Poly Voyager Free 60+ UC True Wireless Earbuds with Touchscreen Charge Case

Your Earbud System

Your earbud system easily connects to your mobile phone and computer. The system includes:

• Wireless earbuds with wearing sensors
• USB Bluetooth adapter for connection to high-fidelity computer audio (design varies by model)
• Charge case with touchscreen controls

Diagram illustrating the earbuds placed within the charging case, alongside a USB Bluetooth adapter connected to a computer.

Charge Case Controls

Control features and settings using your charge case touchscreen. Swipe left and right to view navigation menus and tap icons to select menus and control features. Tap X to close a menu.

Diagram depicting a finger interacting with the charge case touchscreen, highlighting icons for battery level, music/streaming, ANC/Transparency Mode, Bluetooth pairing/transmitter, audio source, volume, call answer/end, mute, lock/unlock screen, and Microsoft Teams.

Note: Functionality varies by application. May not function with web-based apps.

Earbud Button Controls

Press an earbud button to control features on your earbud system. To press the raised button on the back of your earbud, pinch the earbud with your thumb and forefinger. Control features using either earbud's button.

Note: Do not press the buttons on both earbuds at the same time. Your earbud features may not function properly.

Diagram illustrating the correct method to press the earbud button by pinching it with thumb and forefinger. A close-up shows the earbud with the button location.

Note: Functionality varies by application. May not function with web-based apps.

Earbud Swipe Sensor Controls

Swipe forward or backward on the earbud swipe sensor to control features on your earbud system. The swipe sensor is next to the metallic windscreen on the top of each earbud stem. Swipe forward or backward to adjust levels or make changes. Control by swiping either earbud.

Note: Do not press the buttons on both earbuds at the same time. Your earbud features may not function properly.

Diagram demonstrating how to swipe forward or backward on the earbud's swipe sensor. A close-up highlights the sensor's location next to the metallic windscreen.

By default, your earbud swipe controls vary by activity. To customize these settings, see Customize your earbud swipe settings.

USB Bluetooth Adapter

Your high-fidelity Bluetooth USB adapter comes pre-paired to your Poly device. Plug it into your computer to connect to high-fidelity computer audio.

Note: Adapter's USB connection and design may vary, but function is the same.

Standard LEDs

LEDs when Microsoft Teams* is detected

Note: *Requires Microsoft Teams desktop application.

Load Software

Download Poly Lens App to get the most out of your device. Some softphones require the installation of Poly software to enable device call control (answer/end and mute) functionality.

• Download Poly Lens Desktop App at poly.com/lens.
• Download Poly Lens Mobile App at poly.com/lens, the App Store or Google Play.

Update Your Poly Device

Keep your firmware and software up-to-date to improve Poly device performance and add new features. Download the app at poly.com/lens.

Update Earbuds

1. To update your earbuds, first remove them from the case to automatically power them on.
2. Go to Poly Lens Mobile App on your paired mobile device or to Poly Lens Desktop App on your connected computer.
3. Select your earbuds from the device list in Poly Lens App to view available updates.
4. Click the update button to wirelessly update earbud firmware or software.

Update Charge Case

Note: This device update requires Poly Lens Desktop App downloaded to your computer.

1. With Poly Lens Desktop App downloaded, plug the charge case into your computer using the provided USB cable.
2. Select your charge case from the device list in Poly Lens Desktop App to view available updates.
3. Click the update button to update charge case firmware or software.

Update Bluetooth USB Adapter

Note: This device update requires Poly Lens Desktop App downloaded to your computer.

1. With Poly Lens Desktop App downloaded, plug your Bluetooth USB adapter into your computer.
2. Select your Bluetooth USB adapter from the device list in Poly Lens Desktop App to view available updates.
3. Click the update button to update Bluetooth USB adapter firmware or software.

Fit

Place earbud in your ear. Rotate down and forward for an optimal fit and sound experience.

Diagram illustrating how to insert an earbud into the ear for optimal fit and sound. Three eartips of varying sizes are shown.

1. Try the 3 eartips to find which size fits you comfortably while blocking external noise.
2. Listen to music and select the eartip that gives you the most bass response.
3. You may prefer a different size eartip in each ear.

