poly F60T Voyager Free 60 UC True Wireless Earbuds User Guide

User Guide for poly models including: F60T Voyager Free 60 UC True Wireless Earbuds, F60T, Voyager Free 60 UC True Wireless Earbuds, Free 60 UC True Wireless Earbuds, True Wireless Earbuds, Wireless Earbuds, Earbuds

Poly Voyager Free 60 UC True Wireless Earbuds with Basic Charge Case User Guide

HP, Inc.

[PDF] Poly Voyager Free 60 UC True Wireless Earbuds with ... - HP.com

customize your ear bud behavior through advanced settings and options. ... The earbud audio is not working as expected when ... A call is not automatically answered.

File Info : application/pdf, 31 Pages, 436.49KB

pdf 8577781 en-US-1

Poly Voyager Free 60 UC True Wireless Earbuds with Basic Charge Case User Guide
SUMMARY This guide provides the end-user with task-based user information for the featured product.

Legal information

Copyright and license
© 2024, HP Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Trademark credits
All third-party trademarks are the property of their respective owners. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license.
Privacy policy
HP complies with applicable data privacy and protection laws and regulations. HP products and services process customer data in a manner consistent with the HP Privacy Policy. Please refer to HP Privacy Statement.
Open source software used in this product
This product contains open source software. You may receive the open source software from HP up to three (3) years after the distribution date of the applicable product or software at a charge not greater than the cost to HP of shipping or distributing the software to you. To receive software information, as well as the open source software code used in this product, contact HP by email at ipgoopensourceinfo@hp.com.

Table of contents

Your earbud system 1

Earbud button controls 2

Earbud swipe sensor controls

USB Bluetooth adapter 4

Load software

Update your Poly device 5

Fit

Replace eartips 7

Charge 8 Check battery level 8 Quick charge 9 Wireless charging (Qi charging) 9

Power 10

Power on/off your earbud system 10

DeepSleep mode

Connect and pair

Pair to mobile device 11

Reconnect

Pair to PC with Bluetooth direct

Connect to PC 12 Configure USB adapter for streaming media 12 Pair BT700 USB adapter again 13

Pair mode 13

The basics 14

Adjust the volume

Adjust earbud microphone volume (softphone) 14

Play or pause audio 14

Voice assistant (smartphone feature) 15

Use sensors

ANC and Transparency Mode 15

Launch Microsoft Teams (Teams model only) 15

Make/Take/End Calls 17

iii

Make a call 17

Answer or end a call

Mute

Answer a second call 17

Redial last outgoing call (smartphone feature) 17

Answer calls from a second device

More Features

Customize your earbud swipe settings 19

ANC and Transparency Mode settings 19

Connect new earbud 20

Troubleshooting 21

Pairing

Audio

Calls 23

General

Safety warnings

Safety Instructions

Support

Your earbud system
Your earbud system easily connects to your mobile phone and computer. The system includes: Wireless earbuds with wearing sensors USB Bluetooth adapter for connection to high-fidelity computer audio (design
varies by model) Charge case with battery-status LED Soft case with a pocket for your USB Bluetooth adapter and charge cable
Your earbud system 1

Earbud button controls
Press an earbud button to control features on your earbud system. To press the raised button on the back of your earbud, pinch the earbud with your thumb and forefinger. Control features using either earbud's button. NOTE: Do not press the buttons on both earbuds at the same time. Your earbud features may not function properly.

:04
Siri/Google Assistant :02

Control

Button action

Call answer/end Click once

Bluetooth pairing Press and hold for 4 seconds. For more, see Pair to mobile device on page 11.

Pause/play media Click once *

Microsoft Teams With earbuds idle, click to interact with Microsoft Teams (requires Teams model and Teams desktop app).

Siri/ Default phone Google assistant Assistant

Press and hold for 2 seconds

NOTE: *Functionality varies by application. May not function with web-based apps.

2 Chapter 2 Earbud button controls

Earbud swipe sensor controls
Swipe forward or backward on the earbud swipe sensor to control features on your earbud system. The swipe sensor is next to metallic windscreen on the top of each earbud stem. Swipe forward or backward to adjust levels or make changes. Control by swiping either earbud. NOTE: Do not press the buttons on both earbuds at the same time. Your earbud features may not function properly.

