TVÄLLEN

Step 1: Prepare Cabinet and Basin

Diagram: A person is shown holding a silicone sealant gun, indicating its use for application.

Diagram: Shows assembly of cabinet parts using tools like a hammer. Another sequence depicts a person consulting instructions, assembling parts, and then making a phone call with an IKEA building visible, suggesting seeking assistance.

Diagram: Illustrates a wall plug with the part number 10051572, labeled '1x'.

Diagram: A close-up view of hands assembling a wall mounting bracket, showing screws and a tool being used.

1. Apply silicone sealant to the top edges of the cabinet where the wash-basin will rest. Ensure even application.

2. Carefully place the TVÄLLEN wash-basin onto the cabinet, aligning it correctly.

Step 2: Secure Wash-basin to Wall

Diagram: Shows measurements for positioning the basin on the cabinet (e.g., 280 mm width) and the distance from the top edge (55 mm). An 'x mm' measurement indicates the distance from the wall.

Diagram: Illustrates inserting wall plugs (2x) into a wall. A close-up shows a plug being inserted to a depth of 15mm (1/2"). An incorrect screw type is shown crossed out.

3. Measure and mark the wall for mounting points, referencing the basin's dimensions. Use a spirit level to ensure the basin will be installed level.

4. Insert appropriate wall plugs (2x) into the wall at the marked positions. Ensure they are fully seated.

Diagram: Shows the wash-basin being hung onto wall brackets. Close-up views detail how the basin's mounting holes align with the brackets and how a wrench is used to tighten a securing mechanism.

5. Mount the wash-basin onto the wall brackets. Secure the basin by tightening the fastening mechanisms using a wrench.

Step 3: Final Sealing and Curing

Diagram: A clock face indicates a waiting period (e.g., 1-3 hours) before proceeding. A crossed-out wet seal is shown next to an arrow pointing to a dry seal, signifying the need to wait for the silicone to cure.

Diagram: Shows applying a final bead of silicone sealant around the edges where the basin meets the wall or cabinet to create a watertight seal.

6. Allow the silicone sealant to cure according to the manufacturer's instructions (indicated by a clock showing time passing). Ensure a watertight seal is achieved.

Step 4: Wall Mounting Details

Diagram: Shows two wall mounting plates (124140) and two cylindrical sleeves (124139), labeled '2x' each.

7. Attach the wall mounting plates to the wall using appropriate screws and wall plugs (not included). Ensure they are securely fastened.

8. Hang the wash-basin onto the mounted plates. Adjust and tighten as necessary for a secure fit.