Xiaomi 15T Safety Information
This document provides essential safety information and regulatory compliance details for the Xiaomi 15T smartphone.
Product Overview
The Xiaomi 15T is a mobile phone supporting GSM, GPRS, EDGE, UMTS, LTE, 5G NR, Bluetooth, and Wi-Fi technologies.
To view the full user guide, please scan the QR code provided with the device or visit the manufacturer's website.
[Note: The original document included a diagram of the phone, SIM tray, and a QR code. The QR code is excluded as per instructions.]
European Union (EU) Regulations
Declaration of Conformity RED
Xiaomi Communications Co., Ltd. hereby declares that this mobile phone complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at: www.mi.com/en/certification.
RF Exposure (SAR) Information (EU)
This device complies with the Specific Absorption Rate (SAR) limits for the general population or uncontrolled exposure (maximum permissible SAR value for 10 grams of tissue when worn on the body and close to the head: 2.0 W/kg), as defined by the Council Recommendation 1999/519/EC, recommendations of the International Commission on Non-Ionizing Radiation Protection, and Directive 2014/53/EU (RED).
During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions that simulate RF exposure during use close to the head and at a distance of 5 mm from the body. Compliance with SAR requirements for body-worn operation is confirmed at a distance of 5 mm between the device and the human body. The device should be carried at least 5 mm away from the body to ensure RF exposure levels comply with or are below the permissible limits. When attaching the device to the body, use a belt clip or holster that does not contain metal components and allows for a 5 mm distance between the device and the body. Verification and certification of compliance with RF exposure requirements when the device is worn on the body with metal-containing accessories have not been carried out, so the use of such accessories should be avoided.
Highest SAR Values (EU):
- Head SAR: 0.99 W/kg
- Body SAR (at 5 mm): 0.99 W/kg
Frequency Bands and Power (EU)
This mobile phone supports the following frequency bands in the EU with the maximum radio frequency power:
- GSM 900: 35.5 dBm
- GSM 1800: 32.5 dBm
- WCDMA band 1/8: 25.7 dBm
- LTE band 1/3/7/8/20/28/38/40/41: 25.7 dBm, LTE band 42: 26 dBm
- 5G NR n1/n3/n7/n8/n20/n28/n38/n40: 26 dBm; 5G NR n41/n77/n78: 29 dBm
- Bluetooth: 20 dBm
- Wi-Fi 2.4 GHz: 20 dBm
- Wi-Fi 5 GHz: 5150–5250 MHz: 23 dBm; 5250–5350 MHz: 23 dBm; 5470–5725 MHz: 23 dBm; 5725-5850 MHz: 14 dBm; 5945–6425 MHz: 23 dBm
- NFC: 13.56 MHz < 42 dBuA/m at 10m
Note: 5G connectivity depends on the country, operator, and user's operating conditions.
Ecodesign Information
Product information can be found at: https://www.mi.com/global/support/ecodesign-energy.
Federal Communications Commission (FCC) Regulations
FCC Compliance
This mobile phone complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This phone has been tested and found to comply with the limits for a Class B digital device, as per Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations.
This equipment generates, uses, and can radiate radio frequency energy. If not installed or used according to instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure (SAR) Information (FCC)
This device meets government requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The standard for exposure to wireless devices uses a unit of measurement known as the Specific Absorption Rate (SAR).
The SAR limit set by the FCC is 1.6 W/kg. This device has been tested for safe body-worn operation. Testing has shown that the device complies with FCC RF exposure guidelines when used with an accessory that does not contain metal and positions the device at least 0.5 cm from the body. Compliance with RF exposure requirements for body-worn accessories containing metal components has not been verified or certified, so their use should be avoided. Any accessories used for operating the device while worn on the body must ensure a distance of at least 0.5 cm between the device and the body.
FCC Note
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. To comply with FCC limits for Class B devices, shielded cables must be used with this equipment. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control or communication.
Ukraine Compliance
Technical Regulations
In accordance with the Technical Regulation on Radio Equipment, approved by the Resolution of the Cabinet of Ministers of Ukraine dated May 24, 2017, No. 355, Xiaomi Communications Co., Ltd. declares that the radio equipment type: Radiotelephone (Mobile Phone) trademark "Xiaomi" model 25069PTEBG (Xiaomi 15T) complies with the Technical Regulation on Radio Equipment.
The full text of the declaration of conformity is available at: www.mi.com/en/certification.