By default, your earbud swipe controls vary by activity. To customize these settings, see Customize your earbud swipe settings on page 19.

Control Volume up

Activity
Streaming media

Volume down Mute

Streaming media
On a call

ANC (Active Noise Canceling) / Transparency Mode

Earbuds idle

Swipe sensor gesture
While streaming media,swipe backward. For more, see Adjust the volume. on page 14
While streaming media,swipe forward.
During an active call,swipe to mute or unmute. For details, see Mute on page 17.
With earbuds idle, swipe to switch between ANC and Transparency Mode. For details,see ANC and Transparency Mode on page 15.

Earbud swipe sensor controls 3

USB Bluetooth adapter

Your high-fidelity Bluetooth USB adapter comes pre-paired to your Poly device. Plug it into your computer to connect to high-fidelity computer audio.
NOTE: Adapter's USB connection and design may vary, but function is the same.

Standard LEDs USB LEDs Flashing red and blue Solid blue Flashing blue Solid red Flashing purple

What they mean Pairing Device connected On a call Mute active Streaming media from computer

LEDs when Microsoft Teams* is detected

USB LEDs

What they mean

Flashing red and blue Pairing

Solid purple

Microsoft Teams connected

Flashing blue

On a call

Solid red

Mute active

Pulsing purple

Microsoft Teams notification

NOTE: *Requires Microsoft Teams desktop application.

4 Chapter 4 USB Bluetooth adapter

Load software
Download Poly Lens App to get the most out of your device. Some softphones require the installation of Poly software to enable device call control(answer/end and mute) functionality.
NOTE: Administrative privileges may be required to download the desktop application. If you don't have administrator privileges on your system, contact your system administrator.
Download Poly Lens Desktop App at hp.com/lens-app . Download Poly Lens Mobile App at hp.com/lens-app , the App Store or Google
Play.

Configure call control for softphones
Change headset language
Enable features
Choose preferred Equalizer setting
Battery meter
Update device firmware
Manage notifications and alerts
Schedule health and wellness reminders
View user guide
FindMyHeadset

Poly Lens Mobile App available for some softphones

Poly Lens Desktop App

Update your Poly device
Keep your firmware and software up-to-date to improve Poly device performance and add new features. Download the app at hp.com/lens-app .
1. Update earbuds
a. To update your earbuds, first open the case to automatically power them on.

Load software 5

b. Go to Poly Lens Mobile App on your paired mobile device or to Poly Lens Desktop App on your connected computer.
c. Select your earbuds from the device list in Poly Lens App to view available updates.
d. Click the update button to wirelessly update earbud firmware or software.
2. Update Bluetooth USB adapter NOTE: This device update requires Poly Lens Desktop App downloaded to your computer a. To update your Bluetooth USB adapter, first remove the earbuds from the case to automatically power them on. b. With Poly Lens Desktop App downloaded, plug your Bluetooth USB adapter into your computer. c. Select your Bluetooth USB adapter from the device list in Poly Lens Desktop App to view available updates. d. Click the update button to update Bluetooth USB adapter firmware or software.
6 Chapter 5 Load software

Fit

1. Try the 3 eartips to find which size fits you comfortably while blocking external noise.
2. Listen to music and select the eartip that gives you the most bass response.
3. You may prefer a different size eartip in each ear.

Replace eartips

Change your eartips and lock them in place.
1. REMOVE:
a. Fold down the eartip's outer cone to reveal the eartip base connection to the earbud.
b. Loosen the notched eartip base from the earbud with your fingernail and remove. Ensure to loosen your eartip from the base so the outer cone isn't torn.
c. Alternatively, carefully twist the eartip base to remove.

2. REPLACE:
a. Place the eartip base on the earbud microphone column and press into place for a secure fit.
b. The eartip base clicks when locked into place.

Fit 7

Charge

1. To charge your earbuds, place them in the charge case. Your earbuds begin charging when placed in the case.
2. To recharge the case, plug it into a computer or USB charging device using the supplied USB cable. Alternatively, recharge using a third-party wireless charger (not included).
TIP: For fastest charging, plug your charge case into a power outlet.

