EverStart Maxx PPS1CWE 1000 Amp Battery Jump-Starter with Wireless Charging

Product Overview

The EverStart Maxx PPS1CWE is a versatile 1000 Amp battery jump-starter that also functions as an air compressor and a wireless charger. It is designed for automotive and general use, providing power and convenience.

Features

The unit includes the following components:

• 1. Carry Handle: For easy portability.
• 2. Wireless Charging Pad: Integrated pad for charging compatible devices.
• 3. LED Area Light: Provides illumination.
• 4. LCD Screen: Displays battery status, voltage, pressure, and other operational information.
• 5. LED Light Power Button: Controls the LED Area Light.
• 6. Decrease Compressor Pressure Control Button (-): Adjusts compressor pressure downwards.
• 7. Boost Cables: Heavy-duty cables with clamps for jump-starting.
• 8. Alternator Check Button: Initiates an alternator diagnostic test.
• 9. Compressor Power Button: Activates the air compressor.
• 10. Wireless Charging Button: Activates the wireless charging feature.
• 11. USB Power Button: Activates the USB power ports.
• 12. Increase Compressor Pressure Control Button (+): Adjusts compressor pressure upwards.
• 13. USB Ports (with USB Power/Fault Indicators): Two USB ports for charging devices, each with an indicator light.
• 14. AC Charging Port: Port for connecting the AC adapter to recharge the unit.
• 15. Air Hose and Sure Fit® Nozzle: Hose with a universal nozzle for tire inflation.
• 16. Boost Cables Connector: Connects the boost cables to the main unit.
• 17. Clamp Connection Slot: Slot on the unit where the boost cables connector is inserted.
• 18. Air Hose and Sure Fit® Nozzle in Hose Storage Groove: Integrated storage for the air hose and nozzle.
• 19. Nozzle Adapter: Adapter for inflating items without standard valve stems.
• 20. AC Charging Adapter: Power adapter for recharging the unit.

LCD Display Detail

The LCD screen provides various indicators:

• Battery Status Icon: Displays the charge level of the internal battery using bars (full to empty).
• Voltage Indicator: Shows the current battery voltage.
• Digital Display: Shows specific readings like PSI for the compressor or other function-related data.
• Clamp Icons: Indicate the status of the connected battery clamps.
• Alarm Icon: Signals an error or fault condition.
• Reverse Polarity Icons: Flash when the battery clamps are connected with incorrect polarity.
• Alternator Icon: Appears during the alternator check process.
• USB Icon: Indicates that the USB ports are active.
• Compressor Icon: Illuminates when the air compressor is in use.
• Wireless Charging Indicator: Flashes when the wireless charging function is active.
• Fault Icon: Indicates a general fault or error.

Safety Guidelines and Definitions

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury and/or property damage.

Risk of Unsafe Operation: Always follow basic safety precautions. Do not modify the product or use it for unintended applications.

WARNING: Read and understand this manual before use. Failure to follow instructions may result in electric shock, fire, or serious injury.

General Safety Warnings and Instructions

• This unit is designed for household use only.
• Avoid dangerous environments (damp, wet, rain).
• Keep children away from the work area.
• Dress properly: avoid loose clothing or jewelry. Use rubber gloves and non-skid footwear when working outdoors.
• Store idle appliances indoors in a dry, locked-up place, out of reach of children.
• Do not abuse the cord; keep it away from heat, oil, and sharp edges.
• Disconnect the appliance from the power supply when not in use, before servicing, or when changing accessories.
• Use Ground Fault Circuit Interrupter (GFCI) protection on circuits or outlets.
• Use only recommended accessories.
• Stay alert and use common sense. Do not operate when tired or impaired.
• Check for damaged parts and contact the manufacturer for replacements. Do not use if the switch does not operate correctly.
• Do not operate near flammable liquids or in explosive atmospheres. Motors spark and may ignite fumes.
• Never submerge the unit in water; do not expose it to rain, snow, or use when wet.
• Disconnect from power source before maintenance or cleaning.
• This equipment produces arcs or sparks; place it at least 18 inches above the floor in garages or enclosed areas.

Specific Safety Instructions for Charging This Unit

• IMPORTANT: Charge the unit for a full 20 hours before first use.
• Use only the supplied AC charger.
• Ensure all power switches are OFF when charging or not in use.

Extension Cords

WARNING: Use of improper extension cords can lead to fire and electric shock. Ensure the cord is heavy enough for the product's current draw and has the correct pin configuration. Use the following table for guidance:

CAUTION: Pull extension cords by the plug, not the cord, when disconnecting.

