Duravit Vero Toilet Seat and Cover with SoftClose
Installation Instructions
Product Information
Brand: Duravit
Model: Vero
Features: SoftClose
Part Number: #0069390000
Mounting Instructions
This section provides instructions for mounting the Duravit Vero toilet seat and cover with SoftClose functionality.
Step 1: Prepare the Toilet Bowl
Ensure the toilet bowl is clean and ready for installation. Identify the mounting holes on the toilet bowl.
Step 2: Attach Mounting Hardware
Diagram 1: Shows the various components of the mounting hardware, including screws, washers, and nuts.
Diagram 2: Illustrates attaching the mounting bolts (1) through the toilet bowl holes from underneath, securing them with washers (2) and nuts (3).
Step 3: Position the Toilet Seat Hinges
Diagram 3: Shows the toilet seat hinges being placed onto the mounting bolts.
Diagram 4: Demonstrates aligning the hinges with the bolts and tightening them using the provided tool or a screwdriver.
Step 4: Adjust and Secure the Seat
Diagram 5: Illustrates adjusting the position of the toilet seat on the hinges for optimal alignment with the toilet bowl. Arrows indicate the adjustment range.
Diagram 6: Shows the final tightening of the hinge screws to secure the seat in its adjusted position.
Step 5: Final Check
Diagram 7: Depicts the toilet seat correctly installed on the bowl.
Diagram 8: Shows the SoftClose mechanism engaging as the seat is lowered.
Diagram 9: A close-up view of the fully installed toilet seat and cover.
Note: Technical and optical improvements may be made to the products shown.
Contact Information:
Duravit AG
Werderstr. 36
78132 Hornberg
Germany
Phone: +49 78 33 70 0
Fax: +49 78 33 70 289
Email: info@duravit.de
Website: www.duravit.de