GULLABERG 8-Drawer Dresser

Important Safety Information

WARNING! Children have died from furniture tipover. To reduce the risk of furniture tipover:

• ALWAYS install the anti-tip device provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• DO NOT defeat or remove the drawer interlock system; it is an important stability and safety system.
• Place heaviest items in the lowest drawers.
• Read and follow each step of the instruction carefully.

AVERTISSEMENT! Des enfants sont morts suite au basculement d'un meuble. Afin de limiter le risque de basculement d'un meuble :

• TOUJOURS utiliser le système anti-basculement fourni.
• NE JAMAIS installer de TV sur ce produit.
• NE JAMAIS laisser d'enfants se tenir debout sur quelque tiroir, porte ou étagère que ce soit, y grimper ou s'y suspendre.
• NE JAMAIS ouvrir plus d'un tiroir à la fois.
• NE PAS mettre hors d'état de fonctionnement ou ne pas retirer le système de blocage individuel des tiroirs; il constitue un important élément de stabilité et de sécurité.
• Placer les choses les plus lourdes dans les tiroirs du bas.
• Lire et suivre attentivement toutes les étapes de la notice de montage.

ADVERTENCIA: Han muerto niños por el vuelco de muebles. Para limitar el riesgo de vuelco de los muebles:

• Instala SIEMPRE el dispositivo antivuelco que se suministra.
• No pongas NUNCA un televisor encima de este producto.
• No permitas NUNCA que los niños se pongan de pie, trepen o se cuelguen de los cajones, puertas o baldas.
• No abras NUNCA más de un cajón a la vez.
• NO desconectes ni quites el sistema de bloqueo de los cajones; se trata de un sistema importante de seguridad y estabilidad.
• Mete los objetos más pesados en los cajones inferiores.
• Lee y sigue cada paso de las instrucciones cuidadosamente.

Tools and Parts Overview

Tools required: Screwdrivers (Phillips and flathead), hammer, pencil, level, drill with various drill bits (Ø 5/16" (8 mm), Ø 1/8" (3 mm)).

Parts included: Various screws, dowels, cam locks, drawer slides, handles, and an anti-tip kit.

Assembly Steps

Step 1: Attach drawer slides to the side panels using screws (10108520) and cam locks (146114). Ensure correct orientation of slides (IKEA CR and IKEA CL).

Diagram shows attaching drawer slides to side panels with screws and cam locks.

Step 2: Assemble the base frame using screws (100347) and dowels (10122691, 10119567).

Diagram shows assembling the base frame with screws and dowels.

Step 3: Attach the back panels to the frame using screws (146114).

Diagram shows attaching back panels with screws.

Step 4: Insert cam lock screws (100347) into the designated holes.

Diagram shows inserting cam lock screws.

Step 5: Attach the drawer runners to the side panels using screws (100347) and cam locks (10122691, 10119567).

Diagram shows attaching drawer runners with screws and cam locks.

Step 6: Attach the top panel to the assembled frame using screws (144575) and brackets (102553).

Diagram shows attaching the top panel with screws and brackets.

Step 7: Attach the side supports using dowels (102553) and screws (144574).

Diagram shows attaching side supports with dowels and screws.

Step 8: Attach the back support using screws (144574) and brackets (102553).

Diagram shows attaching the back support with screws and brackets.

Step 9: Insert the main connecting bolts (100223) and secure with cam locks (100229).

Diagram shows inserting connecting bolts and securing with cam locks.

Step 10: Slide the back panels into place and secure them.

Diagram shows sliding back panels into place.

Step 11: Attach the side panels to the main frame.

Diagram shows attaching side panels to the frame.

Step 12: Secure the side panels with cam locks and screws.

Diagram shows securing side panels with cam locks and screws.

Step 13: Insert the drawer support rails and secure with screws (100347) and cam locks (158473).

Diagram shows inserting drawer support rails and securing them.

