Zimi Powermesh Fan Controller with Light Switch

1. Important - Read before installing.

DIY Warning: Must only be installed by a LICENSED ELECTRICIAN to local wiring regulations. Failure to follow these instructions can result in serious injury or death.

Safety Warning: This is a semiconductor switching device. The mains power MUST BE SWITCHED OFF before performing any wiring or maintenance work.

Installation Steps:

• Once the product has been fastened to the wall, remove the screw caps and insert firmly into the screw mounting holes.

Factory Reset: Remove the cover and press the RESET button until the Powermesh indicator flashes blue. Release the button and when the indicator turns blue, it's ready to pair.

2. Using the Fan Controller.

• Light Switch: Touch for on/off.
• MAC ID: Unique product serial number.
• Powermesh Status Indicator: See overleaf for the meaning of each colour status.
• Reset Button: Press to reset.
• Fan Speed: Touch for on/off. Slide to change speeds.
• Triple tap for Speed Sense: To sync fan speed with temperature.
• Snap on cover

3. Connect the wiring.

Safety Warning: Surge protection is recommended at the main switchboard. Products damaged by power surges are not covered by warranty.

Specifications

Wiring Diagram:

ACTIVE (connected to mains power supply)

NEUTRAL (connected to mains power supply)

LOAD (connected to fan motor)

LIGHT (connected to light fixture)

4. Pair and setup with Zimi.

• Download the Zimi App.
• Choose 'Add Device'.
• Follow the on-screen instructions.

Zimi App Download: Point your phone camera at the QR code to open the app store.

Download on the App Store

GET IT ON Google Play

5. Zimi Cloud Connect.

Enjoy the full experience with all your Powermesh devices.

Requires Wi-Fi with Internet connection.

• Works with Hey Google
• Works with Alexa
• Remote access anywhere
• Voice control hands free
• Energy history over time

6. Want to learn more or need help?

Enjoy all the features to make your life easier. Visit our website for tips, tricks and help.

support.zimi.life

Features:

• Speed Sense: Sync fan speed with temperature.
• Schedules: Turn it on and off any day or time.
• Energy Use: Monitor the power usage and cost.
• Auto off Timer: Turn it off automatically.

7. Powermesh Status Indicator.

Manufacturer's Warranty

This product is warranted to the original purchaser and is not transferable. The product is guaranteed to be free from defects in workmanship and parts for a period of 1 Year from the date of purchase. Defects that occur within this warranty period, under normal use and care will be repaired, replaced or refunded. GSM Innovations Pty Ltd shall not be responsible for damage of any kind, caused by accidents, power surges, electrical storm damage, incorrect power current, infestation (vermin or insect), incorrect installation, improper use of controls or failure to use the unit in accordance with the operating instructions, general misuse or abuse or from normal wear and tear. Any attempt by an unauthorised person to repair or tamper with the equipment shall render the warranty null and void.

Proof of Purchase: Please keep your purchase docket or receipt as proof of purchase and as proof of the date on which the purchase was made. The purchase docket or receipt must be presented with the warranty when making a claim under this warranty.

Service during the warranty period: The first point of contact for product issues is the place of purchase. The product must be returned to the original place of purchase for product repair, replacement or refund. In the event of goods requiring repair under manufacturer's warranty the owner is responsible for the cost of transportation.

This warranty is given by GSM Innovations Pty Ltd, 14 Millennium Circuit, Helensvale, QLD 4212, Australia.

Safety Warnings

Read all instructions and safety information. All electrical work must only be undertaken after disconnection of the power by removing fuses or turning off the circuit breaker, to ensure all pole disconnection from the electrical supply. All electrical work must be carried out by a licensed and qualified electrician and in accordance to AS/NZS 3000 Wiring Rules and applicable local authority regulations. This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Young children should be supervised to ensure that they do not play with the unit. Do not cut or notch joists, beams and rafters to install the unit. Do not damage hidden electrical wiring or utilities when cutting. The product must be installed so that switches and other controls cannot be touched by a person in the bath or shower. Do not install the product in a location where water will splash onto it. Check and confirm that all connections are proper and secure to prevent causing property damages or injury. Do not install outdoor where it could be exposed to water or moisture (indoor use only).

Trademarks

Zimi and Powermesh and their respective logos are registered trademarks of GSM Innovations Pty Ltd. Google and Google Play are trademarks of Google LLC. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. Apple, the Apple logo, Apple Watch and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.

Copyright © 2021 GSM Innovations Pty Ltd. All rights reserved.

Zimi
14 Millennium Circuit
Helensvale QLD 4212
Australia.
www.zimi.life

powermesh