RYDEEN TOMBO 360X Quick Reference Guide

Included Items

The package for your TOMBO 360X system typically includes the following:

• MicroSD Slot: Location for memory card.
• TOMBO 360X Main Unit: The primary device.
• Backpack Adaptor for Mirror Stem: For mounting the main unit.
• Proximity Sensor (A): Part of the sensor system.
• AHD Backup Camera (B): For rear view.
• GPS Unit (C): For location tracking.
• Power Wire Harness for Hardwire Installation (D): For permanent power connection.
• AHD Camera Extension Cable (B): To connect the backup camera.
• VSM-AV Mirror Stem Fit Most Vehicles (E): An alternative mounting stem.
• D-Tab (F): A mounting component.
• Mounting Adhesive (G): For securing components.
• MicroSD Inserted in Slot: Indicates a pre-inserted card or slot.
• L-shaped Tool for MV Series (F): A specialized tool.
• Velcro Straps Pre-Installed on the Mirror: For initial mounting.
• Mirror Cleaning Cloth (F): For screen maintenance.
• Type C-USB Adaptor (F): For USB connections.
• Screw Driver (H): Installation tool.
• Backpack Plate Screws (H): For securing the backpack plate.

Getting Started

1. Mount the mirror onto the vehicle

Universal Mount Solution: Mount the TOMBO 360X onto your existing rearview mirror using the provided Velcro straps. Apply the adhesive in the indicated position for stability.

Mirror Replacement Method: If replacing your existing mirror, carefully remove it and unplug any connectors. Note that mounting solutions vary by vehicle; consult a local dealer or professional if unsure.

Note: Insert the Backpack Adaptor for Mirror Stem onto the TOMBO 360X Main Unit before mounting.

Note: If your vehicle uses a universal D-Tab mount, do not remove the D-Tab. Instead, use the provided VSM-AV mount.

Mounting Stem Details:

• Use VSM-AV Mount Stem.
• Screws size: PM2.5*8mm
• Screws size: PM3*10mm

Note: If the included VSM-AV mount does not fit your factory windshield tab, you may need to use the VSM-UNI2 (sold separately).

Screws size reference: (a: PM2.5*8mm, b: PM3*10mm).

2. Wiring Diagram

Connect the components according to the diagram. The wiring differs slightly for cars and trucks.

For Cars:

• Inside View: Shows connections for Proximity Sensor, USB Type-C, Camera, GPS.
• Connections include: ACC, +12V Trigger, GND, Reverse Trigger.

For Trucks:

• Similar connections for ACC, +12V, Reverse Trigger, GND, and Camera.

3. Backup camera installation position option diagram

Choose a mounting location for the backup camera:

• Rear windshield mounting location (Interior Top Mounted): Mount inside the vehicle, near the top of the rear windshield.
• Above license plate mounting location (Exterior Mounted): Mount outside the vehicle, above the rear license plate.

4. Backup Function (To SSD or USB drive)

To store transferred files on an external storage device (SSD or USB drive), you must first format the device using your PC to the "exFAT" file system format.

Diagram Description: Shows a USB drive, Type C-USB Adaptor, and an external storage device connected via Type C.

Touchscreen Operation

5. Main User Interface

The main interface provides quick access to core functions. Elements typically include:

• Record: Start/stop video recording.
• Photo: Capture still images.
• Lock: Protect current recording from being overwritten.
• Settings: Access device configuration options.
• Modes: Switch between different camera views.
• Storage: View or manage stored files.
• Transfer: Options to move files.

6. Settings

Access the Settings menu by stopping recording. Available settings include:

• Screen Brightness: Adjust display brightness (Low, Mid, High, Auto).
• G-sensor: Adjust sensitivity for impact detection (Low, Mid, High, Off).
• Indicator/Park Lines LED: Control parking assist lines (On, Off).
• Sound Volume: Adjust audio volume (Low, Mid, High, OLED off).
• Frequency: Set power line frequency (50Hz, 60Hz).
• Audio Recording: Enable/disable audio recording (On, Off).
• Rear Cam Image: Mirror or flip the rear camera view (Standard, Mirror).
• Screen Saver: Set screen timeout (1min, 2min, Off).
• Time Setting: Manual or automatic time adjustment, DST options (On, Off).
• System Setting: Options like Factory Reset, Software Version display.

7. Modes

Switch between different viewing modes to see various camera perspectives:

• 360° Mode: Provides a full surround view.
• Wide Mode: Offers a super wide viewing angle, primarily from the front camera.
• Split Mode: Displays multiple camera views simultaneously.
• Tri-split Mode: Shows three camera views at once.

Note: In Wide Mode, ensure the front camera faces forward for optimal viewing. Angle adjustment is not available in this mode.

Note: The dash camera will remember your last selected view setting.

Power Button Operation

8. Power Button Operation

Short press: Turns the LCD monitor On/Off.

Long press: Powers the device On/Off.

Technical Support Contact Info

9. For any questions about TOMBO 360X

Please contact your retailer or RYDEEN Technical Support:

• Phone: 1-877-777-8811 (within USA only) or 1-310-787-7880
• Email: tech1@rydeenmobile.com
• Web: https://rydeenmobile.com/contact-support/

For more detailed instructions, please visit our website at www.rydeenmobile.com/manual-catalog-downloads/.