GEPRC MARK5 Freestyle Quadcopter User Manual & Setup Guide

Summary

The GEPRC MARK5 is a new generation freestyle drone designed for optimal performance. It features a wide X-arm design, a unique shock-absorbing structure for stable operation, and aluminum alloy side plates for reduced weight and increased endurance. The MARK5 is equipped with the SPAN F722-HD-BT FC with Bluetooth wireless connection for easy field tuning, and the SPAN G50A BLHeli_32 4IN1 50A ESC paired with GEPRC's latest 2107.5 motors for powerful and responsive flight. The GEMFAN Freestyle 4S propellers ensure a smooth flying experience. The drone includes two 3D printed action camera mounts compatible with various cameras like GoPro, Insta 360 GO2, and Caddx Peanut.

Specification

• Model: MARK5 Freestyle Quadcopter
• FC: SPAN F722-HD-BT FC
• ESC: SPAN G50A BLHeli_32 4IN1 50A 4-6S ESC
• VTX: AIR UNIT / VISTA / RAD VTX 5.8G 1.6W
• Camera: AIR UNIT Camera / Caddx Ratel2
• Antenna: Momoda UFL LHCP / Momoda MMCX RHCP
• Motor: SPEEDX2 2107.5-1960KV / SPEEDX2 2107.5-2450KV
• Propeller: Freestyle 4S
• Frame: GEP-MK5
• Motor to Motor: 225mm
• Weight: 391.5 g (MARK5 HD VISTA 6S PNP)
• Receiver Options: PNP, Frsky RXSR, TBS Nano RX, ELRS 915, ELRS 2.4G

Features

1. Aluminum alloy side plates for aesthetics, reduced weight, and enhanced endurance.
2. Bluetooth wireless connection for convenient field tuning.
3. Wide X-arm design optimized for freestyle flying.
4. HD version includes DJI HD System and original Air Unit camera.
5. Multiple receiver options, including the new ExpressLRS Rx.
6. Upgraded SPAN G50A BLHeli_32 4IN1 50A ESC with GEPRC's latest 2107.5 motor for strong power and fast response.
7. Unique shock-absorbing structure design to minimize vibrations and resonance.
8. Independent compartment for capacitor and buzzer to improve performance and reduce shaking.
9. GEMFAN Freestyle 4S propellers for a smooth flight experience.
10. Includes two 3D printed action camera mounts for GoPro, Naked GoPro8, Insta 360 GO2, and Caddx Peanut cameras.
11. MARK5 is ideal for freestyle flying and resistant to bando-bashing.

Warranty Policy

1. For any damage or unknown issues, please contact GEPRC for assistance.
2. Warranty does not cover impact damage, liquid damage, high-temperature burns, or other artificial damage.

PS

1. All components undergo strict inspection and testing before shipping.
2. Cooperate with GEPRC engineers for troubleshooting if problems arise (Email: support@geprc.com).

DJI Digital FPV System Binding

1. Power on the DJI FPV Goggles, Transmitter, and Quadcopter. Double-press the DJI FPV Goggles bind button; it will beep to indicate binding state.
2. Press the VISTA bind button. The indicator light turns red (binding), then yellow (binding successful). The FPV Goggles will display the received picture.
3. Press the C1 custom button, record button, and right scroll wheel button of the transmitter simultaneously. The indicator light turns blue, and the transmitter beeps, indicating binding.
4. Press the VISTA bind button again. The indicator light turns red (binding), then yellow (binding successful). The transmitter indicator light turns green.

Bind FrSky R-XSR

1. For Taranis X9D/X9D Plus/X9E and Taranis QX7: Turn on the transmitter, navigate to MENU - MODEL SETUP - PAGE 2, select Internal RF, and choose BIND.
2. Turn on the receiver while holding its bind button. Release the button; the blue, red, and yellow LEDs will illuminate.
3. A flashing red light indicates successful binding. Turn the receiver off and then on again. The blue and yellow lights being on indicate a normal link.

Bind TBS NanoRX

1. For Taranis X9D/X9D Plus/X9E and Taranis QX7: Turn on the transmitter, go to TOOLS - CROSSFIRE SETUP - XF Micro TX, and select Bind.
2. Turn on the receiver while holding its bind button. Release the button; the green light flashes. Hold the button for 8 seconds and release. The green light turns off, and the red light flashes. The transmitter screen will prompt 'update micro RX?'; select 'ENTER'.
3. After the update completes, binding is successful, and the receiver's green light will be solid.