Replace Eartips

Change your eartips and lock them in place.

REMOVE:

1. Fold down the eartip's outer cone to reveal the eartip base connection to the earbud.
2. Loosen the notched eartip base from the earbud with your fingernail and remove. Ensure to loosen your eartip from the base so the outer cone isn't torn.
3. Alternatively, carefully twist the eartip base to remove.

REPLACE:

1. Place the eartip base on the earbud microphone column and press into place for a secure fit.
2. The eartip base clicks when locked into place.

Charge

Your earbuds have up to 5.5 hours of talk time when fully charged and can be recharged twice by a fully charged case.

1. To charge your earbuds, place them in the charge case. Your earbuds begin charging when placed in the case.
2. To recharge the case, plug it into a computer or USB charging device using the supplied USB cable. Alternatively, recharge using a third-party wireless charger (not included).

Tip: For fastest charging, plug your charge case into a power outlet.

Diagram showing the earbuds placed inside the charging case, with a red arrow indicating the charging process.

Charge Time

Talk Time

Check Battery Level

Check your earbud system battery level:

• Listen to the battery level alert when you put on the earbuds.
• View earbud and charge case battery level on your charge case Navigation screen > Battery menu.

Note: Each earbud and charge case battery level are shown separately on your Battery menu. A charge [battery-icon] icon is shown when charging. The earbud icon is gray when placed in the charge case.

• View earbud and charge case battery level in Poly Lens App. Download at poly.com/lens.

Quick Charge

Charge your earbuds for 15 minutes for up to a full hour of listening time.

Wireless Charging (Qi Charging)

Your charge case is compatible with third-party Qi wireless chargers.

To charge wirelessly, place the earbuds in the charge case and place your case on your compatible wireless charger. Refer to your wireless charger user guide.

Note: Your earbuds charge only when placed in the charge case. They do not charge if placed directly on the wireless charger.

Diagram showing the charge case positioned on a wireless charging pad.

Power

First Time Power

Your charge case is shipped from the factory in a DeepSleep mode to conserve the battery. On first use, wake your case by pressing the button on the back of the charge case or by plugging into a power source using the provided charge cable.

Power On/Off Your Earbud System

Your earbuds and case power on and off automatically.

To power on, do one of the following:

• Remove your earbuds from the case to automatically power them on. Conversely, place your earbuds in the case to automatically power them off and start charging them.
• To wake your case, tap the screen or press the button on the back of your case. The charge case screen automatically times out when idle. Press the button on the back to power off the screen and lock it.
• Tip: If you don't hear a voice alert when you put on your earbud, click the earbud button once to power it on.

DeepSleep Mode

If you leave your earbuds powered on but out of range of your paired device, they conserve power by entering DeepSleep mode after 90 minutes. To exit DeepSleep mode, power on by clicking each earbud button.

Wake Your Charge Case

Wake your screen to use features or to view status. Your charge case touch screen times out when idle for 15-45 seconds in most cases.

1 Wake your screen by doing one of the following:

• Tap the touch screen.
• Press the button on the back of the case.
• Open and close your charge case lid.
• Plug in to a power source or disconnect from it.

2 Power off your screen by doing one of the following:

• If you do nothing, your charge case touch screen times out when idle.
• To manually power off the screen, press the button on the back of the case.

Connect and Pair

Pair to Mobile Device

1. Remove the earbuds from the charge case to power on.
2. Choose from 2 ways to put your earbuds in pair mode:
   • On your charge case touch screen, select [Bluetooth-icon] > Pair Device. You hear "pairing.".
   • Press and hold your earbud button for 4 seconds until you hear "pairing.".
3. Activate Bluetooth® on your phone and set it to search for new devices.
   • iPhone: Settings > Bluetooth > On*
   • Android™: Bluetooth: On > Scan for devices*

   Note: * Menus may vary by device.

4. Select "Poly VFree 60 Series." When your earbuds are successfully paired, you hear “pairing successful" and "phone connected."

Reconnect

With Bluetooth activated and in range, click your earbud to reconnect to your mobile device.

Connect to PC

Plug your USB Bluetooth adapter into your computer to get the best connection, softphone functionality and acoustic sound quality through your earbuds. The adapter comes pre-paired to your earbuds.

