Micsig Product Catalog
Version: V1.5
Shenzhen Micsig Technology Co., Ltd.
Tablet Oscilloscope - TO Series
The TO Series tablet oscilloscopes are equipped with Micsig's latest SigtestUI™ multitasking system, featuring a 10.1" integrated touchscreen with 1280x800 resolution. They include an intelligent bi-directional probe interface (Micsig UPI*), standard bus trigger and decode (UART, CAN, LIN, SPI, I²C), and a built-in battery for field use. The intuitive UI and Android OS ensure ease of use, with support for Wi-Fi, HDMI, USB 3.0/2.0, and USB Type-C. Segmented Memory supports capturing up to 10,000 events.
| Model / Ordering Number | TO3004 | TO2004 | TO1004 |
|---|---|---|---|
| Analog Channels | 4 | 4 | 4 |
| Bandwidth | 300 MHz | 200 MHz | 100 MHz |
| Rise Time | ≤ 1.16 ns | ≤ 1.75 ns | ≤ 3.5 ns |
| Sampling Rate (Max.) | 2 GSa/s | 1 GSa/s | |
| Memory Depth (Max.) | 220 Mpts | 110 Mpts | |
| Waveform Capture Rate (Max.) | 300,000 wfms/s | 78,000 wfms/s | |
| Input Sensitivity Range | 1mV/div to 10V/div (1MΩ) 1mV/div to 1V/div (50Ω) |
1mV/div to 10V/div (1MΩ) | |
| Bandwidth limit | 20MHz, High & Low Pass (30Hz Full) | 20MHz, High & Low Pass (30KHz Full) | |
| Segmented Storage | Support (up to 10,000 Events) | Not support | |
| Internal Storage | 32GB | ||
| I/O Ports | Wi-Fi, USB 3.0/2.0 Host, USB type-C, Grounding, HDMI, Trigger out | ||
| Vertical Resolution | 8-bit | ||
| Display | 10.1" TFT-LCD capacitive touch screen (1280*800), 11 x 10 divisions | ||
| Trigger Types | Edge, Pulse Width, Logic, Video, Time Out, Slope, Runt, N Edge | ||
| Serial Trigger and Decode | Std.: UART, LIN, CAN, SPI, I²C; Opt.: MIL-STD-1553B, ARINC-429, CAN FD |
||
| Math | +, -, *, /, FFT, AX+B, Advanced Math | ||
| Remote Control | PC Software, Smartphone App (iOS & Android), SCPI | ||
| Dimension / Weight | 265*192*50 mm / 1.9kg (with battery) | ||
| Battery / Duration | 7.4V, 7500 mAh / 2H | 7.4V, 7500 mAh / 5H |
Tablet Oscilloscope - STO Series
The STO Series offers a robust hardware design with an intuitive Android operating system. It features 32GB storage, rich connectivity (Wi-Fi, HDMI, USB 3.0/2.0 Host/Type-C), and supports various protocol decoding (UART, CAN, LIN, SPI, I²C). The series includes an 8" LCD touchscreen with compact knob/button panel operation, innovative PC & Smartphone App remote control, and a portable design for field work. It also features the intelligent bi-directional probe interface - Micsig UPI.
| Model / Ordering Number | STO1004 |
|---|---|
| Analog Channels | 4 |
| Bandwidth | 100 MHz |
| Rise Time | ≤ 3.5 ns |
| Sampling Rate (Max.) | 1 GSa/s (single-channel) |
| Memory Depth (Max.) | 70 Mpts (single-channel) |
| Waveform Capture Rate (Max.) | 130,000 wfms/s |
| Input Sensitivity Range | 1 mV/div to 10 V/div (1MΩ) |
| Internal Storage | 32GB |
| Vertical Resolution | 8-bit |
| I/O Ports | Wi-Fi, USB 3.0/2.0 Host, USB type-C, Grounding, HDMI, Trigger out |
| Display | 8" TFT-LCD capacitive touch screen (800*600), 14 x 10 divisions |
| Trigger Types | Edge, Pulse Width, Logic, Video, Time Out, Slope, Runt, N Edge |
| Serial Trigger and Decode | Std: UART, LIN, CAN, SPI, I²C ; Opt: MIL-STD-1553B, ARINC-429, CAN FD |
| Bandwidth Filter | 20 MHz , High Pass, Low Pass (to 30 KHz) |
| Auto Measurements | 31 types |
| Remote Control | PC Software, Smartphone App (iOS & Android), SCPI |
| Dimension / Weight | 265*192*50 mm / 1.9 kg (with battery) |
| Battery (built-in) / Duration | 7.4 V, 7500 mAh Li-ion battery / 5 H |
Automotive Oscilloscope - SATO & ATO Series
Micsig offers automotive oscilloscopes in the SATO and ATO series, designed for comprehensive auto diagnostics. These oscilloscopes support various diagnostic tests including charging circuits, starter circuits, sensors, actuators, ignition, and networks (CAN, CAN FD, LIN, Flexray, K line). They feature high-resolution displays and robust connectivity options.
