Contractor Select TWR LED Wall Pack

Product Overview

The Lithonia Lighting Contractor Select TWR LED wall packs combine a classic day-form design with the latest generation of LEDs, offering exceptional energy savings and low maintenance. These fixtures provide significant versatility with 18 configurations in one product, featuring standard Adjustable Lumen Output (ALO), Switchable Color Temperature (SWW2), and an adjustable photocell (PE).

Key Features

• Two sizes available, delivering from 2,300 to 16,100 lumens, suitable for replacing 70W to 400W HID luminaires.
• Achieve energy savings of up to 86% compared to HID wall packs, with payback periods of less than two years.
• Three adjustable lumen output levels and switchable CCT (3000K, 4000K, 5000K) for warm, cool, and daylight options in a single fixture.
• Standard photocell can be easily turned on or off.
• IP65 rated, featuring a rugged die-cast aluminum housing and a borosilicate glass lens.
• High efficacy of up to 155 LPW.
• DLC Premium qualified product [✔️].
• Backed by a 5-year limited warranty [?️].
• UL Listed for wet locations [?].

Product Configurations

Standard Configurations

* Default out-of-the-box settings.

Made To Order Options

* Note: Made to order options are available with normal lead time. E7WC Option is Certified in CA TITLE 20 Appliance Efficiency Database.

TWR LED Stock Configurations

Specifications

Intended Use

The TWR LED wall packs are designed to replace up to 400W Metal Halide fixtures, offering an energy-efficient, low-maintenance lighting solution with a traditional aesthetic. Ideal for outdoor applications including carports, loading areas, self-storage facilities, and parking areas.

Construction

Features a rugged cast-aluminum housing with a durable bronze polyester powder paint finish. The door is side-hinged and detachable for easy installation and service. Castings are sealed with a one-piece gasket to prevent external contaminant ingress. Rated for outdoor installations with a minimum ambient temperature of -40°C.

Electrical

The light engine utilizes long-life, high-efficacy LEDs mounted on an internal aluminum heat sink for optimal heat dissipation and extended lifespan. LEDs maintain 90% of light output at 50,000 hours of service. The UVOLT driver operates on any line voltage from 120-347V (50/60Hz) and includes 6kV surge protection. The fixture is supplied with a 0-10V dimmable driver; no user-serviceable parts are present.

Battery Specs

An optional E7WC emergency battery backup provides 7 Watts of power, delivering up to 1,000 lumens in emergency mode. It operates down to -20°C and is compatible with the MVOLT model TWR1.

Installation

Designed for wall mounting above four feet from the ground. The housing is configured for direct mounting over a standard 4" outlet box (by others) or for surface wiring using any of the four convenient 1/2" threaded conduit entry hubs.

Listings

• UL Listed to U.S. and Canadian safety standards for wet locations.
• Tested in accordance with IESNA LM-79 and LM-80 standards.
• DesignLights Consortium (DLC) Premium qualified product and DLC qualified product. Verify specific model qualifications at www.designlights.org/QPL.

Warranty

Comes with a 5-year limited warranty. For complete warranty terms, visit www.acuitybrands.com/support/warranty/terms-and-conditions.

Note: Actual performance may vary based on end-user environment and application. All values are design or typical, measured under laboratory conditions at 25°C. Specifications are subject to change without notice.

Dimensions

All dimensions are in inches (centimeters) unless otherwise indicated.

• TWR1: Width: 13.2" / 33.5cm, Height: 9.4" / 23.9cm, Depth: 7.2" / 18.4cm, Weight: 7.5 lbs (3.4kg)
• TWR1 E7WC: Width: 15.25" / 38.74cm, Height: 10.75" / 27.31cm, Depth: 8.75" / 22.23cm, Weight: 9.66 lbs (4.38kg)
• TWR2: Width: 17.1" / 43.5cm, Height: 9.2" / 23.4cm, Depth: 7.9" / 20.1cm, Weight: 12.1 lbs (5.5kg)

Lumen Output Data

Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered representative of configurations shown within LM-79 tolerances.

TWR1 Lumen Output

TWR2 Lumen Output