50.00 per light of the shipping fees associated with returning the repaired or replaced product to the purchaser. Return shipping fees above $50.00 will be the responsibility of the purchaser.
What Is Not Covered
- This warranty does not cover any damage, deterioration, malfunction resulting from any alteration, modification, improper or unreasonable use or maintenance, misuse, abuse, neglect, exposure to excess moisture, fire, lightning, power surges, or other acts of nature.
- This warranty does not cover any damage, deterioration, malfunction resulting from the installation, removal, unauthorized tampering, repairs attempted by anyone unauthorized by MAXSISUN to make such repairs. Any other cause which does not relate directly to a defect in materials and quality of this product is not covered.
90 Days Money Back Guarantee
MAXSISUN is so confident in the performance of our cutting edge lights that we offer a full 90 days money-back guarantee. If you are unsatisfied with your purchase for any reason, we will gladly accept a return and provide a refund less shipping fees.
Eligibility requirements are as follows:
- Valid for the first purchase of MAXSISUN products only.
- Valid for the original purchaser only.
- Valid for up to two lights.
- 90 days begins from the date of purchase.
- The returned products must be in "like new" condition and in original packaging.
Offer valid for returns only. Exchanges are subject to a 30 days return policy and restocking fee. Offer valid for direct purchasers only. Customers purchasing via authorized resellers are subject to policies of the reseller.
Returns
Returns not qualifying for the 90 Days Money Back Guarantee can still be returned within 30 days from the date of purchase. Pending the below conditions are met, the purchaser will receive a refund:
- 30 days begins from date of purchase.
- Valid for the original purchaser only.
- The product must be in "like new" condition and in original packaging.
How To Obtain Warranty Service
To enforce the rights under this warranty, the purchaser must notify MAXSISUN of a warranty claim by sending an email to support@maxsisun.com. At this time, the purchaser will be called upon to provide proof of purchase. The MAXSISUN representative will either attempt to assist in trouble-shooting, request photos showing the defect, and provide more detailed return instructions. Upon receipt and review of the defective product, MAXSISUN will repair or replace, and return within five (5) business days. To obtain refund service, upon receipt and review of the returned product, MAXSISUN will issue return credit within three (3) business days.