Specific Safety Instructions for Wireless Charging

CAUTION: Do not use the Jump-Starter or Compressor while using the Wireless Charging function. Place the appliance in the center of the Wireless Charging Pad.

Specific Safety Instructions for Jump Starters

WARNING: Do not use for charging dry-cell batteries; use only for lead-acid batteries. Do not supply power to low-voltage systems other than starter-motor applications.

WARNING: Risk of explosive gases. Batteries generate explosive gases. Follow all instructions and cautionary markings.

CAUTION: NEVER attempt to jump-start or charge a frozen battery.

• Vehicles with computerized systems may be damaged; consult your vehicle's manual.
• Ensure immediate assistance is available when working with lead-acid batteries.
• Never smoke or allow sparks/flames near batteries or engines.
• Stay clear of moving parts like fan blades and belts.
• Remove metal jewelry (rings, watches) as batteries can produce high short-circuit currents.
• Do not wear vinyl clothing; friction can cause static sparks.
• Be careful not to drop metal tools onto the battery.
• Perform jump-start procedures in a safe, dry, well-ventilated area.
• Store battery clamps when not in use; never touch them together.
• Keep clamps, cords, clothing, and body parts away from moving vehicle parts.
• Never allow red and black clamps to touch each other or a common metal conductor.
• If clamps are connected incorrectly (polarity), the unit will sound an alarm and display error indicators. Disconnect and reconnect with correct polarity.
• Always disconnect the negative (black) cable first, then the positive (red) cable (except for positive grounded systems).
• Protect battery terminals with tape before disposal.
• Place the unit as far from the battery as cables permit.
• Never allow battery acid to contact the unit.
• Do not operate in a closed area or restrict ventilation.
• This system is designed for 12-volt DC battery systems only.
• Do not use as a replacement for a vehicular battery or operate a vehicle without a battery.
• Excessive cranking can damage the starter motor; discontinue if the engine fails to start after recommended attempts.
• Do not use on watercraft; it is not qualified for marine applications.
• Keep the unit upright during storage, use, and recharging. Protect from direct sunlight, heat, and moisture.

Specific Safety Instructions for USB Power Ports

• Do not insert foreign objects into USB ports.
• Do not attach USB hubs or more than one device per port.
• Do not operate appliances requiring more than 3.1 amps total from the USB ports.

Specific Safety Instructions for Compressors

WARNING: Bursting articles can cause serious injury. Follow instructions on items to be inflated. Never exceed recommended pressure. Monitor pressure gauge.

CAUTION: Never leave the compressor unattended. Do not operate continuously for longer than approximately 10 minutes to prevent overheating.

First Aid

• General: Ensure immediate assistance is available. Always wear protective eyewear.
• Battery Acid Contact:
  • Skin: Rinse immediately with water, then wash thoroughly with soap and water. Seek medical attention if redness, pain, or irritation occurs.
  • Eyes: Flush eyes immediately with clean water for at least 15 minutes and seek immediate medical attention.
• LCD Liquid Crystal Contact:
  • Skin: Wash area completely with plenty of water. Remove contaminated clothing.
  • Eye: Flush affected eye with clean water and seek medical attention.
  • Swallowed: Flush mouth thoroughly with water, drink large quantities of water, and induce vomiting. Seek medical attention.

Operation Procedures

Charging/Recharging the Unit

Lead-acid batteries require routine maintenance. Recharge the unit at least every 30 days and after each use.

IMPORTANT CHARGING NOTES:

• The unit is delivered partially charged; fully charge for 20 hours before first use.
• Recharging after each use prolongs battery life.
• Turn off all other unit functions during recharging.

CAUTION: Failure to keep the battery charged will cause permanent damage.

Procedure:

1. Connect the AC charging adapter's barrel connector to the unit's AC charging port and plug the adapter into a standard 120V AC outlet. The LCD screen will display charging indicators.
2. Charge for approximately 20 hours or until the Battery Status Icon shows 4 solid bars.
3. When charging is complete, disconnect the AC adapter from the power source, then disconnect from the unit.

Viewing Battery Status

The Battery Status Icon and Battery Voltage Indicator on the LCD screen show the battery charge level:

• Four solid bars: Full capacity.
• Two or three solid bars: Partially charged.
• One solid bar: Nearly empty; charge the unit.
• Four empty bars: Completely empty; unit MUST be charged. Low voltage protection will activate, and the unit will shut down.

Wireless Charging

The built-in Wireless Charging feature is suitable for most compatible appliances.

IMPORTANT NOTE: The Wireless Charging function will shut down automatically if no appliance is detected for 3 minutes.

