Logitech Tap IP Setup Guide

What's in the Box

The package contains the Logitech Tap IP Touch Controller.

The following documentation is also included:

• EN Documentation
• FR Documentation
• DE Bedienungsanleitung
• IT Documentazione
• ES Documentación
• NL Documentatie
• SV Dokumentation
• DA Brugervejledning
• NO Dokumentasjon
• FI Dokumentaatio
• EL Εγχειρίδια
• RU Документация
• PL Dokumentacja produktu
• HU Útmutató
• CS Dokumentace
• SK Dokumentácia
• UK Документація
• ET Dokumentatsioon
• LV Dokumentācija
• LT Dokumentacija
• BG Документация
• HR Dokumentacija
• SR Dokumentacija
• SL Dokumentacija
• RO Documentație
• TR Belgeler
• العربية الوثائق
• עברית תיעוד מוצר
• PT Documentação
• 繁體中文 文件
• 한국어 사용 설명서
• ID Dokumentasi

Features

The Logitech Tap IP features the following:

1. 10.1-inch Touch Screen
2. Bottom cover with thumbscrew
3. Speaker
4. VESA MIS-D 100 x 100mm mounting
5. Motion sensor
6. Factory restore pinhole
7. Device reset button

Before You Begin

To set up your Logitech Tap IP, you will need:

• Meeting Room System Credentials / activation code
• Ethernet Cable(s)
• PoE enabled network OR PoE Injector and network (Ethernet or WiFi)

Setup

To set up your Tap IP, follow the on-screen prompts.

Connect to a PoE enabled network or PoE Injector (not included).

Factory Reset

To perform a factory reset:

1. Press and hold the pinhole button (A) for 5 seconds.
2. Press the reset button (B).
3. Release the reset button (B).
4. Release the pinhole button (A).

For more information, visit www.logitech.com/support/tapip