3. Your charge case LEDs blink every 10 seconds when charging and turn off when fully charged.

Table 7-1 Charge time

Device

Charge time

Charge case and earbuds

Approximately 3 hours

Earbuds only Charge case only

Approximately 2 hours Approximately 2 hours

Table 7-2 Talk time Device Earbuds with ANC off Earbuds with ANC on Charge case

Talk time Up to 5.5 hours Up to 5 hours Up to 11 hours

Check battery level
Check your earbud system battery level: Listen to the battery level alert when you put on the earbuds.

8 Chapter 7 Charge

View charge case LEDs. The center LED indicates the charge case battery level. Left and right LEDs show earbud battery level when earbuds are in the case.
NOTE: To activate LEDs, open your case lid, press the case button, or connect/remove the charge case from a power source.
View earbud and charge case battery level in Poly Lens App . Download at hp.com/lens-app .

Voice alert "Battery high" "Battery medium" "Battery low" "Battery critical"

Charge case LEDs Green Green Yellow Red

Talk time 3 hours or more 1 to 3 hours 10 minutes to1 hour Less than 10minutes

Quick charge

Charge your earbuds for 15 minutes for up to a full hour of listening time.

Wireless charging (Qi charging)
Your charge case is compatible with third-party Qi wireless chargers.
To charge wirelessly, place the earbuds in the charge case and place your case on your compatible wireless charger. Refer to your wireless charger user guide.
NOTE: Your earbuds charge only when placed in the charge case. They do not charge if placed directly on the wireless charger.

Quick charge 9

Power
Power on/off your earbud system
Your earbuds and case power on and off automatically. To power on, do one of the following:
Open your charge case to automatically power on the earbuds. Conversely, place your earbuds in the case and close the lid to automatically power your earbuds off and start charging them.
TIP: If you don't hear a voice alert when you put on your earbud, click the earbud button once to power it on.
DeepSleep mode
If you leave your earbuds powered on but out of range of your paired device, they conserve power by entering DeepSleep mode after 90 minutes. To exit DeepSleep mode, power on by clicking each earbud button.
10 Chapter 8 Power

Connect and pair
Pair to mobile device
1. Choose from 2 ways to put your earbuds in pair mode. Press and hold your earbud button for 4 seconds until you hear "pairing."

Reconnect

With your earbuds in the charge case, open the lid and press the charge case button for 4 seconds. The charge case LEDs flash red and blue.
2. Activate Bluetooth® on your phone and set it to search for new devices. iPhone Settings > Bluetooth > On* Android Bluetooth: On > Scan for devices* NOTE: * Menus may vary by device.
3. Select "Poly VFree 60 Series." When your earbuds are successfully paired, you hear "pairing successful" and "phone connected."
With Bluetooth activated and in range, click your earbud to reconnect to your mobile device.

Pair to PC with Bluetooth direct
Quickly pair to your PC with Bluetooth direct PC pairing and Poly Lens Desktop App . Poly Lens Desktop App improves softphone call control and call quality.
This feature requires Poly Lens Desktop App 2.0. Download the app at hp.com/ lens-app .
Ensure that Swift Pair is enabled in the Bluetooth settings of your PC to use this pairing method. Go to Settings > Bluetooth & other devices and select Show notifications to connect using Swift Pair.
1. To put your earbuds in pair mode, do one of the following:
Press and hold your earbud button for 4 seconds until you hear "Pairing."

Connect and pair 11

Connect to PC

With your earbuds in the charge case, open the lid and press the charge case button for 4 seconds. The charge case LEDs flash red and blue.
2. Select connect on the PC notification. When your earbuds are successfully paired, you hear "Pairing successful" and "PC connected." You receive a PC notification that the device is paired and ready to use.
1. Put on your earbuds and insert the USB Bluetooth adapter into your laptop or PC.