Frequency Bands and Power (Ukraine)
This mobile phone supports the following frequency bands in Ukraine with maximum radio frequency power:
- GSM 900: 33 dBm, ± 2 dBm tolerance (EN301511)
- GSM 1800: 30 dBm, ± 2 dBm tolerance (EN301511)
- WCDMA band 1/8: 24 dBm, +1.7/-3.7 dBm tolerance (EN301908-2)
- LTE band 1/3/7/8/20/28/38/40: 23 dBm, ± 2.7 dBm tolerance (EN301908-13)
- Bluetooth: 20 dBm
- Wi-Fi 2.4 GHz: 20 dBm
- Wi-Fi 5.1-5.7 GHz: 20 dBm
- Wi-Fi 5.7-5.8 GHz: 14 dBm
- NFC 13.56 MHz: 42 dBuA/m at 10m
Electronic Label
This device features an electronic label with certification information. To access it, navigate to Settings > About phone > Certification, or search for "Certification" in Settings.
Reset Instructions
Path: Settings > About phone > Reset. This function allows you to quickly erase local data on the device, including accounts, contacts, photos, videos, applications, backups, SD card data, and other objects.
Model Information
Model: 25069PTEBG. The marking 2506 indicates that this product will be released after June 2025.
Safety Precautions
- Observe all applicable laws and regulations that restrict the use of mobile phones in certain situations or environments.
- Do not use the phone in potentially explosive environments, such as near gas stations, in enclosed spaces on ships, in fuel or chemical storage facilities, or in vehicles transporting them. Also, avoid areas where the air may be saturated with chemicals or fine particles like sand, dust, or metal powders. Adhere to all posted signs requiring wireless devices, such as your phone or other radio equipment, to be turned off. Turn off your mobile phone or wireless device in explosive areas or where required to turn off two-way radio devices or electronic devices to prevent potential hazards.
- Do not use the phone in hospital operating rooms, emergency rooms, or intensive care units. Always comply with the rules and regulations of hospitals and medical centers. If you have a medical device, consult your doctor and the device manufacturer to determine if the phone may interfere with its operation. To avoid potential interference with a pacemaker, always keep the mobile phone at least 15 cm away from it. Hold the phone to the ear on the opposite side from the pacemaker and do not carry it in a breast pocket. To avoid interfering with medical equipment, do not use the phone near hearing aids, cochlear implants, or similar devices.
- Observe all air travel safety regulations and turn off your phone on board an aircraft when required.
- When driving a vehicle, use the phone in accordance with applicable traffic laws and regulations.
- To avoid electric shock from lightning, do not use the phone outdoors during a thunderstorm.
- Do not use the phone for calls while it is charging.
- Do not use the phone in high-humidity locations, such as bathrooms. This could lead to electric shock, injury, fire, or damage to the charger.
Environmental Protection
For environmental protection, the package does not include a power adapter. You can use most USB power adapters and a USB Type-C cable to power this device.
Charging
To charge the device:
- Connect the Xiaomi 15T to a computer using a USB data cable.
- Use the USB cable included in the box with a "Mi" brand charger and connect it to a power outlet.
The product supports charging with a maximum output power of 67W (Xiaomi HyperCharge).
Charging Compatibility
You can also use a third-party charger that complies with USB 2.0 standards or higher, and meets the requirements of the International Standard for Safety of Information Technology Equipment (IEC 60950), the Standard for Audio/Video, Information and Communication Technology Equipment (IEC 62368-1), and applicable laws and regulations in your country or region. Using other chargers that do not meet the specified requirements may damage the product or cause personal or material safety harm.
Power Adapter Information
The power supplied by the charger should be within a minimum of [10] W, required for the radio equipment, up to a maximum of [50] W for achieving maximum charging speed (USB PD Fast Charging).
Legal Information
This device can be operated in all EU countries. Please observe national and local regulations applicable in the territories where the device is used.
This device is prohibited for indoor use only if it operates in the frequency bands from 5250 to 5350 MHz, and from 5945 to 6425 MHz in the following countries: AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE, UK(NI), IS, LI, NO, CH, TR.
Wi-Fi connectivity (including Wi-Fi frequency bands, Wi-Fi standards, and other functions approved by the IEEE 802.11 standard) may vary depending on the region and support for local networks. This function may be added wirelessly (OTA) when and where needed.
2.4 GHz Band Restriction
Norway: This provision does not apply to the geographical territory within a 20 km radius of the center of Ny-Ålesund.
Ensure that the power adapters used comply with the applicable national and international safety standards.