Introduction to the F-DQ 8x24VDC/0.5A PP HF Module
This document serves as a comprehensive manual for the Siemens SIMATIC ET 200SP Digital Output Module, specifically the F-DQ 8x24VDC/0.5A PP HF model with the article number 6ES7136-6DC00-0CA0. It details the module's essential features, including its technical characteristics, connection diagrams, parameter settings, and various application scenarios within industrial automation systems.
The manual is structured to guide users through understanding the module's capabilities, from basic properties and overview to advanced technical specifications and operational considerations. It is intended for professionals involved in the configuration, installation, and operation of Siemens' SIMATIC automation solutions.
For further information and support, users are encouraged to explore the resources provided by Siemens, including their Industry Online Support portal. Key sections of this manual cover:
- Product Overview and Properties
- Connection and Wiring
- Parameters and Address Space
- Applications of the F-I/O Module
- Interrupts and Diagnostic Messages
- Technical Specifications
Key Features and Capabilities
The SIMATIC ET 200SP F-DQ module is a fail-safe digital output module designed for high-performance industrial applications. It offers 8 outputs, each capable of handling 24VDC at 0.5A with PP-switching, adhering to SIL3/Cat.4/PLe safety standards. The module supports PROFIsafe and direct interconnection to inputs of an F-DI, enhancing system flexibility and safety.
Diagnostic features include status and fault displays for each output, as well as module-specific diagnostics for issues like short-circuits or supply voltage failures. The module also supports firmware updates and I&M identification data, ensuring maintainability and traceability.
Additional Resources
Siemens provides extensive documentation and support for its products. Users can access the full range of documentation, including system manuals and online help, through the Siemens Industry Online Support website. Specific resources related to this module and the ET 200SP system can be found via the links provided within the official documentation.
For software tools that aid in the selection, configuration, and ordering of Siemens automation components, the TIA Selection Tool is available. Additionally, the SIMATIC Automation Tool facilitates commissioning and maintenance activities for SIMATIC S7 stations.
For network analysis during commissioning, SIEMENS PRONETA offers valuable tools for scanning PROFINET networks and checking wiring and module configurations.