| Model / Ordering Number | SATO1004 | ATO1004 | ATO2004 | ATO3004 |
|---|---|---|---|---|
| Analog Channels | 4 | 4 | 4 | 4 |
| Bandwidth | 100MHz | 100MHz | 200MHz | 300MHz |
| Sampling Rate (Max.) | 1 GSa/s | 1 GSa/s | 2 GSa/s | 2 GSa/s |
| Memory Depth (Max.) | 70Mpts | 110Mpts | 220Mpts | 220Mpts |
| Waveform Capture Rate (Max.) | 130,000 wfms/s | 78,000 wfms/s | 300,000 wfms/s | 300,000 wfms/s |
| Display | 8" LCD, 800*600, 14*10 divisions | 10.1" LCD, 1280*800, 11*10 divisions | ||
| Support Diagnostic Tests | Charging Circuits, Starter Circuits, Sensors, Actuators, Ignition, Networks (CAN, CAN FD, LIN, Flexray, K line), Combination Tests | |||
| Bandwidth Filter | 20MHz, Low Pass (to 30KHz) | 20MHz, Low Pass (to 30Hz) | ||
| I/O Ports | Wi-Fi, USB 3.0/2.0 Host, USB type-C, Grounding, HDMI, Trigger out | |||
| Battery / Duration | 7.4V, 7500mAh / 5H | 7.4V, 7500mAh / 2H | ||
| Dimension / Net Weight | 265*192*50mm / 1.9kg (with battery) |
Key Features:
- Comprehensive auto diagnostic presets
- Powerful signal capture and analysis capability
- Support PC & Smartphone remote control
- Portable design with all-in-one functions
- HDMI function for training & education
- Life-long free software online update
The document also displays example waveforms for Primary Ignition, Crankshaft, CAN Bus, Throttle Position, Variable-speed Cooling Fan, Start/Charging Current, Camshaft, and Carbon Canister Solenoid Valve.
The SATO1004 Standard Kit includes:
- Micsig Tablet Oscilloscope
- 2 x Passive probe
- 2 pair x Test needle
- Power Cable
- 4 x BNC banana lines
- 2 pair x Alligator clips
- Adapter
- Battery (built-in)
- Secondary Ignition Pickup
- Carrying Case
ATO series have the same packaging configurations as SATO1004.
Optical-fiber Isolated Probe - SigOFIT
Micsig's SigOFIT probe utilizes exclusive optical isolation technology for extremely high CMRR and isolation voltage performance, revealing true signals within their full bandwidth range. It offers high CMRR up to 112 dB at 100 MHz and over 100 dB at 500 MHz, with DC gain accuracy up to 1%. It is safe for testing Gallium Nitride (GaN) and is laser-powered for long-time stable testing. Differential mode signals range from ±1.25 V to ±2500 V.