Procedure:

1. Press the Wireless Charging Button. A beep will sound, and the LCD will display the Wireless Charging Indicator flashing.
2. Place the appliance in the center of the Wireless Charging Pad.
3. When charging is complete, press the Wireless Charging Button to turn it off.

IMPORTANT: Ensure Wireless Charging is OFF when recharging or storing the unit.

Jump-Starter Operation

IMPORTANT: All features must be OFF (except the area light) when jump-starting. Keep the unit upright.

WARNING: Follow all safety instructions. Incorrect polarity will trigger an alarm and error indicators. Never touch red and black clamps together. Overheating will activate thermal protection.

Procedure:

1. Turn off vehicle ignition and all accessories. Place vehicle in park and set the emergency brake.
2. Connect the Boost Cables Connector to the Clamp Connection Slot on the unit.
3. Connect the red clamp first, then the black clamp.
4. For NEGATIVE GROUNDED SYSTEMS (Most Common):
   • Connect the positive (+) red clamp to the vehicle battery's positive terminal.
   • Connect the negative (-) black clamp to the vehicle chassis or a solid, non-moving metal part. Never clamp directly to the negative battery terminal or a moving part.
5. For POSITIVE GROUND SYSTEMS:
   • Connect the negative (-) black clamp to the vehicle battery's negative terminal.
   • Connect the positive (+) red clamp to the vehicle chassis or a solid, non-moving metal part. Never clamp directly to the positive battery terminal or a moving part.
6. Once clamps are properly connected, the LCD will indicate readiness (Jump Starter Icon flashing).
7. Turn on the ignition and crank the engine in 5-6 second bursts until it starts. The LCD will show the jump-starting process.
8. Disconnect the negative (-) clamp first, then the positive (+) clamp.

NOTE: If the unit malfunctions after jump-starting, recharge it to reset.

IMPORTANT: Detach the Boost Cables Connector and store it when not in use. Always turn the unit OFF when not in use and recharge fully after each use.

Alternator Check

This check is for 12-volt systems only. Ensure the vehicle battery is fully charged before testing.

PART 1: No Load (Vehicle Accessories OFF)

1. Set up the unit and connect clamps as per Jump-Starter procedure.
2. Press the Alternator Check Button. The LCD will show the unit analyzing the alternator.
3. If the alternator is good, the LCD will display "ALT GOOD".
4. If the alternator is out of range, the LCD will display "ALT" and the Fault Icon will flash.
5. Press the Alternator Check Button again to stop the test.

PART 2: Under Load (Vehicle Accessories ON)

1. Turn on as many vehicle accessories as possible (except A/C and Defrost).
2. Press the Alternator Check Button. The LCD will show the unit analyzing the alternator.
3. If the alternator is good, the LCD will display "ALT GOOD".
4. If the alternator is out of range, the LCD will display "ALT" and the Fault Icon will flash.
5. Press the Alternator Check Button again to stop the test.

IMPORTANT: Always turn the unit off when not in use. Recharge fully after each use.

Portable Compressor Operation

The built-in 12-volt DC compressor can inflate tires and inflatables up to 120 PSI.

WARNING: Follow all safety instructions for compressors.

CAUTION: The compressor may operate normally for periods, then rev down to prevent overheating. Do not operate continuously for longer than 10 minutes. If longer operation is needed, turn off for a 30-minute cooling period.

Inflating Tires or Products with Valve Stems:

1. Screw the Sure Fit® nozzle onto the valve stem.
2. Press the Compressor Power Button. The LCD will display the current pressure and the set pressure.
3. Use the (+) and (-) buttons to set the desired pressure (3-120 PSI).
4. Press the Compressor Power Button again to begin inflating. Monitor the pressure on the LCD.
5. The compressor will stop automatically when the desired pressure is reached.
6. Press the Compressor Power Button again to turn off the unit.
7. Unscrew and remove the nozzle. Allow the unit to cool and recharge before storing.

Inflating Other Inflatables Without Valve Stems:

1. Screw the nozzle adapter into the Sure Fit® nozzle.
2. Insert the nozzle adapter into the item to be inflated.
3. Follow steps 2 through 4 of the "Inflating Tires" procedure. Be aware that small items inflate rapidly.
4. When desired pressure is reached, the compressor stops automatically. Press the Compressor Power Button to turn off the unit.
5. Disconnect the adapter from the item.
6. Unscrew the nozzle adapter from the Sure Fit® nozzle. Allow the unit to cool and recharge before storing.

Store the compressor hose, Sure Fit® nozzle, and nozzle adapter in the storage groove.

USB Ports Usage

The two USB Ports provide a total of 3.1A (5V each). They only provide power, not data communication.

