WLR2000 Work Light: Operation and Safety Guide

Important Safety Information

CAUTION: DO NOT TOUCH LENS WHEN LIGHT IS ON.

General Cautions:

CAUTION: Risk of fire,explosion and burns. Do not disassemble, crush, heat above 100°C/212°F or incinerate. Improper use of this work light can result in injury. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Failure to observe the following safety rules may result in FIRE, ELECTRICAL SHOCK, OR INJURY. Do not look directly into the light. Only use chargers with 5V DC, up to 2.4A.

WARNING: THESE LED LIGHTS ARE EXTREMELY BRIGHT. NEVER POINT TOWARD YOUR EYES OR PEOPLE AROUND YOU. DO NOT POINT AT MOVING VEHICLES OR AIRCRAFT.

Chinese Safety Information:

告誡: 開燈時請勿觸摸鏡頭。

注意力: 有起火,爆炸和灼傷的危險。請勿拆卸,壓碎,加熱超過 100°C / 212°F或焚化。不當使用此工作燈可能會導致受傷。未經負責合規方的明確許可,未經許可擅自對本機進行更改或修改,可能會導致用戶喪失操作設備的權利。不遵守以下安全規則可能會導致火災,電擊或傷害。不要直視光線。僅使用5V DC(最大2.4A)的充電器。

警告: 這些LED燈非常亮。切勿直視您的眼睛或周圍的人。請勿指向正在行駛的車輛或飛機。

Product Features and Operation

This section describes the components and how to operate the WLR2000 work light.

Key Components:

• HEAVY DUTY MAGNET (重型磁鐵): A strong magnetic base for secure mounting to metal surfaces.
• POWER / BRIGHTNESS (功率/亮度): Press the button to cycle through different brightness levels.
• HANDLE LOCKING NUT (手柄螺母): A nut used to secure the adjustable handle in place.
• CHARGING INPUT (充電輸入): The port where the device is connected for charging.
• USB OUTPUT (USB輸出): A USB port that can be used to charge external devices.
• BATTERY INDICATOR (電池指示燈): An indicator light that shows the current battery status.

Operating Instructions:

• PUSH POWER BUTTON TO CHANGE BRIGHTNESS.
• FOR LONGEST OPERATING TIME, USE ON LOWEST BRIGHTNESS.
• OPERATES AT REDUCED BRIGHTNESS WHEN PLUGGED IN.
• TURN OFF LIGHT TO CHARGE.

Chinese Operating Instructions:

• 告誡:開燈時請勿觸摸鏡頭。
• 按電源按鈕以更改亮度。
• 為了延長操作時間,請在最低亮度下使用。
• 插入電源時亮度降低。
• 關燈充電。

Technical Specifications

Operating Temperature:

• Charge: 32°F to 113°F (0°C to 45°C)
• Discharge: -4°F to 113°F (-20°C to 45°C)

工作溫度:

• 充電:0℃至45°C (32°F至113°F)
• 放電:-4°F至113°F (-20°C至45°C)