TP-Link Omada PoE Injector, Splitter, and Extender Installation Guide

This guide provides installation instructions for TP-Link Omada Power over Ethernet (PoE) devices, including Injectors, Splitters, and Extenders.

For technical support, replacement services, user guides, and more, please visit https://support.omadanetworks.com/.

PoE Injector

The PoE Injector supplies stable power and data connectivity to a Powered Device (PD) via an Ethernet cable.

Diagram Description: A network setup illustrating a PoE Injector. A "Non-PoE Device (Switch, Router, etc.)" connects via Ethernet cable to the "LAN IN" port of the PoE Injector. The "PoE" port of the injector connects via Ethernet cable to a "Powered Device (PD)". The injector receives power from a source, indicated as "DC 48V". Examples of Powered Devices shown include an "IP Camera", "AP", and "IP Phone".

PoE Injector & Splitter

The PoE Injector and PoE Splitter can be used together to supply power and transmit data to Non-PoE devices.

Diagram Description: A network setup showing a PoE Injector and a PoE Splitter working in tandem. A "Non-PoE Device (Switch, Router, etc.)" connects to the "LAN IN" port of the PoE Injector. The "PoE" port of the injector connects to the "PoE" port of the PoE Splitter. The "LAN OUT" port of the splitter connects to a "Non-PoE Device*". The "PWR DC OUT" port of the splitter provides adjustable voltage (12V, 9V, 5V) to the Non-PoE Device. A note advises: "Set the required voltage for the Non-PoE device before connecting the cable."

PoE Splitter

The PoE Splitter can be used with PoE/PoE+ switches to deliver DC power and data to Non-PoE devices.

Diagram Description: A network setup where a "PoE/PoE+ Switch" connects via Ethernet cable to the "PoE" port of a PoE Splitter. The "LAN OUT" port of the splitter connects via Ethernet cable to a "Non-PoE Device*". The "PWR DC OUT" port of the splitter provides adjustable voltage (12V, 9V, 5V) to the Non-PoE Device. A note advises: "Set the required voltage for the Non-PoE device before connecting the cable."

Recommended Power:

POE10R: Less than 10W (5V) / Less than 9W (9V) / Less than 12W (12V)
TL-PD30G-M2: Less than 10W (5V) / Less than 18W (9V) / Less than 24W (12V)

PoE Extender

The PoE Extender is used to extend network connections from PoE-powered equipment.

Diagram Description: A network setup illustrating the use of a PoE Extender. A "PSE (e.g., PoE Switch, PoE Injector)" connects via Ethernet cable to the "LAN IN" port of the PoE Extender. The "LAN OUT" port of the PoE Extender connects via Ethernet cable to a "Powered Device (PD)". The diagram indicates connection distances of (100/250m) for both paths. A "PoE+ Extender" is also shown with similar connectivity.

Safety Information and Notices

BSMI Notice

Safety Consultation and Precautions:

Use only the original power adapter or power types specified for this product.
Unplug the power cord before cleaning the product. Do not use liquid, spray cleaners, or a damp cloth for cleaning.
Be aware of moisture; do not spill water or other liquids onto the product.
Slots and openings are for ventilation to ensure reliable operation and prevent overheating; do not block or cover them.
Do not place the product near heat sources. Do not place it in an enclosed space without normal ventilation.
Do not disassemble the casing or attempt self-repair. Contact the manufacturer or agent if the product malfunctions.
Warning: To avoid electromagnetic interference, this product should not be installed or used in residential environments (For Class A products).

Specific Model Safety Information

For POE160S/POE260S/POE170S/POE380S/POE370S:

The socket-outlet shall be installed near the equipment and shall be easily accessible.
The plug on the power cord serves as the disconnect device; the socket-outlet shall be easily accessible.
Plug the product into a grounded wall outlet via the power cord.
PoE ports must not be used to charge lithium batteries or devices powered by lithium batteries.

For POE10E/POE10R/POE260R:

This equipment can only be powered by a power source that complies with the power source Level 2 (PS2) or Limited Power Source (LPS) as defined in IEC 62368-1.

Cable Usage:

For products supplied with Ethernet cables, use the provided cable only on the non-PoE side. Select an appropriate length cable for the PoE side as needed.

RoHS Statement: Please check: https://www.tp-link.com/tw/support

	TP-Link Omada PoE Injector, Splitter, and Extender Installation Guide This guide provides installation instructions for TP-Link Omada PoE Injectors, Splitters, and Extenders, detailing how to supply power and data to various network devices.
	TP-Link PoE Injector, PoE Splitter, and PoE Extender Installation Guide Comprehensive guide to installing and using TP-Link's PoE Injector, PoE Splitter, and PoE Extender for efficient power and data delivery to network devices. Includes setup instructions and diagrams.
	TP-Link PoE Injector and PoE Splitter Installation Guide This installation guide provides detailed instructions for setting up TP-Link TL-POE150S PoE Injectors and TL-POE10R PoE Splitters. It covers product descriptions, connection diagrams, LED explanations, frequently asked questions, safety information, technical specifications, and compliance details.
	TP-Link PoE Injector and PoE Splitter Installation Guide Comprehensive installation guide for TP-Link PoE Injectors (TL-POE150S) and PoE Splitters (TL-POE10R), covering setup, operation, specifications, and safety information for network power delivery.
	Omada Passive PoE Adapter Installation Guide Installation guide for TP-Link Omada Passive PoE Adapters (POE2412G, POE4818G, POE4824G), detailing connection, installation, specifications, and safety information.
	TP-LINK TL-POE150S PoE Injector: Features, Specifications, and Use Cases Discover the TP-LINK TL-POE150S PoE Injector. Learn about its IEEE 802.3af compliance, cost-saving benefits, technical specifications, and how it extends network connectivity for devices like IP cameras, phones, and access points.
	TP-Link Omada Passive PoE Adapter Installation Guide Comprehensive installation guide for the TP-Link Omada Passive PoE Adapter. Learn how to connect the device for simultaneous power and data transmission, along with essential safety information and compliance details. Includes support links.
	TP-Link Omada PoE++ Injector POE170S Datasheet Datasheet for the TP-Link Omada PoE++ Injector POE170S, detailing its specifications, features, and compliance with IEEE 802.3af/at/bt standards for high-power PoE delivery up to 60W.