2. The USB adapter LED flashes and then turns solid to indicate the earbuds are connected to the USB adapter. You hear "PC connected" to indicate the connection has been established. When on a call, the LED on the USB adapter flashes blue. When not on a call the LED is solid.
3. Load Poly Lens Desktop App by visiting hp.com/lens-app . This allows you to customize your ear bud behavior through advanced settings and options.
Configure USB adapter for streaming media
Your high-fidelity Bluetooth USB adapter comes ready to take calls. To stream media, configure your Bluetooth USB adapter. Windows
12 Chapter 9 Connect and pair

1. To configure your Bluetooth USB adapter for streaming media in your PC, go to Start menu > Control Panel > Sound > Playback tab. Select Poly BT700 set it as the Default Device and click OK.
2. To pause music when you place or receive calls, go to Start menu > Control Panel > Sound > Communications tab and select the desired parameter.
Mac
To configure your Bluetooth USB adapter for streaming media on your Mac, go to System Preferences > Sound. On both the Input and Output tabs, select Poly BT700.
Pair BT700 USB adapter again
Typically, your USB Bluetooth adapter is pre-paired to your Poly audio device. In the event that your adapter is disconnected or bought separately, you will need to pair the adapter to your Poly device.
Your USB adapter requires Poly Lens Desktop App to pair to a Poly audio device. Download: hp.com/lens-app .

Pair mode

NOTE: Adapter design varies by USB connection. 1. Insert the high-fidelity Bluetooth USB adapter into your laptop or computer
and wait for your computer to recognize it. 2. Put your Poly audio device in pair mode. 3. Launch Poly Lens Desktop App and navigate to Poly BT700. 4. Put your Bluetooth USB adapter into pair mode by selecting "Pair new device"
on the adapter's main page or overflow menu. Your adapter flashes red and blue. Pairing is successful when you hear "pairing successful" and "PC connected" and the Bluetooth USB adapter LED is solid.
Put your earbuds in pair mode to connect to a new device or to pair again. Press and hold your earbud button for 4 seconds until you hear "pairing."

Pair BT700 USB adapter again 13

The basics
Adjust the volume
Choose: Adjust the volume on your connected mobile device or computer. When streaming media, swipe your earbud sensor to adjust the volume. Swipe
forward for volume down or backward for volume up. Each swipe changes the volume by one level. NOTE: By default, you may control volume on your earbuds only while streaming media. To customize your volume controls, see Customize your earbud swipe settings on page 19.
Adjust earbud microphone volume (softphone)
Place a test call and adjust earbud volume and softphone volume accordingly.
Play or pause audio
Choose a method to pause or resume streaming audio: With active sensors, remove both earbuds to pause streaming audio. Put on one or both earbuds to resume audio.* NOTE: *Functionality varies by application. Click your earbud button. Control with either earbud.
14 Chapter 10 The basics

Voice assistant (smartphone feature)
Siri, Google AssistantTM, Cortana Press and hold the earbud button for 2 seconds to activate your smartphone's default voice assistant. Wait for the phone prompt to activate voice dialing, search, and other smartphone voice controls.

Use sensors

Smart sensors respond when you put on or take off your headset. Customize in Poly Lens App . Below describes default settings.

With active sensors Incoming call Music/streaming media

Putting on earbuds will: Answer the incoming call Resume music/media*

Taking off earbuds will: -Pause music/media*

NOTE: *Functionality varies by application. May not function with web-based apps.
ANC and Transparency Mode
Active Noise Canceling (ANC) reduces external noise and enhances your music and sound quality. Transparency Mode allows you to hear your surroundings while wearing your earbuds.
To switch between ANC and Transparency mode, choose from one of the following:
Earbuds: With your earbuds idle, press your earbud's button for 2 seconds to switch between your selected ANC Mode and your selected Transparency Mode.
Poly Lens App : Go to Settings > ANC: Tap to view and select your ANC Mode or Transparency Mode. For more about these settings, see ANC and Transparency Mode settings on page 19.
Launch Microsoft Teams (Teams model only)
You can easily open and use your Teams desktop application with your Microsoft Teams-certified earbud system.
Click the button on the back of your earbud to do the following:
When not on a call, click your earbud button to view Microsoft Teams app on your computer.
When your connected Bluetooth USB adapter LED pulses purple, click your earbud button to view Teams notifications.