1. Put on your earbuds and insert the USB Bluetooth adapter into your laptop or PC.

Diagram illustrating the USB Bluetooth adapter plugged into a laptop.

The USB adapter LED flashes and then turns solid to indicate the earbuds are connected to the USB adapter. You hear “PC connected” to indicate the connection has been established. When on a call, the LED on the USB adapter flashes blue. When not on a call the LED is solid.

Load Poly Lens Desktop App by visiting poly.com/lens. This allows you to customize your earbud behavior through advanced settings and options.

Configure USB Adapter for Streaming Media

Your high-fidelity Bluetooth USB adapter comes ready to take calls. To stream media, configure your Bluetooth USB adapter.

Windows

1. To configure your Bluetooth USB adapter for streaming media in your PC, go to Start menu > Control Panel > Sound > Playback tab. Select Poly BT700, set it as the Default Device, and click OK.
2. To pause music when you place or receive calls, go to Start menu > Control Panel > Sound > Communications tab and select the desired parameter.

Mac

1. To configure your Bluetooth USB adapter for streaming media on your Mac, go to System Preferences > Sound. On both the Input and Output tabs, select Poly BT700.

Pair BT700 USB Adapter Again

Typically, your USB Bluetooth adapter is pre-paired to your Poly audio device. In the event that your adapter is disconnected or bought separately, you will need to pair the adapter to your Poly device.

Your USB adapter requires Poly Lens Desktop App to pair to a Poly audio device. Download: poly.com/lens.

Note: Adapter design varies by USB connection.

1. Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it.
2. Put your Poly audio device in pair mode.
3. Launch Poly Lens Desktop App and navigate to Poly BT700.
4. Put your Bluetooth USB adapter into pair mode by selecting "Pair new device" on the adapter's main page or overflow menu. Your adapter flashes red and blue. Pairing is successful when you hear "pairing successful" and "PC connected" and the Bluetooth USB adapter LED is solid.

Pair Mode

Put your earbuds in pair mode to connect to a new device or to pair again. Choose from 2 ways to put your earbuds in pair mode:

• On your charge case touch screen, select [Bluetooth-icon] > Pair Device. You hear "pairing."
• Press and hold your earbud button for 4 seconds until you hear "pairing."

Choose Your Audio Source

Use your charge case touch screen to switch your connection to another paired audio device. Your earbud system can connect to up to 2 devices including your USB Bluetooth adapter and remembers up to 8 devices.

To switch your audio source using your charge case touch screen, go to [Audio-source-icon] > Switch Device and select from your remembered device list.

The Basics

Adjust the Volume

Choose:

• Adjust the Volume [volume-up-icon] on your charge case touch screen. Each tap changes the volume one level.
• Adjust the volume on your connected mobile device or computer.
• When streaming media, swipe your earbud sensor to adjust the volume. Swipe forward for volume down or backward for volume up. Each swipe changes the volume by one level.

Note: By default, you may control volume on your earbuds only while streaming media. To customize your volume controls, see Customize your earbud swipe settings on page 21.

Adjust Earbud Microphone Volume (Softphone)

Place a test call and adjust earbud volume and softphone volume accordingly.

Play or Pause Audio

Choose a method to pause or resume streaming audio:

• Use your charge case touch screen.
• With active sensors, remove both earbuds to pause streaming audio. Put on one or both earbuds to resume audio.*

Note: *Functionality varies by application.

• Click your earbud button. Control with either earbud.

Voice Assistant (Smartphone Feature)

Siri, Google Assistant™, Cortana: Press and hold the earbud button for 2 seconds to activate your smartphone's default voice assistant. Wait for the phone prompt to activate voice dialing, search, and other smartphone voice controls.

Note: The voice assistant feature is available when connected only to your smartphone. Ensure your USB Bluetooth adapter is unplugged from your computer to use this feature.

Use Sensors

Smart sensors respond when you put on or take off your headset. Customize in Poly Lens App. Below describes default settings.

Note: *Functionality varies by application. May not function with web-based apps.

ANC and Transparency Mode

Active Noise Canceling (ANC) reduces external noise and enhances your music and sound quality. Transparency Mode allows you to hear your surroundings while wearing your earbuds.

