Philips AIS6010, AIS6020 All-in-One Garment Steamer

Getting Started

This section provides an overview of the components and initial setup.

Key Components:

• Main unit with water tank
• Steam hose and head
• Adjustable pole with hanger
• Base with power cord

Refer to the diagrams for assembly and identification of parts.

Important Safety Instructions

Please read all instructions before use.

• Do not touch hot surfaces. Use handles or knobs.
• To protect against electric shock, do not immerse the cord, plug, or appliance in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been dropped or damaged in any manner.
• The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
• Do not use outdoors.
• Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Do not use the appliance for anything other than its intended use.
• Scalding may occur if the appliance is tilted or touches hot water or steam.
• Do not immerse the appliance in water or other liquids.
• Maximum weight on the board: 5 kg.

Assembly and Setup

Follow these steps to assemble your garment steamer:

1. Attach the pole to the base.
2. Secure the pole with the locking mechanism.
3. Attach the hanger support to the top of the pole.
4. Connect the steam hose to the main unit.
5. Fill the water tank with distilled or demineralized water.
6. Ensure all connections are secure before use.

Operation

Filling the Water Tank:

1. Remove the water tank.
2. Open the cap and fill with water.
3. Close the cap and reinsert the tank.

Steaming Garments:

1. Plug in the appliance and turn it on.
2. Wait for the steam ready indicator (approx. 80 seconds).
3. Hang the garment on the hanger.
4. Direct the steam head towards the garment and press the steam button.
5. Move the steam head up and down the garment.
6. For delicate fabrics, maintain a distance of at least 10 cm.

Steam Settings:

• Adjust steam intensity as needed.
• Some models may have different steam levels.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity.

Descaling:

1. Descale the appliance every 1-2 months, depending on water hardness.
2. Follow the specific descaling instructions in the digital manual.
3. Use a descaling solution or a vinegar-water mixture.
4. Rinse thoroughly after descaling.

Cleaning:

• Wipe the exterior with a damp cloth.
• Clean the steam head nozzle regularly.
• Ensure the appliance is unplugged and cool before cleaning.

Troubleshooting

• No steam: Check water level, ensure the appliance is plugged in and turned on, and wait for it to heat up.
• Leaking: Ensure the water tank is properly seated and all connections are secure.
• Weak steam: Descale the appliance.

For further assistance, refer to the digital manual or contact Philips customer support.

Additional Information

Storage: Store the appliance in a cool, dry place.

Disposal: Dispose of the appliance according to local regulations.

Warranty: Refer to the warranty card for details.