IMPORTANT NOTES:

• The unit monitors for low battery voltage, overload, and short circuit faults. Faults will be indicated on the LCD and may cause the USB ports to shut down.
• If a fault occurs: disconnect the USB device, turn off USB ports, ensure the unit is charged, allow it to cool, and check the USB device for malfunction.
• Some household USB electronics may not operate with this unit.

Procedure:

1. Press the USB Power Button. A beep will sound, USB Power/Fault Indicators will light blue, and the LCD will show the USB Icon.
2. Plug the USB-powered device into the USB port(s).
3. Press the USB Power Button again to turn off the USB Ports.

IMPORTANT: Ensure USB Ports are OFF when recharging or storing the unit.

LED Area Light Usage

The LED Area Light is controlled by its power button.

1. Press the Area Light Power Button once to turn the light ON.
2. Press the Area Light Power Button again to turn the light OFF.

The LCD will briefly activate when the light is turned on.

IMPORTANT: Ensure the Area Light is OFF when recharging or storing the unit.

Troubleshooting

Unit not charging

• Ensure all unit functions are OFF.
• Check AC power source connection and functionality.

Wireless Charging function will not charge appliance

• Ensure Wireless Charging Button is pressed ON.
• Place appliance in the center of the Wireless Charging Pad.
• Check appliance manual for compatibility.
• Ensure the unit has a full charge.

Engine fails to jump-start

• Verify correct polarity cable connection.
• Allow the unit to cool if it overheated during cranking. Ensure all functions are OFF.
• Ensure the unit is not in compressor mode.
• Ensure the unit has a full charge.

Portable Compressor will not inflate

• Ensure Compressor Power Button is pressed ON.
• Ensure the unit is not in Jump Starter mode.
• Ensure the Sure Fit® nozzle or adapter is securely attached to the valve stem or item.
• Ensure the unit has a full charge.

USB Power Port will not power appliance

• Ensure USB Power Button is ON and USB Power/Fault Indicators are solid blue.
• If indicators flash blue, refer to USB Ports section for fault remedies.
• Ensure total draw of USB devices does not exceed 3.1A.
• Check appliance manual for compatibility.
• Ensure the unit has a full charge.

LED Area Light does not come on

• Ensure LED Area Light Power Button is ON.
• Ensure the unit has a full charge.

Care and Maintenance

Batteries lose energy over time. Recharge the unit at least every 30 days when not in use.

Wipe the exterior with a soft cloth. Do not immerse the unit in water.

There are no user-replaceable parts. Periodically inspect adapters, connectors, and wires. Contact the manufacturer for replacements.

Battery Replacement/Disposal

The battery is designed for the service life of the unit and is not replaceable, removable, or serviceable.

Safe Battery Disposal: Contains a sealed, non-spillable, lead-acid battery. Recycling is required. Dispose of according to local, state, and federal regulations.

WARNING: Do not dispose of the battery in fire. Protect exposed terminals with tape before disposal to prevent shorting.

Accessories

Recommended accessories may be available from the manufacturer. Contact 1-877-571-2391 for assistance.

WARNING: Use of unrecommended accessories could be hazardous.

Service Information

For technical advice, repair, or genuine factory replacement parts, contact the manufacturer at 1-877-571-2391.

Two-Year Limited Warranty

The manufacturer warrants this product against defects in materials and workmanship for TWO (2) YEARS from the date of retail purchase by the original end-user purchaser. Claims may result in repair or replacement at the manufacturer's option. Proof of purchase may be required.

This warranty does not cover accessories, bulbs, fuses, batteries, normal wear and tear, accidents, shipping damage, alterations, unauthorized repairs, neglect, misuse, abuse, or failure to follow care and maintenance instructions.

This warranty grants specific legal rights that may vary by state or province. This product is not intended for commercial use.

Appendix: FCC Statements

This device complies with Part 15 and Part 18 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 and Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During operation, maintain a distance of 15 cm surrounding the device and 20 cm above the top surface of the device.

This device complies with Part 18 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and any other radio device.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Specifications

Boost Ampere:

1,000A peak, 350A instant

Battery Type:

SLA, 12V DC

Input:

120V AC, 60Hz, 14W

Compressor:

120 PSI (max.)

USB Output:

5V DC each, 3.1A (max.)

Wireless Charging:

10W (max.)

Sure Fit® is a registered trademark owned by Baccus Global, LLC.

Imported by Baccus Global LLC, 621 NW 53rd St., Suite 450, Boca Raton, FL 33487

Website: www.Baccusglobal.com

Contact: 1-877-571-2391

Model Number: PPS1CWE

RD051821