To switch between ANC and Transparency mode, choose from one of the following:

• Earbuds: With your earbuds idle, swipe your earbud's sensor to switch between your selected ANC Mode and your selected Transparency Mode.
• Charge case: Go to Home screen > ANC/Transparency: Tap to view and select your ANC Mode or Transparency Mode.
• Poly Lens App: Go to Settings > ANC: Tap to view and select your ANC Mode or Transparency Mode. For more about these settings, see ANC and Transparency Mode settings on page 22.

Launch Microsoft Teams (Teams Model Only)

You can easily open and use your Teams desktop application with your Microsoft Teams-certified earbud system.

1. Tap your charge case touchscreen's Teams icon to view Microsoft Teams app on your connected computer.
2. Click the button on the back of your earbud to do the following:
   • When not on a call, click your earbud button to view Microsoft Teams app on your computer.
   • When your connected Bluetooth USB adapter LED pulses purple, click your earbud button to view Teams notifications.
   • To raise or lower your hand during a Teams meeting, press and hold your earbud button for 2 seconds.

Note: The purple multifunction button on the back of your earbud is also your Teams button.

Note: Teams model and Teams desktop application required. Teams mobile application is not supported.

Make/Take/End Calls

Make a Call

To make a call, dial using your computer softphone application or connected mobile device.

Answer or End a Call

To answer or end a call, do one of the following:

• Press once on the button on the back of your earbud.
• Put on one or both earbuds to answer a call (with smart sensors active).
• On your charge case touch screen, tap the green Call icon to answer a call. Tap the red End Call icon to end a call.
• Use your connected mobile device or computer softphone application.

Mute

To mute your microphone during a call, do one of the following:

• Select Mute on your charge case touch screen.
• Swipe your earbud to mute or unmute your earbuds.
• Mute from your connected mobile device or computer softphone.

Answer a Second Call

First, click the earbud button to end current call, then click the earbud button again to answer new call.

Redial Last Outgoing Call (Smartphone Feature)

Double-click your earbud button to redial the last outgoing mobile call.

Note: Control with either earbud.

Answer Calls from a Second Device

It's easy to answer calls from two devices. When on a call, you hear a ringtone notification of the incoming call from the second paired device. To answer a second call from the other device, click your earbud button to end the current call and click the button again to answer the new call. If you choose to not answer the second call, it will go to voicemail.

More Features

Customize Your Earbud Swipe Settings

Customize your earbud swipe sensor settings in Poly Lens App. Download the app: poly.com/lens.

By default, your earbud swipe controls vary by activity. To configure in Poly Lens App, go to Settings > Custom swipe sensor. Changes take effect immediately.

Lock Your Charge Case Screen

Lock your screen to prevent changes on your touch screen. Lock your screen by tapping the [unlock-icon] icon on the right top corner. To unlock, tap 3 times on the [locked-icon] screen.

Bluetooth Transmitter

Stream audio wirelessly from an in-flight entertainment system or other audio source with a 3.5 mm port.

1. Connect the supplied adapter cable from your charge case USB-C port to the audio source's 3.5 mm port. You hear "device connected." Your earbuds are now connected to the audio source with your charge case working as your Bluetooth transmitter.
2. Stream audio from the connected audio source.
3. To disconnect, go to your charge case homescreen and select Bluetooth > Bluetooth transmitter > Stop streaming and disconnect the adapter cable from your charge case. You hear "device disconnected."

ANC and Transparency Mode Settings

Choose your preferred settings for ANC (Active Noise Canceling) and Transparency Mode. Choose settings in Poly Lens App or on your charge case touchscreen.

Connect New Earbud

Connecting a replacement new earbud to your existing system is easy.

1. To connect your new earbud to the existing one, place them both in the charge case.
2. Close the case lid and wait for 10 or more seconds to complete the connection.
3. In some cases, you may need to pair your earbuds again to your Bluetooth USB adapter. The adapter plugs into your computer to connect to high-fidelity computer audio. To pair again, see Pair BT700 USB adapter again on page 16.