Bind GEPRC ELRS Receiver

GEPRC's ELRS 868 MHz, ELRS 915 MHz, and ELRS 2.4 G receivers share the same binding methods.

1. Power the receiver off and on three times consecutively (with a 1-second interval). The receiver's blue light will flash twice continuously, indicating it has entered binding state.
2. For Taranis X9D/X9D Plus/X9E and Taranis QX7: Turn on the transmitter, go to TOOLS - ELRS, and select BIND.
3. Binding is successful when the receiver's blue light changes from continuous double flashes to a steady light. Power cycle the receiver; the blue light should remain on, indicating a normal link.

Install Betaflight

Install Betaflight Configurator

While the quadcopter is factory-ready, installing Betaflight Configurator is recommended for debugging. Download the appropriate installation package from GitHub. Select the correct file for your operating system (EXE for Windows, DMG for macOS, RPM/DEB for Linux, APK for Android).

Install Drivers

Windows users must install drivers manually. macOS and Linux do not require manual driver installation.

• CP210x Drivers: Silicon Labs
• STM USB VCP Drivers: STMicroelectronics
• Zadig: Zadig

Transmitter Setup

ARM (DJI Transmitter)

1. The toggle switches on the DJI FPV Transmitter are pre-configured at the factory:
• SA → AUX1 (ARM)
• SB → AUX2 (MODES)
• SC → AUX3 (BEEPER)
• SD → AUX4 (Vacancy)
2. DJI toggle switches are three-position. Moving the yellow cursor within the set range for the corresponding AUX channel activates the function.

OpenTX Transmitter

1. For OpenTX transmitters (Taranis X9D/X9D Plus/X9E, Taranis Q X7): Turn on the transmitter, go to MENU-MIXS to check current AUX channel settings.
2. Typical AUX channel assignments:
• CH5 (SF) → AUX1 (ARM)
• CH6 (SG) → AUX2 (MODES)
• CH7 (SA) → AUX3 (BEEPER)
• CH8 (Vacancy) → AUX4 (Vacancy)
3. The FrSky X9D transmitter's SF toggle switch is two-position. Moving the yellow cursor within the set range for the corresponding AUX channel activates the function.
4. Use the transmitter wheel to select the AUX channel and press/hold the wheel to edit. You can name the aux channel and set desired toggle switches. Exit and save.

IRC Tramp (Analog VTX)

To enter the OSD menu: Turn on the transmitter, set THR to middle, YAW to left, and PITCH to up. Use PITCH to move the cursor up/down and ELE to enter the next item. Finally, save and exit.

VTX Frequency Table

Install Silicone Pad

A silicone pad is provided to help secure the battery.

Install Propellers

Propellers are pre-installed. Ensure they are correctly oriented before takeoff. The diagram shows the correct direction for clockwise (CW) and counter-clockwise (CCW) propellers.

Pre-flight Check

Performing a pre-flight check is crucial for safety and to prevent crashes. Follow these steps before each flight:

1. Turn on the transmitter, select the correct model, ensure the arming switch is in the 'disarmed' position, and the throttle is at its lowest point.
2. Visually inspect the quadcopter for any damage. Repair if necessary.
3. Confirm propellers are correctly installed and the nuts are secure. Incorrect installation can lead to a crash.
4. Check the LiPo battery voltage. A fully charged LiPo should be approximately 4.2V per cell (e.g., 12.6V for 3S, 16.8V for 4S).
5. Ensure the battery is securely fastened to the aircraft with the strap and that the balance lead is tucked away to avoid propeller strikes.
6. Scan the flight area for potential hazards like people or animals.
7. Verify a clear and strong video feed in your FPV goggles or screen. Resolve any interference or display of another pilot's feed before flying.
8. Arm the quadcopter and listen for any unusual sounds, such as props hitting antennas or wires.
9. Once checks are complete, take off and enjoy your flight.

Note: Exercise caution when flying near water. Salvaging a drone that falls into water is difficult, and water damage is not covered by the warranty.

Package Includes

• 1 x MARK5 Quadcopter
• 4 x Freestyle 4S propellers (pairs)
• 1 x Battery strap M15x250mm
• 2 x Battery strap M20x220mm
• 1 x Battery strap M20x250mm
• 2 x Battery Silicone Pads
• 1 x Camera cage carbon top plate
• 1 x 3D print mountings combination
• 2 x Action cam mount holder
• 1 x Set of screws
• 1 x Set of screwdrivers
• 1 x Antenna fixed tube
• 1 x OSD menu board (Analog Version)

Contact

• Website: https://geprc.com/
• Instagram: instagram.com/geprc
• Support: geprc.com/support