Delux M618ZD Wireless Vertical Mouse User Manual

Introduction

Thank you for choosing the Delux wireless vertical mouse. Please read this user manual carefully before using this product.

Contents

• Wireless vertical mouse
• User manual
• USB Nano receiver (stored in the battery compartment)
• 1.4m Type-C charging cable

Features

• Ergonomic vertical left-handed design
• Dual-mode connection
• 1000mAh built-in Li-ion battery

Specifications

Button Function

① Forward: Navigates to the previous page.

② DPI cycle: Cycles through DPI settings.

③ Backward: Navigates to the next page.

④ Scroll wheel: Scrolls through content.

⑤ Left click: Performs a left mouse click.

⑥ Right click: Performs a right mouse click.

⑦ Charging indicator: Indicates charging status.

⑧ ON/OFF button: Powers the mouse on or off.

⑨ Mode Switch Key: Switches between 2.4G and Bluetooth modes.

⑩ Bluetooth Pairing Key: Initiates Bluetooth pairing.

⑪ USB receiver: Connects the mouse to the computer via 2.4G wireless.

Connection

1) 2.4G Mode

1. Slide the ON/OFF button (Button ⑧) to the "ON" position, then plug and play.
2. If the connection breaks off, try to rematch the code as the following steps:
1. Make sure the mouse is charged and the receiver was inserted into the device.
2. Slide the 2.4G/BT button (Button ⑨) to the "2.4G" position.
3. Insert the receiver to the device, then press the left and right buttons (⑤ and ⑥) at the same time and slide the ON/OFF button (Button ⑧) to the "ON" position. After 3s, the mouse can work normally.
4. If the rebuilding failed, repeat the above steps.

2) BT Mode

At the first time of using the BT mode, match the code as the following steps:

1. Slide the 2.4G/BT button (Button ⑨) to the “BT" position.
2. Press the Bluetooth pairing key (Button ⑩) for 3s, and the charging indicator (⑦) turns red and flashes. Then the "Bluetooth4.0 Mouse" can be searched by the device.
3. Click the "Bluetooth4.0 Mouse" then connect successfully and the indicator turns off.
4. If the rebuilding failed, repeat the above steps.

Notes

• Connect the mouse and USB charging port with the Type-C charging cable. When charging, the indicator light (⑦) turns red; after full charged, the light turns off.
• Press the DPI Key to switch DPI among 800/1200/1600/2400/4000. The charging light flashes once, twice, third, four, and five times accordingly. Press the right, left, and middle keys at the same time for 3s to turn off the light.

Debugging Tips

• Make sure the receiver is plugged in the USB port.
• Make sure the distance between the mouse and the device is within 10m.
• Make sure the ON/OFF button is slid to the "ON" position.