Troubleshooting

Pairing

Audio

Calls

General

Safety Warnings

Safety Instructions

To reduce the risk of fire, electric shock, injury to persons and damage to property, read all operating instructions and the following safety instructions before using your Poly product. Operating, storage and charging temperature is 10°C to 40°C (50°F to 104°F).

• Only use those Poly products and accessories designed for use with this product.
• If you experience a skin irritation after using this product, discontinue use and contact Poly.
• CHILDREN. Never allow children to play with the product-small parts may be a choking hazard.
• Do not disassemble the product as this may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock or fire when the product is subsequently used.
• Unplug, discontinue use and contact Poly if the product overheats or has a damaged outer casing, cord or plug.
• Exposure to high volume sound levels or excessive sound pressure may cause temporary or permanent damage to your hearing. Although there is no single volume setting that is appropriate for everyone, you should always use your headset/headphones with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels. The louder the volume, the less time is required before your hearing could be affected. You may experience different sound levels when using your headset/headphones with different devices. The device you use and its settings affect the level of sound you hear. If you experience hearing discomfort, you should stop listening to the device through your headset/headphones and have your hearing checked by your doctor. To protect your hearing, some hearing experts suggest that you:
  1. Set the volume control in a low position before putting your headset/headphones on your ears and use as low a volume as possible.
  2. Avoid turning up the volume to block out noisy surroundings. Whenever possible, use your headset/headphones in a quiet environment with low background noise.
  3. Limit the amount of time you use headsets/headphones at high volume levels.
  4. Turn the volume down if the sound from the headset/headphones prevent you from hearing people speaking near you.
  See poly.com/healthandsafety for more information on headsets/headphones and hearing.
• If you use your headset/headphones while driving, check local laws regarding use of a mobile phone and headset, and ensure your attention and focus remain on driving safely. Use of a headset/headphones that covers both ears will impair your ability to hear other sounds and in most regions is illegal to use while operating a motor vehicle or riding a bicycle and may be a serious hazard for you and others.
• If this product includes earbuds/eartips, install and use them in accordance with the instructions provided. Do not force earbuds/eartips down the ear canal. Consult a doctor if they become lodged in the ear canal.
• Plug the mains adapter or charger into a socket-outlet that is near to the equipment and will be easily accessible.

Battery Warnings for Wireless Products

• If your product has an embedded, non-replaceable battery, do not attempt to open the product or remove the battery as this may cause injury and/or damage the product. If your product has a replaceable battery, use only the battery type supplied by Poly. Remove a spent battery promptly.
• Replace rechargeable batteries after three years or 300 charge cycles, whichever occurs first.
• Do not dispose of the product or battery in a fire or heat above 40°C (104°F).
• Do not expose the battery to extremely high temperatures. It may result in an explosion or the leakage of flammable liquid or gas.
• Do not open, deform or mutilate the battery. There may be corrosive materials which can cause damage to eyes or skin and may be toxic if swallowed.
• Never put batteries in mouth. If swallowed, contact a physician or poison control center.
• Swallowing may lead to burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion.
• Always store batteries where children cannot reach them.
• Do not allow any battery or its holder to contact metal objects such as keys or coins.
• RECYCLING: The product battery must be recycled or disposed of properly. Contact your local recycling center for battery removal and proper disposal.
• Use only the charger supplied by Poly to charge the product and follow the charging instructions provided. Alternatively, if your headset is designed to be charged with your cell phone charger, use only cell phone chargers approved and provided by your cell phone manufacturer. Do not use the charger for any other purpose. Ensure that the voltage rating corresponds to the power supply you intend to use.

Support

NEED MORE HELP?

poly.com/support

Manufacturer:

Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States

Plantronics B.V.
Scorpius 171
2132 LR Hoofddorp
Netherlands

Plantronics Ltd.
Building 4, Foundation Park
Cannon Lane, Part 1st Floor
Maidenhead, SL6 3UD
United Kingdom

© 2023 Poly. Bluetooth is a registered trademark of Bluetooth SIG, Inc. All trademarks are the property of their respective owners. Manufactured by Plantronics, Inc.

Model ID: Earbuds F60T (F60TR, F60TL), adapter BT700/BT700C, charge case CBF60+. 221621-06 03.23