Step 14: Attach the drawer runners to the drawer sides using screws (10122710, 10122693).

Diagram shows attaching drawer runners to drawer sides.

Step 15: Slide the drawer bottoms into the grooves and secure them.

Diagram shows sliding drawer bottoms into grooves.

Step 16: Attach the drawer fronts to the drawer boxes using screws (146114) and cam locks (10108520).

Diagram shows attaching drawer fronts to drawer boxes.

Step 17: Attach the drawer slides to the drawer sides using screws (146114) and dowels (100347).

Diagram shows attaching drawer slides to drawer sides.

Step 18: Assemble the drawer sides and back panel.

Diagram shows assembling drawer sides and back panel.

Step 19: Insert the drawer dividers.

Diagram shows inserting drawer dividers.

Step 20: Attach the drawer handles using screws (100006) and dowels (100229).

Diagram shows attaching drawer handles.

Step 21: Slide the drawer bottom into the assembled drawer box.

Diagram shows sliding drawer bottom into the drawer box.

Step 22: Attach the drawer fronts to the drawer boxes using screws (151706, 151708) and cam locks (151705, 151707).

Diagram shows attaching drawer fronts to drawer boxes.

Step 23: Secure the drawer boxes with screws (194970).

Diagram shows securing drawer boxes with screws.

Step 24: Attach the drawer fronts to the main dresser frame using the provided connectors (10093081, 10093082).

Diagram shows attaching drawer fronts to the dresser frame.

Step 25: Secure the drawer fronts with screws (109049).

Diagram shows securing drawer fronts with screws.

Step 26: Insert the assembled drawers into the dresser frame.

Diagram shows inserting drawers into the dresser.

Step 27: Attach the drawer runners to the dresser frame using screws (100001) and cam locks (100217).

Diagram shows attaching drawer runners to the dresser frame.

Step 28: Attach the drawer fronts to the dresser frame using connectors (10093081, 10093082).

Diagram shows attaching drawer fronts to the dresser frame.

Step 29: Adjust the leveling feet if necessary.

Diagram shows adjusting leveling feet.

Step 30: Attach the anti-tip hardware to the dresser and the wall.

Diagram shows attaching anti-tip hardware.

Step 31: Final check of all connections.

Diagram shows a final check of the assembled dresser.

Step 32: Wall Mounting Instructions

The supplied screws and plugs can be used with most solid (A) and hollow (B) walls. For solid wood (C), use the screws without plugs. If uncertain, seek professional advice.

Diagram A shows wall plug insertion for solid walls. Diagram B shows wall plug insertion for hollow walls. Diagram C shows screw insertion for solid wood.

Step 33: Attach the anti-tip bracket to the dresser using screws (10102070).

Diagram shows attaching anti-tip bracket to the dresser.

Step 34: Secure the dresser to the wall using the anti-tip hardware.

Diagram shows securing the dresser to the wall.

Step 35: Assemble the drawer boxes.

Diagram shows assembling drawer boxes.

Step 36: Attach the base of the dresser.

Diagram shows attaching the base of the dresser.

Step 37: Assemble the drawer sides and back panel.

Diagram shows assembling drawer sides and back panel.

Step 38: Attach the drawer runners to the drawer sides.

Diagram shows attaching drawer runners to drawer sides.

Step 39: Attach the drawer handles.

Diagram shows attaching drawer handles.

Step 40: Attach the drawer slides to the dresser frame.

Diagram shows attaching drawer slides to the dresser frame.

Step 41: Insert the drawer fronts into the drawer boxes.

Diagram shows inserting drawer fronts into drawer boxes.

Step 42: Insert the assembled drawers into the dresser.

Diagram shows inserting drawers into the dresser.

Step 43: Final placement of drawers.

Diagram shows final placement of drawers.

Step 44: Final placement of drawers.

Diagram shows final placement of drawers.

Care and Maintenance

Wipe clean with a damp cloth. Wipe dry with a clean cloth.