Introduction
Thank you for purchasing the Korg PORTABLE RECORD PLAYER handytraxx 1bit. To help you get the most out of your new device, please read this Quick Start Guide and the Owner's Manual carefully.
TIP: The documentation for the handytrax 1bit is organized as follows:
- Quick Start Guide (this document): Read this first.
- Owner's Manual (HTML): Explains how to use the various functions of this device, how to connect it to a computer for recording and so forth. You can access it at: https://korg.com/html_manual/handytraxx_1bit/
Assembly
The handytraxx 1bit must be assembled before you first use it.
Checking the Parts
The parts required to assemble this product are shown below:
- Record mat
- Belt
- Platter
- EP adapter
- Counterweight
- Main unit
- Belt
- Tonearm
- Headshell
How to Assemble
1. Mount the platter onto the spindle of this unit.
Diagram: Shows the platter being placed onto the central spindle of the main unit, aligning the platter's opening with the motor pulley.
2. Attach the belt to the motor pulley.
Align the opening on the platter with the motor pulley, and attach the belt to the motor pulley while pulling up the belt with the included red ribbon (see illustration).
Diagram: Illustrates attaching the belt to the motor pulley. It shows the belt correctly fitted without twisting, and incorrectly fitted with a twist. A red ribbon is shown assisting the belt attachment.
The belt should not be twisted when you attach it to the pulley. Remove the red ribbon.
3. Check whether the cartridge is attached, and attach the headshell onto the tip of the tonearm.
Diagram: Shows the headshell being connected to the end of the tonearm.
4. Attach the counterweight onto the tonearm.
Diagram: Shows the counterweight being screwed onto the tonearm.
5. Place the record mat onto the platter.
Diagram: Shows the record mat being placed on top of the platter.
Getting Ready
Connections
The following connections can be made:
- Headphones: Connect headphones to the headphones jack (stereo mini-phone jack).
- Playback Device: Connect to an audio amplifier or speaker with a built-in amplifier using the OUTPUT jacks (RCA pin jacks).
- Computer: Use a USB cable to connect this unit to your computer for recording. To use a 1-bit, 5.6 MHz-compatible USB audio interface, download KORG AudioGate 4. See the Owner's Manual (HTML) for details.
Diagram: Illustrates the various connection ports on the unit and how to connect headphones, a playback device, and a computer.
Connecting the AC Adapter
Attach the appropriate exchangeable plug to the AC adapter according to the type of outlet you will be using. Connect the included power adapter to the DC 5V IN connector, and then connect the plug of the power adapter to an AC outlet.
Important: Make sure to use the included AC adapter. Using a different AC adapter may cause a malfunction or other issues. Be sure to use an AC outlet of the correct voltage for your adapter.
Inserting the Batteries
Remove the screw from the bottom of the battery compartment, open the lid and insert the batteries while making sure they are facing the right direction.
Note: Batteries are not included and must be purchased separately.
- Turn off the power before replacing the batteries.
- Remove the batteries from the handytraxx 1bit immediately if they are depleted. Leaving depleted batteries in the unit might cause damage, such as due to battery leakage. The batteries should also be removed if you won't be using the unit for a long time.
- Do not mix new and partially used batteries, or batteries of different types.
Adjusting the Needle Pressure
Before you play a record, adjust the needle pressure according to the cartridge you're using.
1. Turn the counterweight to adjust the tonearm so that it is horizontally level.
Diagram: Shows the tonearm being adjusted to a horizontal position by turning the counterweight.
2. Spin the gauge ring on the counterweight and then align it to 0.
3. Turn the counterweight counterclockwise and set it to a needle pressure that's suitable for the cartridge. Set this to 2.5 if you're using the included cartridge.
Operation
Turning the Power On
Hold down the power button to turn on the power. The power indicator lights up. To turn off the power, hold down the power button.
Auto Power-Off
The handytraxx 1bit features an auto power-off function. The power automatically turns off if the handytraxx 1bit is not operated for 20 minutes and the turntable is stopped.
Playing a Record
1. Place your record onto the turntable.
When playing an EP record (such as a single or a donut-shaped record with a larger hole in the middle), attach the included EP adapter to the spindle and then place the record onto the turntable.
2. Use the RPM switch to set the playback speed.
The RPM switch sets how fast the turntable rotates, so set this switch according to the type of record you're playing.
3. If you want to hear sound from the built-in speakers, turn the SPEAKER switch on the side panel to ON.
If you don't want to output sound from the built-in speakers, turn the switch to OFF and listen to the sound either through the headphones jack or the OUTPUT jacks.
4. Unlock the arm lock on the armrest. Release the tonearm from the lock.
5. Slide the STOP/START switch to START, which rotates the turntable.
6. While holding the tonearm using the finger lift on the headshell, move the tonearm over the record.
The platter spins, and the record plays when you rest the needle onto the record.
7. Use the MAIN VOLUME knob to adjust the volume.
Main Specifications
- Drive system: belt-driven (with digital rotation correction)
- Power: AC adapter, six AA batteries (alkaline or nickel-metal hydride)
- Dimensions (W × D × H): 370 × 286 × 118 mm / 14.6" × 11.26" × 4.65" (including extensions and dust cover)
- Weight: 2.8 kg / 6.17 lb (not including batteries)
- Included items: Quick Start Guide, AC adapter, AC adapter replacement plugs (5 types), dust cover, platter, belt, record mat, EP adapter, headshell, cartridge (pre-installed on headshell), counterweight, platter securing cap
* Specifications and appearance are subject to change without notice for improvement.
