Introduction to DJI Force Pro
The DJI Force Pro is an industry-leading camera movement control system that utilizes advanced communication technologies and control algorithms. It allows operators to remotely control gimbals with high accuracy, synchronizing operator movement with camera movement for masterful and intuitive shot capture.
With its dual-frequency 2.4 GHz and 5.8 GHz wireless transmission system, the Force Pro offers a control distance of up to 3 km (unobstructed). It also supports wired connections for enhanced stability and reduced interference. The intuitive interface with a screen and dedicated buttons simplifies parameter setup for both the Force Pro and the gimbal. Powered by a 4730 mAh battery, it provides up to 5 hours of continuous operation, making it suitable for extended shoots. The Force Pro is currently compatible with the RONIN™ 2 and Ronin-S, with future support for more devices planned.
Key Features and Components
The DJI Force Pro package includes:
- Force Pro unit
- Inspire 2 RC CAN Bus Cable (5 m)
- Wireless Receiver CAN Bus Cable (0.8 m)
- USB-C Cable
- Screws
- L-Bracket
- Storage Case
- Manuals
- Antennas
The device features various control elements including speed control knobs for Pan, Tilt, and Roll axes, a sleep button, customizable C1 and C2 buttons, a jog wheel, and a power/record button. It also includes DC IN and DC OUT ports for power and communication.
Installation and Activation
Installation involves attaching the antenna and mounting the Force Pro to a tripod or handheld setup using the provided adapter and screws. For optimal performance, it is recommended to keep the DJI Force Pro and its antenna vertical during usage.
Activation is required upon first use. This involves downloading the DJI Pro Assistant for Ronin software, connecting the Force Pro to a computer via USB, and following the on-screen instructions.
Settings and Operation
The Force Pro offers extensive settings for fine-tuning camera control. Users can adjust parameters such as deadband, smoothing, and endpoints for the pan, roll, and tilt axes. The device supports both Speed and Position control modes. The main UI displays crucial information like GPS signal strength, mounting modes, and battery levels.
For detailed information on specific settings, linking procedures, and advanced configurations, please refer to the comprehensive user manual available on the DJI website.
Specifications
The DJI Force Pro boasts a power consumption of 3W, a nominal voltage of 3.85V, and a battery capacity of 4730 mAh/18.21 Wh. It operates within a temperature range of -4° to 104° F (-20° to 40° C) and offers an operating time of up to 5 hours. Charging time is approximately 2 hours.