| Common Mode Rejection Ratio (CMRR) | ||||||||
|---|---|---|---|---|---|---|---|---|
| Probe Tip | DC | 1 MHz | 100 MHz | 200 MHz | 350 MHz | 500 MHz | 800 MHz | 1 GHz |
| SMA | 160 dB | 152 dB | 112 dB | 106 dB | 102 dB | 100 dB | 94 dB | 92 dB |
| OP10 | 160 dB | 120 dB | 96 dB | 92 dB | 90 dB | 86 dB | 84 dB | 82 dB |
| OP20 | 160 dB | 120 dB | 92 dB | 90 dB | 86 dB | 84 dB | 82 dB | 80 dB |
| OP50 | 160 dB | 115 dB | 86 dB | 82 dB | 80 dB | 78 dB | 75 dB | 74 dB |
| OP500 | 160 dB | 96 dB | 56 dB | 48 dB | 40 dB | 32 dB | 28 dB | 26 dB |
| OP1000 | 160 dB | 90 dB | 50 dB | 42 dB | 34 dB | 26 dB | 22 dB | 20 dB |
| OP2000 | 160 dB | 90 dB | 50 dB | 42 dB | 34 dB | 26 dB | 22 dB | 20 dB |
| Model | MOIP01P | MOIP02P | MOIP03P | MOIP05P | MOIP08P | MOIP10P |
|---|---|---|---|---|---|---|
| Bandwidth | 100 MHz | 200 MHz | 350 MHz | 500 MHz | 800 MHz | 1 GHz |
| Rise Time | ≤ 3.5 ns | ≤ 1.75 ns | ≤ 1 ns | ≤ 700 ps | ≤ 438 ps | ≤ 350 ps |
| SMA input impedance | 1 MΩ || 10 pF | |||||
| Output Voltage | ±2.5 V | ±1.25 V | ||||
| 1X: ±2.5 V | 1X: ±1.25 V | |||||
| 10X: ±25 V | 20X: ±25 V | |||||
| Differential Voltage | 20X: ±50 V | 50X: ±62.5 V | ||||
| Range | 500X: ±1250 V | 1000X: ±1250 V | ||||
| 1000X: ±2500 V | 2000X: ±2500 V | |||||
| Noise | <1.41 mVrms | |||||
| Power Supply | USB Type-C; DC: 5V | |||||
| DC Gain Accuracy | 1 % | |||||
| Common Mode Voltage Range | 60 kVpk | |||||
| Cable Length | 2 m (customizable) |
High Voltage Differential Probe - DP Series
The DP Series includes high voltage differential probes such as DP10007, DP10013, DP20003, and DP750-100. These probes offer high accuracy, low noise, and measure voltages up to 5600V. They feature a compact design, professional performance, one-press Zero calibration, and automatic overrange alarm. The DP10007, DP10013, and DP20003 are powered by oscilloscope USB output, while the DP750-100 can be powered directly by Micsig UPI oscilloscopes and automatically matches attenuation.
| Model / Ordering Number | DP10007 | DP10013 | DP20003 | DP750-100 |
|---|---|---|---|---|
| Bandwidth | 100MHz | 100MHz | 100MHz | 100MHz |
| Rise Time | ≤ 3.5ns | ≤ 3.5ns | ≤ 3.5ns | ≤ 3.5ns |
| Attenuation Range | 10X, 100X | 50X, 500X | 200X, 2000X | 50X, 500X |
| Gain Accuracy | ±2% | ±2% | ±2% | ±2% |
| Max. Differential Test Voltage (DC+AC PK) | 70V (10X) 700V (100X) |
130V (50X) 1300V (500X) |
560V (200X) 5600V (2000X) |
75V (50X) 750V (500X) |
| Max. Input Common Mode Voltage | CAT II 600V CAT I 1000V |
CAT II 1000V | CAT III 1000V | CAT II 1000V |
| Input Referred Noise | ≤ 15 mVrms (10X) ≤ 60 mVrms (100X) |
≤ 40 mVrms (50X) ≤ 230 mVrms (500X) |
≤ 160 mVrms (200X) ≤ 920 mVrms (2000X) |
≤ 240 µVrms (50X, 500X) |
| Common Mode Rejection Ratio (CMRR) | >80 dB (50 Hz / DC) >60 dB (20 KHz) >45 dB (1 MHz) |
>80 dB (DC) >60 dB (100 KHz) >50 dB (1 MHz) |
>80 dB (DC) >60 dB (100 KHz) >50 dB (1 MHz) |
>80 dB (DC) >60 dB (100 KHz) >50 dB (1 MHz) |
| Input Impedance | 8M Ω / 1.25 pF (differential) 4M Ω / 2.5 pF (single end to ground) |
10M Ω / 1 pF (differential) 5M Ω / 2 pF (single end to ground) |
50M Ω / 1.25 pF (differential) 25M Ω / 2.5 pF (single end to ground) |
8M Ω / 1.25 pF (differential) 4M Ω / 2.5 pF (single end to ground) |
