Vollrath EaziClean®, Premium™, and CanMaster™ Can Openers Blade Replacement

Tools You Will Need

• Flathead screwdriver for Premium and CanMaster models.

Instructions

1. Wash the new blade in warm soapy water. Rinse thoroughly.
2. Remove the blade cartridge.

3. Loosen the screws. Remove the blade.

   EaziClean: This model uses thumb screws.

   Premium and CanMaster: These models use standard screws.

   Diagram Description: The diagrams show the blade removal process. For EaziClean, it illustrates thumb screws securing the blade. For Premium and CanMaster models, it shows standard screws. The components labeled are the blade and the screws.

4. Discard the old blade.
5. Insert the new blade.
6. Tighten the screws.
7. Re-insert the blade cartridge.

Multilingual Information

This document also contains instructions in Spanish (Cómo reemplazar la hoja de los abrelatas EaziClean®, Premium™ y CanMaster™) and French (Remplacement de la lame sur les ouvre-boîtes EaziClean®, Premium™ et CanMaster™).