Redmi Pad Pro Keyboard

Quick Start Guide

[MI Logo]

Introduction

Thank you for choosing the Redmi Pad Pro Keyboard. This product is compatible with the Redmi Pad Pro and Redmi Pad Pro 5G.

For more compatibility information, visit the official website: www.mi.com/global/service/userguide

Product Overview

The product label information is printed on the internal side of the product bracket.

Key features include a USB Type-C Port and a Power switch.

Pairing and Charging

Pair your device and tablet using Bluetooth.

Charge your device with a USB Type-C charger.

For more information, visit the official website: www.mi.com/global/service/userguide

WEEE (Waste Electrical and Electronic Equipment)

Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.

Important Safety Information

Read all safety information below before using your device:

Input: 5V=500mA.
Using unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks. Use only authorized accessories compatible with your device.
After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours.
Operating temperature range: 0°C to 40°C. Storage temperature range: -20°C to 45°C. Using the device outside this temperature range may damage it.
If your device has a built-in battery, do not attempt to replace it yourself to avoid damage to the battery or device.
Batteries must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations.
Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.
Do not short-circuit the battery, as this may cause overheating, burns, or other injury.
Do not place the battery in a high-temperature environment. Overheating may cause explosion.
Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.
Do not burn the battery, as this may cause fire or explosion.
If the battery appears deformed or damaged, stop using it immediately.
User shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer.
Keep your device dry.
Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center.
Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
Your device is not a toy. As with all electrical products, precautions should be observed during handling and using of electrical products to reduce the risk of electric shock. If parents choose to allow children to use the device, they should caution his or her child about the potential hazard while using and handling the device.
For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.

Safety Precautions

Observe all applicable laws and rules restricting use of device in specific situations and environments.

Do not use your device in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules and regulations of hospitals and health centers.

If you have a medical device, please consult your doctor and the device manufacturer to determine whether your device may interfere with the device's operation. To avoid potential interference with a pacemaker, always maintain a minimum distance of 15 cm between your device and the pacemaker. To avoid interference with medical equipment, do not use your device near hearing aids, cochlear implants, or other similar devices.

Do not use your device in places with high humidity, such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage.

The power delivered by the charger shall be between min [0.075] Watts required by the radio equipment, and max [2.5] Watts in order to achieve the maximum charging speed.

Regulatory Information

EU Regulations

RED Declaration of Conformity: Xiaomi Communications Co., Ltd. hereby declares that this product 24042KBD5G is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU and RoHS Directive 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mi.com/en/certification

RF exposure information: This equipment complies with radiation exposure limits and has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

Legal Information: This device may be operated in all EU member states. Observe national and local regulations where the device is used.

Restrictions in the 2.4 GHz band: Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Frequency Bands and Power: This device offers the following frequency bands in EU areas only and maximum radio-frequency power: 2.4GHz Bluetooth: 6 dBm

UK Regulations

Xiaomi Communications Co., Ltd. hereby declares that this product 24042KBD5G is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017 No. 1206 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 No.3032. The full text of the UK declaration of conformity is available at the following internet address: www.mi.com/en/certification

Regulatory Statement (FCC)

Federal Communications Commission (FCC) notice: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

Disclaimer

This quick start guide is published by Xiaomi or its local affiliated company. Xiaomi may make improvements or changes without notice. All illustrations are for illustrative purposes only and may not accurately depict the actual device.

	Redmi Pad Quick Start Guide: Setup, Safety, and Regulatory Information A comprehensive guide for the Redmi Pad tablet, covering initial setup, MIUI features, essential safety precautions, EU and FCC regulations, RF exposure information, adapter specifications, and manufacturer details.
	Redmi Pad SE 8.7 4G Quick Start Guide and Safety Information Comprehensive quick start guide for the Redmi Pad SE 8.7 4G tablet, including setup instructions, important safety precautions, and regulatory compliance information for EU, FCC, and UK.
	Redmi Pad Pro Keyboard Quick Start Guide A quick start guide for the Redmi Pad Pro Keyboard, providing setup, safety information, and regulatory compliance details.
	Redmi Pad SE 8.7 Quick Start Guide A quick start guide for the Redmi Pad SE 8.7 tablet, offering essential setup instructions, safety information, regulatory compliance details, and specifications. This comprehensive guide is available in multiple languages to assist users worldwide.
	Redmi Pad 2 Quick Start Guide This document provides a quick start guide for the Redmi Pad 2, covering setup, safety information, and regulatory compliance.
	Redmi Pad 2 Quick Start Guide Get started with your Redmi Pad 2. This quick start guide provides essential setup instructions, important safety information, and regulatory compliance details for the Redmi Pad 2 tablet. Find out how to power on, configure, and safely use your new device.
	Xiaomi Redmi Note 13 Pro 5G Quick Start Guide A concise guide to setting up and using the Xiaomi Redmi Note 13 Pro 5G, covering essential safety information, regulatory compliance, and device specifications.
	Redmi Pad SE 8.7 4G Quick Start Guide This document provides a quick start guide for the Redmi Pad SE 8.7 4G, including setup instructions, safety information, and regulatory compliance details.