Voice assistant (smartphone feature) 15

To raise or lower your hand during a Teams meeting, press and hold your earbud button for 2seconds.
NOTE: The purple multifunction button on the back of your earbud is also your Teams button. NOTE: Teams model and Teams desktop application required. Teams mobile application is not supported.
16 Chapter 10 The basics

Make/Take/End Calls

Make a call

To make a call, dial using your computer softphone application or connected mobile device.

Answer or end a call
To answer or end a call, do one of the following: Press once on the button on the back of your earbud. Put on one or both earbuds to answer a call (with smart sensors active).

Mute

Use your connected mobile device or computer softphone application.
To mute your microphone during a call, do one of the following: Swipe your earbud to mute or unmute your earbuds.

Mute from your connected mobile device or computer softphone.
Answer a second call
First, click the earbud button to end current call, then click the earbud button again to answer new call.
Redial last outgoing call (smartphone feature)
Double-click your earbud button to redial the last outgoing mobile call. NOTE: Control with either earbud.
Make/Take/End Calls 17

Answer calls from a second device
It's easy to answer calls from two devices. When on a call, you hear a ringtone notification of the incoming call from the second paired device. To answer a second call from the other device, click your earbud button to end
the current call and click the button again to answer the new call. If you choose to not answer the second call, it will go to voicemail.
18 Chapter 11 Make/Take/End Calls

More Features
Customize your earbud swipe settings
Customize your earbud swipe sensor settings in Poly Lens App . Download the app: hp.com/lens-app .

By default, your earbud swipe controls vary by activity. To configure in Poly Lens App , go to Settings > Custom swipe sensor. Changes take effect immediately.

Activity Earbuds are idle (not on a call or streaming media)
On a call
Streaming media or music

Available swipe sensor settings Switch between ANC/Transparency Mode (default) Adjust volume Status check Do nothing Switch between Mute/Unmute (default) Adjust volume Switch between ANC on/off Hold/resume call Do nothing Adjust volume (default) Switch between ANC/Transparency Mode Track forward/track backward Do nothing

ANC and Transparency Mode settings
Choose your preferred settings for ANC (Active Noise Canceling) and Transparency Mode.
Choose settings in Poly Lens App .

More Features 19

Category ANC

Setting Adaptive (default)

ANC

Standard

ANC
Transparency Mode

Off Speech (default)

Transparency Mode

Environment

Transparency Off Mode

Description
Detects differences in user fit or movement while wearing and automatically adjusts to provide the best ANC experience
Optimized to reduce external noise for office
Provide a more natural audio experience and enhanced sidetone comfort
ANC powered off
Optimized for face-to-face communication while wearing your earbuds
Best for busy streets
Optimized to hear your surroundings while wearing your earbuds
Transparency Mode powered off

Connect new earbud
Connecting a replacement new earbud to your existing system is easy.
1. To connect your new earbud to the existing one, place them both in the charge case.

2. Close the case lid and wait for 10 or more seconds to complete the connection.

20 Chapter 12 More Features

Troubleshooting

Pairing

Issue

Resolution

How do I pair my earbuds to a mobile device?

See Pair to mobile device on page 11.

How do I pair my earbuds to a computer or laptop?

Plug in the hi-fidelity USB Bluetooth adapter to your computer or laptop. The adapter is paired to your earbuds and connects to computer audio. See Connect to PC on page 12.

Why should I use the USB Bluetooth adapter instead of my computer's Bluetooth?

Your USB Bluetooth adapter provides the best PC connection, softphone functionality and acoustic sound quality through your earbuds. See Connect to PC on page 12, Configure USB adapter for streaming media on page 12.

How do I pair my USB Bluetooth adapter to another supported Poly audio device?

Poly Lens Desktop App is required to pair your USB Bluetooth adapter to another device. Your Bluetooth adapter remembers up to 2 supported Poly audio devices, but connects to only one at a time. See Pair USB adapter again on page 13.

I can't connect to my paired device or get Reconnect earbuds to your paired device by

error messages when I try to connect.

clicking either earbud button.

Ensure that Bluetooth is enabled on your paired device.

Ensure that your earbuds are removed from your case, powered on and paired to your mobile device. See Pair mode on page 13.

