Dyson Airblade 1B Installation

This document provides installation drawings and guidance for the Dyson Airblade 1B. The visual representation '1A + 1B = ?' suggests a successful assembly or operation.

The term "Installation drawings" is provided in multiple languages, including English, Icelandic, Italian, Spanish, Czech, German, Danish, Norwegian, Swedish, Finnish, French, Greek, Hungarian, Croatian, Indonesian, Dutch, Polish, Portuguese, Romanian, Russian, Serbian, Thai, Turkish, Arabic, and Hebrew.

Figure A: Installation Positioning

This section illustrates correct and incorrect positioning for installation:

• Diagram 1: Shows correct placement of pipework relative to the wall and mounting point. Marked with a checkmark (✔️).
• Diagram 2: Depicts proper clearance and alignment for installation. Marked with a checkmark (✔️).
• Diagram 3: Illustrates correct wall-mounted installation with appropriate spacing. Marked with a checkmark (✔️).
• Diagram 4: Shows an incorrect installation, likely due to misaligned or improperly spaced pipework. Marked with a cross (❌).

The Dyson logo is present.

Figure B: Top View

A top-down view of the Dyson Airblade unit is shown.

Figure 1: Mounting Dimensions and Template

This figure details the required dimensions for mounting the Dyson Airblade and provides a mounting template.

Key dimensions for installation clearances are:

• 1451mm
• 1416mm
• 1256mm
• 1207mm
• 1179mm
• 1079mm

The diagram indicates recommended heights and clearances for different user groups:

• Adults (various heights indicated)
• Wheelchair users (indicated by a wheelchair symbol ♿)
• Children (age ranges provided: 11-14 years, 8-11 years, 5-8 years)

The term "Floor" is indicated.

Important: Refer to "Wall fixing requirements" in the Installation manual.

Figure 2: Wall Mounting and Wiring Preparation

This stage involves preparing the wall for mounting:

• Drilling holes into the wall as per the template.
• Securing a mounting bracket or backplate to the wall using eight (x8) screws. Checkmarks (✔️) indicate correct procedure, while a cross (❌) indicates an incorrect one.

Figure 3: Unit Attachment and Wiring

This figure details the electrical connections and initial unit attachment:

• Connecting the electrical supply wires (typically live, neutral, and earth) to the designated terminals within the unit or bracket.
• Securing the main Dyson Airblade unit to the wall bracket.

Figure 4: Securing the Unit

This step focuses on firmly attaching the main unit:

• The unit is positioned and moved upwards (indicated by arrows ⬆️) to engage with the mounting bracket.
• The unit is secured, likely with two (x2) screws.

Figure 5: Final Assembly and Power On

The final steps involve completing the installation:

• Attaching the outer casing or cover. A "clik" sound is indicated, signifying a secure fit.
• The unit is powered on, indicated by an "ON" status.

Product Information

Model Numbers: JN.101800, PN.295434-01-02, JN.101786, PN.287600-01-02

Date: 26.07.19