Work Light SL-F261 - User Manual
CE UK CA ♻️ ?️
Made in China
Product Specifications
| Product | Work Light |
|---|---|
| Model | SL-F261 |
| Battery | Rechargeable Battery |
| Mode | 100% - 50% - SOS - FLASH |
| LED Type | COB |
| Power Display | 4 LED (100% - 75% - 50% - 25%) |
| Waterproof | IP65 |
| Charging Method | Type-C Port With Type-C Cable |
Ports and Connectivity
Description: The rear of the work light features a USB A port and a Type-C port.
USB A Port & Type-C Port
- Input: Type-C Port Charging, Fast charge.
- Output: 5V1A Output. Can be used as a backup mobile power supply to charge other devices in an emergency.
Charging Indicators
Description: The work light uses 4 blue LED lights to indicate battery status.
Charging Port: 4 Blue LED Light Indicators
- Charging: Blue Light Flash
- Full Charge: 4 Blue Lights always on
Note: To avoid battery usage errors, the light may not illuminate immediately when the button is pressed for the first time. You can check the battery level simultaneously.
Features
Bottom Strong Magnet
Description: The work light includes a strong magnet on its base.
The included magnet can be firmly attached to metal surfaces, allowing you to free your hands during tasks such as car repairs, circuit inspections, and more.
Product Maintenance
- To charge the work light, please use a standard mobile phone charger or a 5V mobile power supply. Using a non-standard charger may harm the battery's service life and may even cause a safety hazard.
- Once charging is completed, please unplug the charging power to avoid overcharging the battery.
- During charging, keep the work light away from any flammable items to prevent accidents.
- The product is IP65 waterproof and can withstand rain or water splashes, but do not soak or submerge it in water.
- To prevent battery over-discharge, turn off the light when the brightness weakens significantly.
- Quickly turn off the light by clicking the switch after staying in any gear for 8 seconds.
Warm Tips & Safety Precautions
- Looking directly at the LED lights can be dangerous. Please do not dispose of waste electrical products and batteries in household waste. Do not attempt to modify the battery in this product. Keep it away from open flames and out of reach of children.
- When the light becomes very hot during prolonged use, please turn it off. When the temperature falls, you can turn the switch back on.
- The manufacturer will not be responsible for any damage caused by man-made modification or abnormal use of this equipment, such as explosion or short circuit.