Ensure that your earbud firmware is up-to-date in Poly Lens App . See

Can I connect my earbuds to a mobile phone and computer at the same time?

Yes, your headset can connect to mobile and computer. Your headset remembers up to 8 devices, but connects to up to 2 devices at a time. That includes the USB Bluetooth adapter.

Troubleshooting 21

Audio

Issue

Resolution

I can't hear anything in one or both earbuds.

Check earbud volume level. See Adjust the volume on page 14.

Check volume level on your paired mobile device.

Check volume level on your connected computer.

Power off and on to reset your earbuds. See Power on/off earbuds on page 10.

Ensure that your earbuds are powered on and paired to your mobile device. See Pair to mobile device on page 11.

How do I adjust the volume?

By default, swiping your earbud adjusts your volume only when streaming media and not during other activities. Each swipe changes the volume one level. See Adjust the volume on page 14.

To customize your earbud swipe controls, seeCustomize your earbuds on page 19.

I want to control volume from my earbuds Customize your earbud settings to control volume

at all times.

at all times in Poly Lens App . By default, swiping

your earbud adjusts your volume only when

streaming media and not during other activities.

See Customize your earbuds on page 19.

The earbud audio is not working as expected when connected to my computer.
During a call, nobody can hear me
During a call, I can't hear anybody
Music is not coming through my earbuds

Check the following:
Plug in the hi-fidelity USB Bluetooth adapter to your computer or laptop. The adapter is paired to your earbuds and connects to computer audio. See Connect to PC on page 12.
To configure the earbud sound on your computer, see Configure USB adapter for streaming media on page 12.

When I play music and a call comes in, the music is too loud or doesn't pause

Ensure that only one softphone application is opened at a time.
For best performance, ensure your earbud system firmware is up-to-date. See Update your Poly device on page 5.

22 Chapter 13 Troubleshooting

Calls General

Issue

Resolution

My earbud call control is not working as expected when on a softphone call.

Check the following:
Ensure that only one softphone application is opened at a time.

Power off and on your earbuds. To power off, place them in the charge case and close the lid. To power on, open the lid and remove the earbuds.

If required to enable headset control (answer/end and mute) functionality, ensure you have Poly Lens Desktop App installed. See Load software on page 5.

Select your softphone application in Poly Lens Desktop App .

For best performance,ensure your earbud system firmware is up-to-date. See Update your Poly device on page 5.

How do I interact with Microsoft Teams?

To interact with Microsoft Teams, tap the earbud button (Teams-certified model).

Set your target phone by going to Poly Lens Desktop App > Softphones > Software Settings > Target Softphone

Does my Microsoft Teams-enabled earbud system work with other softphones?

Yes, while your headset is optimized for Microsoft Teams, it can be configured to use with other supported softphones. Set your target phone by going to Poly Lens Desktop App > Softphones > Software Settings > Target Softphone

When you configure another softphone, the Call button:

doesn't interact with Teams

doesn't go to Teams notifications

will not launch Cortana

Issue

Resolution

Can I control features using either earbud? Yes, use the button or swipe controls on either earbud, but not on both earbuds at the same time.

The button control is on the back of each earbud Learn more about Earbud button controls on page 2.

The swipe sensor control is next to the metallic windscreen on the top of each earbud. Learn more aboutEarbud swipe sensor controls on page 3.

Calls 23

Issue I want to customize my earbud features.
The earbud sensors are not working as expected. A call is not automatically answered
when I put on both of my earbuds Streaming media doesn't pause
when I remove both earbuds

Resolution
Customize your device settings with Poly Lens App . See Load software on page 5 and Customize your earbud swipe settings on page 19.
Understand your earbud wearing sensors. SeeUse sensors on page 15.
Power off and on to reset your earbuds. See Power on/off earbuds on page 10.
Ensure your computer is configured for streaming media: Configure USB adapter for streaming media on page 12.
Customize or turn off your earbud wearing sensor settings in Poly Lens App . Download the app: hp.com/lens-app
TIP: For best audio performance while exercising, turn off wearing sensors in Poly Lens App .

