Vibe Stereo Wireless Headphones
Quick Start Guide
Product Information
Size: 212.3x75.5mm. Material: 108g copperplate paper, double-sided printing.
Charging the Headphone ⚡
Charge the headphone before using it for the first time.
- Plug the provided USB cable into the micro USB port on the headphones and a power source.
- Charge for at least 2.5 hours.
- Connect the charging cable to the charging port.
Pairing Your Headphone ?
Your headphone will work best if it is within 30 ft (10m) of your smart device. You may experience sound briefly cutting off if you are out of range or if your wireless connection is weak. Make sure Bluetooth is enabled on your smart phone or tablet before starting the pairing process.
Steps:
- Press and hold the "Play/Pause" button on the headphone until the light flashes red and blue. This indicates that your headphone is ready to pair.
- From your smart phone or tablet, find a list of nearby devices and choose "DG-985BT". Enter "0000" if asked. The headphone will "beep" when pairing is complete!
Connection Lost?
- If pairing the headphone does not work, turn off the headphone and repeat the pairing steps.
- Make sure your headphone is within range of your smart device.
- If you hear a long beep, you need to recharge your headphone. Connection may be lost due to low battery.
- When charging your headphones, only use the enclosed USB cable.
Media Key Functions
- Press & Hold Play/Pause: Turn device on/off, Reject an incoming call
- Press Play/Pause: Play/Pause music
- Press & Hold Volume Up: Increase volume
- Press Volume Up: Next Track
- Press & Hold Volume Down: Decrease volume
- Press Volume Down: Previous Track
Specifications
- Bluetooth Version: 5.0
- Wireless Distance: Up to 33ft (10m)
- Play Time: Up to 5-7 hours
- Talk Time: Up to 5-7 Hours
- Standby Time: Up to 100 Hours
- Battery Capacity: 250 mAh
- Charging Time: Up to 2.5 Hours
- FCC ID: 2AANZ985BTL
- BT ID: D044460
Warranty
This product is covered by a 3-month limited manufacturer's warranty. For assistance, contact support@dglusa.com.
Warning ⚠️
- Keep away from water and moisture.
- Keep away from heat sources.
- Do not disassemble.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Instructions for a Class B Digital Device or Peripheral
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Company Information
Company name: DGL Group, Ltd.
Distributed by DGL Group, LTD. 2045 Lincoln Highway, Edison, NJ 08817, USA.
