Xiaomi Mi Note 10 Pro User Manual

Welcome to Mi Note 10 Pro

Thank you for choosing the Mi Note 10 Pro. To turn on the device, press and hold the power button. Follow the on-screen instructions to set up your device. For more information, visit our official website: www.mi.com/global/service/userguide

MIUI Operating System

The Mi Note 10 Pro comes with the pre-installed MIUI OS, our customizable Android-based operating system. It features frequent updates and convenient functions, developed with input from over 200 million active users worldwide. Find more details at en.miui.com.

Hardware Overview

The device features a touchscreen display. Key physical components include:

• Volume Buttons: Located on the side of the device for adjusting audio levels.
• Power Button: Also located on the side, used for turning the device on/off and locking/unlocking the screen.
• USB Type-C Port: Located at the bottom, used for charging and data transfer.

The screen displays the time (e.g., 02:48) and date (e.g., Sat, Aug 16).

SIM Card Tray and Dual SIM Support

The device uses Nano-SIM cards. The SIM card tray typically accommodates two Nano-SIM cards.

Dual SIM Card Support:

• 4G dual SIM card support depends on local mobile network operator standards and may not be available in all regions.
• The device supports the use of two Nano-SIM cards. When using two SIM card slots, either SIM can be selected as the primary SIM.
• VoLTE is supported by carriers only in certain regions.
• The system automatically updates to optimize network performance. Check your device's system version for more details.

Safety Information and Disposal

Waste Electrical and Electronic Equipment

Special precautions are required for the safe disposal of this product. The symbol indicates that this product should not be disposed of with other household waste within the EU. To prevent harm to the environment and human health from improper waste disposal, and to promote the reuse of material resources, dispose of the device responsibly. Return used devices to electronics collection points or the retail store where they were originally purchased for safe recycling. For the environmental declaration, visit: www.mi.com/en/about/environment.

Battery Safety

⚠️ ATTENTION! Using the wrong type of battery can result in explosion. Dispose of used batteries according to instructions.

• The product contains a Class 1 laser.
• To avoid hearing damage, do not listen to sound at high volume for extended periods.
• Additional safety and precaution information is available at: www.mi.com/en/certification

Important Safety Information

Read all safety information before using the device.

• Using third-party cables, power adapters, or batteries may cause fire, explosion, or other hazardous situations. Use only authorized accessories compatible with your device.
• The operating temperature range for the device is 0°C to 40°C. Using the phone outside this range may damage the device.
• If the device has a built-in battery, do not attempt to replace it yourself, to avoid damaging the battery or the device.
• Charge the device only with the provided or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage to the device and adapter.
• After charging, disconnect the adapter from the device and unplug it from the outlet. Do not charge the device for more than 12 hours.
• Batteries must be recycled or disposed of separately from household waste. Improper handling of a battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories in accordance with local laws.
• Do not disassemble, break, crush, or incinerate the battery. If the battery appears deformed or damaged, stop using it immediately.
• Do not short-circuit the battery, as this may cause overheating, burns, or other injuries.
• Do not leave the battery in high ambient temperatures; overheating may cause explosion.
• Do not disassemble, break, or crush the battery, as this may cause electrolyte leakage, overheating, or explosion.
• Do not incinerate the battery, as this may cause fire or explosion.
• If you find the battery is deformed or damaged, stop using it immediately.
• Users are prohibited from removing or modifying the battery. Battery removal or repair must be performed only by an authorized service center.
• Do not wet the device.
• Do not attempt to repair the device yourself. If any component is not functioning properly, contact Mi customer support or an authorized service center.
• Connect other devices according to operating instructions. Do not connect incompatible devices.
• When using AC adapters, ensure the socket-outlet is near the equipment and easily accessible.

Precautions

Familiarize yourself with applicable laws and regulations that restrict mobile phone use in certain situations and locations.

• Do not use the phone at refueling stations, in potentially explosive atmospheres (e.g., fuel-loading areas, enclosed spaces on ships, fuel or chemical storage areas, transport vehicles), or where air may be contaminated with chemicals, sand, dust, or metal powders. Observe all posted signs prohibiting wireless device use.
• Turn off the mobile phone or wireless device in areas where blasting operations are taking place, or where signs prohibit the use of two-way radios or electronic devices to avoid potential interference.
• Do not use the mobile phone in hospital operating rooms, emergency rooms, or intensive care units. Follow all hospital rules and regulations. If you use a personal medical device, consult your doctor and the device manufacturer to determine if the phone will interfere. To avoid potential interference with a pacemaker, maintain a minimum distance of 15 cm between the pacemaker and the mobile phone. Hold the phone to the ear opposite the pacemaker's location and do not carry it in your chest pocket. To avoid interference with other medical equipment (e.g., hearing aids, cochlear implants), do not use the phone near them.
• Observe aircraft safety regulations and turn off the phone if necessary.
• While driving, use the phone in accordance with applicable traffic laws and regulations.
• To avoid lightning strikes, do not use the phone outdoors during thunderstorms.
• Do not use the phone for calls while it is charging.
• Do not use the phone in high humidity areas, such as bathrooms, as this may lead to electric shock, injury, fire, or damage to the charger.

