VXE R1/SE Series Wireless Mouse User Guide and Quick Start
01 Introduction to Buttons and Accessories
Mouse Components
- 1: Type-C Port ?
- 2: Left Mouse Button ?️
- 3: Right Mouse Button ?️
- 4: Scroll Wheel ?️
- 5: LED Indicator ?
- 6: Forward Button ◀️
- 7: Back Button ▶️
- 8: Power Switch ⚡
- 9: DPI Button ⚙️
- 10: Receiver Storage Slot ?
- 11: Optical Sensor ?️
- 12: Feet Area ?
Included Accessories
The following accessories may be included with your mouse:
- A: Data Cable (Type-C) ?
- B: Receiver Extender ?
- C: Mouse Feet ?
Note: Some versions may come with additional accessories B and C. Please refer to the actual received product.
Visit us at VXE.COM
02 Quick Start Guide
1. Charging / Wired Mode
Connect the mouse using the provided data cable (A) to charge the battery or use it in wired mode.
2. Wireless Mode
2-1. Wireless Mode Setup
Plug the receiver into a USB port on your computer. For optimal performance, it is recommended to use the receiver extender (B) to place the receiver closer to the mouse.
Recommended distance: < 2m. Maximum distance: > 10m.
2-2. Wireless Mode Operation
Ensure the power switch (8) is set to the 'ON' position for wireless operation.
3. Bluetooth Pairing
To enter Bluetooth pairing mode, press and hold the left, middle, and right mouse buttons simultaneously until the indicator light flashes. For advanced features and software, visit VXE.COM for software downloads.
4. DPI Adjustment
Press the DPI button (9) to quickly switch between DPI levels. The mouse provides the following DPI stages with corresponding LED indicator colors:
- 400 DPI (Red LED)
- 800 DPI (Green LED)
- 1600 DPI (Blue LED)
- 3200 DPI (Purple LED)
For custom DPI settings ranging from 50 to 26000 DPI, use the VXE software.
5. Polling Rate Settings
The polling rate can be adjusted directly through the VXE software.
6. Battery Status Indication
The LED indicator (5) shows the battery status:
- Blinking Red: Battery level is below 10%. Please charge the mouse.
- Blinking Yellow: The mouse is currently charging.
- Solid Green: Charging is complete.
Instructions for battery removal and battery recycling information are available.