| Output Voltage | ≤ 7 V | ≤ 3 V | ≤ 3 V | ≤ 1.5 V |
| Power | 1.25 W | 0.85 W | 0.85 W | 1 W |
| Power Supply | DC 5V, USB | DC 5V, USB | DC 5V, USB | DC 5V, USB; UPI |
| Overrange Alarm | Flashing Light | |||
| Input cable length | 45 cm | 15 cm | ||
| Output cable length | 90 cm | 100 cm | ||
| Operating temperature | 0°C - 45°C | |||
| Operating humidity | 10%-85% |
High Frequency AC/DC Current Probe - CP Series
The CP Series includes high frequency AC/DC current probes such as CP503B, CP1003B, CP503, and CP1003. These probes offer AC/DC measuring capabilities, degaussing/auto zero setting, and an overload flashing light indicator. They provide superior 1% DC accuracy (typical) and can be powered by a USB adapter or Micsig UPI power supply. The CP503/CP1003 models offer auto range matching with Micsig UPI oscilloscopes.
| Model / Ordering Number | CP503 | CP1003 | CP503B | CP1003B |
|---|---|---|---|---|
| Bandwidth | 50MHz | 100MHz | 50MHz | 100MHz |
| Rise Time | ≤ 7ns | ≤ 3.5ns | ≤ 7ns | ≤ 3.5ns |
| Power interface | Micsig UPI | Standard BNC | ||
| Range | 6A (2X) / 30A (10X) | |||
| Output Sensitivity | 1V/2A (6A) 1V/10A (30A) |
|||
| DC Accuracy (typical) | ±1%±10mA (6A) ±1%±50mA (30A) |
|||
| Delay | < 6ns (6A) < 6ns (30A) |
< 30ns (6A) < 30ns (30A) |
||
| Input Current Range | 20mA~6Apk (6A) 50mA~30Apk (30A) |
|||
| Max. Current Input | 30Apk, 60Apk-pk, 21.21Arms | |||
| Noise | ≤ 1.4 mA RMS (@ 20 MHz; Range 30A, 10X) | |||
| Max. Working Voltage | CAT I 300V | |||
| Max. Floating Voltage | CAT I 300V | |||
| Max. Conductor Diameter | 5mm | |||
| Overload Indicator | Flashing light | |||
| Power Supply | DC 12V (Micsig UPI) | DC 5V 3A (Std. Adapter) |
Low Frequency AC/DC Current Probe - CP2100 Series
The CP2100 Series offers current probes with bandwidths up to 2.5 MHz. They feature switchable current ranges (10A / 100A), a compact design with reliable performance, and USB power supply, eliminating the need for an extra adapter. These probes are compatible with any BNC-type oscilloscope.
| Model / Ordering Number | CP2100A | CP2100B |
|---|---|---|
| Bandwidth | DC - 800 KHz | DC - 2.5 MHz |
| Rise Time | ≤ 437.5 ns | ≤ 140 ns |
| Range | 10A / 100A | |
| Output Sensitivity | 0.1 V / A (10 A) ; 0.01 V / A (100 A) | |
| DC Accuracy (typical) | 3 % ± 50 mA (10 A) 4 % ± 50 mA (100 A, 500 mA ~ 40 Apk) 15 % (100 A, 40 Apk ~ 100 Apk) |
|
| Signal Delay | <150 ns (10 A) <200 ns (100 A) |
|
| Current Range | 50 mA ~ 10 Apk (10 A) 1 A ~ 100 Apk (100 A) |
|
| Max. Measuring Range | 100 Apk, 70.7Arms (DC+AC, pk) 200Apk-pk, 70.7Arms (AC) |
|
| Max. Working Voltage | CATIII 300V ; CAT II 600V | |
| Max. Conductor Diameter | 13 mm | |
| Overrange Alarm | Buzzer beeps, flashing light | |
| Power Supply | DC 5V | |
| Input Cable Length | 45 cm | |
| Output Cable Length | 90 cm | |
| Operating Temperature | 0°C - 50°C | |
| Operating Humidity | 10%-85% |
AC Current Probe - RCP500
The RCP500 is a compactly designed AC current probe with an exquisite appearance, offering 1% high accuracy with less than 2mV noise. It utilizes a Rogowski coil measurement system and is powered directly by Micsig UPI. A standard adapter is available for all BNC interfaces.