Regulatory Information

Safety Statement

Update the phone's operating system using the built-in software update feature or at authorized service centers. Updating software through other means may damage the device or lead to data loss, security issues, and other risks.

EU Declaration of Conformity

Xiaomi Communications Co., Ltd. (China) declares that this digital mobile phone M1910F4S, supporting GSM/GPRS/EDGE/UMTS/LTE and Bluetooth/Wi-Fi, complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full EU declaration of conformity is available at: www.mi.com/en/certification.

Radio Frequency (RF) Exposure Information (SAR)

This device complies with Specific Absorption Rate (SAR) requirements for public/uncontrolled exposure (SAR limit for head and body is 2.0 W/kg averaged over 10 g of tissue). These requirements are based on Council Recommendation 1999/519/EC, guidelines from the International Commission on Non-Ionizing Radiation Protection, and Directive 2014/53/EU (RED).

During SAR compliance testing, the device transmitted at its highest certified power level in all tested frequency bands. It was tested in positions simulating RF exposure when worn close to the head and at a distance of 5 mm from the body. SAR values were measured with the device operating at a distance of 5 mm from the human body. It is recommended to use the device at least 5 mm from the body to ensure acceptable RF exposure levels. For wearing the device close to the body, use belt clips or holsters without metal parts that ensure a minimum 5 mm distance. Compliance with RF exposure regulations for body-worn accessories containing metal elements has not been tested and certified, so wearing such accessories is not recommended.

Certification Information (SAR Limits):

• SAR limit for 10 g: 2.0 W/kg.
• Head SAR: 1.107 W/kg.
• Body SAR: 1.392 W/kg (at 5 mm distance).

Legal Information: This device may be used in all EU member states. Comply with national and local regulations when using the device.

Frequency Bands and Power

This device is intended for indoor use only in the 5150–5350 MHz frequency band in the following countries:

AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE, UK.

Receiver Category: 2

The power adapter used must comply with clause 2.5 of IEC60950-1/EN60950-1 and clause 6.4.5 of IEC/EN 62368-1, and be tested/approved according to national or regional standards.

This mobile phone operates in the following frequency bands within the EU at maximum RF power:

• GSM 900: 35 dBm
• GSM 1800: 32 dBm
• UMTS 1/8: 25 dBm
• LTE 1/3/7/8/20/28/38/40: 25.7 dBm
• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz: 20 dBm
• Wi-Fi 5 GHz: 5150–5250 MHz (20 dBm), 5250–5350 MHz (20 dBm), 5470–5725 MHz (20 dBm), 5725–5825 MHz (14 dBm)
• NFC: 13.56 MHz < -19.19 dBm/m at 10 m

Federal Communications Commission (FCC) Regulations

This mobile phone complies with Part 15 of the FCC Rules. Operation is subject to two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These requirements provide reasonable protection against harmful interference in residential installations.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. If interference occurs with radio or television reception (determined by turning the equipment off and on), users are encouraged to try the following:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that of the receiver.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Electronic Label

This device has an electronic label with certification information. To view it, go to "Settings" > "About phone" > "Certification" or search for "Certification" in Settings.

Model: M1910F4S

The marking "1910" indicates the product was released after October 2019.

Manufacturer Information and Disclaimer

This user manual is published by Xiaomi or its local affiliated company. Xiaomi may make changes or corrections to this manual due to typographical errors, inaccuracies, or software/hardware improvements at any time without notice. Such changes will be incorporated into new editions. All illustrations are for reference purposes only and may not precisely represent the actual device.

This smartphone is designed with Corning® Gorilla® Glass 5.

Manufacturer: Xiaomi Communications Co., Ltd. (China)

Manufacturer's Postal Address: Rainbow City of China Resources, No. 68, Qinghe Middle Street, Haidian District, Beijing, China, 100085

Brand: XIAOMI

Model: M1910F4S

Xiaomi Inc. All rights reserved.

Certification Mark: EAC