24 Chapter 13 Troubleshooting

Safety warnings
Safety Instructions
To reduce the risk of fire, electric shock, injury to persons and damage to property, read all operating instructions and the following safety instructions before using your Poly product. Operating, storage and charging temperature is 10°C to 40°C (50°F to 104°F).
Only use those Poly products and accessories designed for use with this product.
If you experience a skin irritation after using this product, discontinue use and contact Poly.
CHILDREN. Never allow children to play with the product-small parts may be a choking hazard.
Do not disassemble the product as this may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock or fire when the product is subsequently used.
Unplug, discontinue use and contact Poly if the product overheats or has a damaged outer casing, cord or plug.
Exposure to high volume sound levels or excessive sound pressure may cause temporary or permanent damage to your hearing. Although there is no single volume setting that is appropriate for everyone, you should always use your headset/headphones with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels. The louder the volume, the less time is required before your hearing could be affected. You may experience different sound levels when using your headset/headphones with different devices. The device you use and its settings affect the level of sound you hear. If you experience hearing discomfort, you should stop listening to the device through your headset/headphones and have your hearing checked by your doctor. To protect your hearing, some hearing experts suggest that you:
1. Set the volume control in a low position before putting your headset/ headphones on your ears and use as low a volume as possible.
2. Avoid turning up the volume to block out noisy surroundings. Whenever possible, use your headset/headphones in a quiet environment with low background noise.
3. Limit the amount of time you use headsets/headphones at high volume levels.
4. Turn the volume down if the sound from the headset/headphones prevent you from hearing people speaking near you.
See poly.com/healthandsafety for more information on headsets/headphones and hearing.
Safety warnings 25

If you use your headset/headphones while driving, check local laws regarding use of a mobile phone and headset, and ensure your attention and focus remain on driving safely. Use of a headset/headphones that covers both ears will impair your ability to hear other sounds and in most regions is illegal to use while operating a motor vehicle or riding a bicycle and may be a serious hazard for you and others.
If this product includes earbuds/eartips, install and use them in accordance with the instructions provided. Do not force earbuds/eartips down the ear canal. Consult a doctor if they become lodged in the ear canal.
Plug the mains adapter or charger into a socket-outlet that is near to the equipment and will be easily accessible.
Battery Warnings for Wireless Products
If your product has an embedded, non-replaceable battery, do not attempt to open the product or remove the battery as this may cause injury and/or damage the product. If your product has a replaceable battery, use only the battery type supplied by Poly. Remove a spent battery promptly.
Replace rechargeable batteries after three years or 300 charge cycles, whichever occurs first.
Do not dispose of the product or battery in a fire or heat above 40°C (104°F).
Do not expose the battery to extremely high temperatures. It may result in an explosion or the leakage of flammable liquid or gas.
Do not open, deform or mutilate the battery. There may be corrosive materials which can cause damage to eyes or skin and may be toxic if swallowed.
Never put batteries in mouth. If swallowed, contact a physician or poison control center.
Swallowing may lead to burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion.
Always store batteries where children cannot reach them.
Do not allow any battery or its holder to contact metal objects such as keys or coins.
RECYCLING: The product battery must be recycled or disposed of properly. Contact your local recycling center for battery removal and proper disposal.
Use only the charger supplied by Poly to charge the product and follow the charging instructions provided. Alternatively, if your headset is designed to be charged with your cell phone charger, use only cell phone chargers approved and provided by your cell phone manufacturer. Do not use the charger for any other purpose. Ensure that the voltage rating corresponds to the power supply you intend to use.
26 Chapter 14 Safety warnings

Support

NEED MORE HELP? support.hp.com/poly
HP Inc. 1501 Page Mill Road Palo Alto, CA 94304, U.S.A. 650-857-1501
HP REG 23010, 08028 Barcelona, Spain
HP Inc UK Ltd Regulatory Enquiries, Earley West 300 Thames Valley Park Drive Reading, RG6 1PT United Kingdom
66 10 02-37899900
RMN (Regulatory Model Number): Earbuds F60T (F60TR, F60TL), adapter BT700/ BT700C, charge case CBF60.

Support 27

References

Antenna House PDF Output Library 7.2.1732