Mother's Choice

Please Read this manual in its entirety before assembling the product and follow all instructions contained herein.

Do not use if any part is Broken, Torn or Missing. Please retain instruction manual for future reference.

Illustrations are representative only. Design and style may vary.

A photograph of the Mother's Choice Coco Folding Bassinette, showing its wooden frame, white fabric body, and canopy.

⚠️ WARNINGS

Failure to follow these warnings and instructions could result in serious injury or death.

These instructions detail the safe use, assembly and maintenance of your product. Please read these instructions carefully and ensure that they are followed at all times.

• ⬆️ FALL HAZARD - To help prevent falls, do not use this product when the infant begins to push up on hands and knees or has reached the manufacturer's recommended maximum weight, whichever comes first.
• ⬆️ SUFFOCATION HAZARD - Infants can suffocate:
  • In gaps between an extra pad and the side of the bassinet/cradle.
  • On soft bedding. NEVER add a mattress, pillow, comforter, or padding.
  • Use ONLY the pad provided by manufacturer.
• Do not leave children unattended.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.
• Never allow young children to play unsupervised in the vicinity of the bassinette.
• Only use the mattress supplied with this bassinette. Never use an extra mattress as this may cause a child to become trapped in the gap between the extra mattress, and the side of the bassinette, and suffocate.
• Do not leave anything in the bassinette such as toys that provide a foothold to enable the child to climb out.
• Keep medication and small items that a child could choke on away from the bassinette.
• Do not use the bassinette near naked heat sources, bar heaters, open fires or exposed flames.
• Keep the bassinette clear of trailing cables or hanging cords and place away from curtains and blinds.
• Do not try to move the bassinette while the child is in it.
• This product is not intended for commercial use.
• Use only those accessories supplied by IGC Dorel and approved for use with this bassinette.
• To avoid danger of suffocation, keep any plastic bags away from babies and children. Plastic bags can block nose and mouth and prevent breathing. Bags are not toys. Please dispose of waste packaging thoughtfully.
• Discontinue use of this bassinette if the padded rim has been holed or bitten through.
• Before placing your child in the bassinette, ensure that the cot has been correctly assembled and that all locking devices are fully engaged.
• Strings can cause strangulation! Do not place items with string around a child's neck, such as hood strings or pacifier cords. Do not suspend strings over the bassinette or cradle or attach strings to toys.
• The weight of the child shall not exceed 9kg.

This Instruction Manual applies to Model: #12470, #12471 and #12472.

Component list:

Assembling your Bassinette

Remove all contents from carton and check that all components listed are present.

Assembly is considerably easier with two people.

Each leg assembly comes pre assembled.

To join each leg: With the arrow on the (THIS WAY UP) sticker pointing UP, position the large hole of the brace over the locking screw on the remaining leg. Slide the screw head to the extreme Right then Up to lock the brace into position, as per Figure 1.

The brace has to be visibly locked while in use.

Figure 1 shows the process of joining leg assemblies. It depicts a brace with a 'THIS WAY UP' sticker, a locking screw, and a hinge bolt head. Arrows indicate sliding the screw head to the right and then up to lock. A close-up view confirms the brace must be visibly locked. A second image shows two assembled leg frames with the locking screw facing outwards.

Repeat for other leg assembly noting that the locking screw is always facing out, as per Figure 2.

Using the 4 A bolts, 4 barrel nuts and Allen key provided, loosely connect two rails to the lower position of the leg assembly, as per Figure 2.

Figure 2 illustrates the connection of lower rails to the leg assembly using A bolts and barrel nuts. A close-up view details how the barrel nut fits into a slot and aligns with the bolt.

Insert the two remaining (top) rails into the bassinette bag, as per Figure 3.

Figure 3 shows two top rails being inserted into the fabric bassinette bag.

As per Figure 4, attach one end of each of the two top rails by:

1. Inserting a barrel nut in each hole as shown.
2. Screwing 2 A bolts on each side of the legs as shown.

Figure 4 demonstrates attaching the top rails to the legs. It shows inserting barrel nuts into holes and then screwing A bolts to secure them. Close-up views highlight the alignment of the barrel nut slot with the bolt.

As per Figure 5, attach the two veil support members to the outside of the set of legs by:

1. Inserting 2 barrel nuts in the top rails.
2. Screwing 2 bolts C into the unattached ends of the top rails using an Allen key.

Once the bolts have been fitted, rotate the rails so that the slots go underneath and are not visible.

Attach the veil support rail using one bolt B.

Figure 5 illustrates attaching the veil support members to the legs and top rails using C bolts and barrel nuts. It also shows the attachment of the veil support rail with a B bolt. Close-up views detail the connection points.

Slide the rear of the veil support tube over the front of the veil support rail, as per Figure 6.

Figure 6 shows the veil support tube being slid onto the veil support rail.

Slide all of the veil support tube onto the veil support rail and secure the front of the tube to the Velcro® on the front of the rail, as per Figure 7.

Figure 7 shows the veil support tube fully attached to the rail and secured with Velcro.

Ensure that the opening in the top rear corner of the veil is positioned, as per Figure 8.

Figure 8 indicates the correct positioning of the opening in the veil.

Place the base board and mattress in the bassinette bag. The bassinette is now ready for use.

TO FOLD THE BASSINETTE

Lift the end of both metal braces until the screw is in the wider part of the keyhole then unhook, as per Figure 9 Step 1.

Push the two top rails together, as per Figure 9 Step 2.

Figure 9 illustrates the folding process. Step 1 shows unhooking the metal braces by lifting them to the wider part of the keyhole. Step 2 shows pushing the top rails together.

Notes

Product care and maintenance

• Always store indoors in a clean dry place.
• Do not use abrasives or detergent on surfaces.
• Scuff marks can be removed with mild soap and warm water. Dry with soft towel.
• Regularly check all screws and fittings to ensure that they are tight.
• Damaged components should be replaced as required.
• Replacement parts are available from the IGC Dorel Customer Service.

Customer service

Please contact our Customer Service Department if you experience a problem with this product or require assistance:

Specifications are subject to change without notice.

Copy or reproduction without permission is prohibited.

© 2011 IGC Dorel Pty Ltd. All Rights Reserved. www.igcdorel.com.au