| Model / Ordering Number | RCP500 |
|---|---|
| Bandwidth | 15Hz - 300KHz (-3dB) |
| Current Range | 200mA (pk) - 500A (pk) |
| Output Sensitivity | 10mV/A |
| Output Noise | < 2mV rms |
| Typical Accuracy | 1 % |
| Phase Accuracy | ≤ 0.8° (45Hz-66Hz) |
| Offset Voltage | ±1mV or below |
| Max. Voltage | AC 10kV RMS (1 minute), (50Hz/60Hz) (Rogowski coil part only) |
| Conductor Under Test Diameter | ≤ 0.50mm |
| Power Supply | Micsig UPI probe interface; Adapter (USB cable) |
| Conductor Positional Accuracy | Within ±1% (Deviation from the Center) |
| Influence of External Magnetic Fields | 1.5% f.s. or below (400A/m, 50Hz/60Hz) |
| Coil to Integrator Cable Length | 2m (customizable) |
| Operating Temperature | -20-70°C |
| Operating Altitude | ≤2000m |
AC Current Probe - ACP1000
The ACP1000 is an AC current probe with an open clamp design and BNC connection for all oscilloscopes. It operates at frequencies from 10 Hz to 100 kHz, with a maximum peak current of 2000A (for 2s). It provides an output signal in mV/A with a maximum accuracy of 1% and a safety category of CAT III 600V.
| Model / Ordering Number | ACP1000 |
|---|---|
| Input Current | 0.1-10 A |
| 0.1-100 A | |
| 1-1000 A | |
| Rated Output | 100 mV / A |
| 10 mV / A | |
| Frequency | 10 Hz - 100 KHz |
| Rated Load | ≥ 100 KOhms |
| Accuracy | 3 % ± 10 mV |
| 2 % ± 5 mV | |
| 1 % ± 1 mV | |
| Current range | 0.1 A - 1000 A |
| Frequency | 10 Hz - 100 kHz |
| Maximum accuracy | 1 % |
| Safety category | CAT III 600V |
| Max. conductor diameter | 52 mm |
| Size | 111 mm x 216 mm x 45 mm |
Accessories
Micsig offers a range of accessories for their oscilloscopes and probes, including:
- Test needles (MS-A-007)
- Automotive pickup (MS-A-008)
- Flexible needle / pair (MS-A-009)
- Multimeter probe (MS-A-010)
- Alligator clips S / pair (MS-A-011)
- Piercing test hook (MS-A-012)
- T3100 HV probe 2000V/100X
- P130A BNC probe 500MHz
- P300 BNC probe 600V/300MHz
- MS-Adapter power adapter 12V 4A
- MS-Mask Screen protector
- MS-HEB oscilloscope hard case
- MS-SC-1 Carrying case for New TO series
- MS-SC-2 Suitcase for SATO1004
- STO-BA-A750 Battery for STO1000C/E /STO2000C series
- MS-A-B747 Battery for STO1000C/E /ATO/TO series
Follow Us
Connect with Micsig on social media platforms:
- YouTube
Micsig reserves the right of final interpretation for the content hereinabove. It is subject to update without prior notice. Please contact local distributors for inquiries or email Micsig directly.
Shenzhen Micsig Technology Co., Ltd.
Add: 1F, Bldg A, Huafeng International Robot Industrial Park, Hangcheng Rd, Bao'an, Shenzhen, Guangdong, China, 518126
Tel: +86-755-88600880
E-mail: sales@micsig.com
Website: www.micsig.com
