Manuals+

GSM/GPRS/GPS Tracker User Manual

In order to protect the environment and provide timely up-to-date information about your tracker, we have made an electronic user manual. To download your electronic user manual, please visit our website: www.baanooliot.com

Document Version: 303FG-2-V3.3

Contents

1. Specifications

Product name Wireless data terminal
Model 303FG
DIM. 9.6×5.3×1.6cm
Weight 70g
Network GSM/GPRS
Band 850/900/1800/1900Mhz
GPS sensitivity -165dBm
GPS accuracy 5m
Time To First Fix Cold status: 45s
Warm status: 35s
Hot status: 1s
Applicable car power 12V-24V
Battery Chargeable 3.7V 350mAh Li-ion battery
Storage Temp. -40 °C to +85 °C
Operation Temp. -20 °C to +65 °C
Humidity 5%--95% non-condensing

2. Hardware Description

The device features a GPS/POWER/GSM status light indicator.

Image Description: A compact, rectangular device with rounded edges, primarily black on the front with a silver/grey frame. It has indicator lights at the top. The front also displays "GPS TRACKER". Below the main body, there is a bundle of colored wires.

3. Terminal Installation

  1. Please ask a qualified engineer to install it.
  2. The installation environment should ensure that the GSM and GPS signals are good.
  3. Please do not install it in a dusty and humid environment.
  4. Find the 12PIN wiring harness provided with the product, insert it into the corresponding wiring hole of the product, and connect to the original car circuit as shown in the following Wiring Diagram.

Wiring Diagram Description:

  1. The pink wire can be connected to the original car alarm horn or an alarm horn purchased separately.
  2. Understand that the vehicle door trigger type is positive trigger or negative trigger. Connect to the green wire if it is a positive trigger, and to the blue wire if it is a negative trigger.
  3. Please install the SOS button where the driver can touch it.
  4. SIM card installation: Please use the included screwdriver to open the case to insert the SIM card. If you intend to expand storage space, insert a micro SD card and then assemble the case. Ensure the SIM card's network frequency band is supported by the device. Caller ID must be turned on, the PIN code must be turned off, and call forwarding function cannot be turned on.

SIM Card Types:

  1. After inserting the SIM card, connect the positive and negative (red and black) wires of the power supply to the 12V or 24V power supply of the car. Wait for the device to work normally after 1 minute of power-on, and then turn on the Backup battery switch.

4. Device Status Light

5. Mobile APP

Scan the QR code to download the APP.

Image Description: Two QR codes are displayed side-by-side. The left QR code has a "BAANOOL" logo. The right QR code is within a stylized app interface showing a map and the word "OPEN".

Search for "BAANOOL IOT" on Google Play, App Store, or Baidu App Store to download the application.

Register: Open BAANOOL IOT, register a new account and login. Choose "BAANOOL car" to enter the application.

Bind Device: Click "Me" > "Device Management" > "Add", then scan the QR CODE on the device or enter the IMEI manually to bind the device.

Image Description: A series of mobile app screenshots. The first shows a login/registration screen with fields for email, verification code, new password, and a "Register" button. The second shows a "System switch" screen with options like "Baanool Pet", "Baanool Watch", and "Baanool Car". The third shows a "My device" screen with "Device Management", "Group management", and "Sub-account management" options, and a list of devices. The fourth shows an "Add device" screen with a large input field for an IMEI number and a "Scan QR CODE or enter the IMEI number" instruction, along with a placeholder for the QR scanner.

6. BAANOOL IOT's Web Version

Open www.baanooliot.com. The login account name and password are the same as the phone app's.

Image Description: A web page screenshot showing a login interface for "BAANOOL IOT". It includes fields for English language selection, account/email, password, a "Login" button, and a "No account? Please register" link. A QR code is also present for downloading the app.

7. GPRS Configuration for Live Real-Time Tracking

Set APN, Account user name, and password to log in to the web platform.

Usually, the device can automatically recognize and select the APN, user name, and password of GPRS settings. If the device cannot connect to the web platform, use mobile phone text messages to configure the settings according to the following steps.

Attention: When reading this user manual, note that "+" between words means they should be written together as one word, and a space between words means you should leave one character space.

7.1 APN Setting

APN is an abbreviation for Access Point Name and changes depending on your mobile network. For more information about your local APN, please check with your local wireless carrier.

  • SMS command: APN+password+space+local APN
  • Tracker response: APN OK
  • Example: APN123456 CMNET

Note: 123456 is the default password; please change the password on the APP or refer to section 8.1.

7.2 Configure User Name and Password of GPRS

In most countries, the user name and password of GPRS are not necessary. Ignore this step if it is not required for your local network.

For countries requiring user name and password, please configure as follows:

  • SMS command: up+password+space+user+space+password
  • Tracker response: user, password ok!
  • Example: up123456 Jonnes 666666

Note: 123456 is the device password, Jonnes is the GPRS username, and 666666 is the GPRS password.

7.3 Configure Domain Name and Port

The tracker connects to tracker.baanooliot.com:8090 by default. If you need to connect to another domain name, please configure it.

  • SMS command: dns+password+space+DNS domain name+space+port
  • Tracker response: dns success!
  • Example: dns123456 tracker.baanooliot.com 8090

Note: If you want to configure an IP address instead of DNS, send the SMS command: "adminip+password+space+IP+space+port"

7.4 GPRS Mode

  • SMS command: GPRS+password
  • Tracker response: GPRS OK! (Indicates it has been switched to GPRS mode.)

8. Function Details

The following setting functions can be configured through the APP or web version.

8.1 Changing Password

  • SMS command: password+oldpassword+space+new password
  • Tracker response: password OK
  • Note: Be sure to keep the new password in mind. You will need to flash the firmware to restore the initialized settings if you lose the new password.
  • Attention: Ensure the new password consists of 6 Arabic digits; otherwise, the tracker cannot recognize it.

8.2 Authorization

Up to 5 numbers can be authorized.

  • 8.2.1 Automatic Authorization: Call the tracker 10 times in succession; the number will be automatically authorized as the first number, and the tracker will respond "add master ok".
  • 8.2.2 SMS Command Authorization:
    • SMS command: admin+password+space+mobile phone number
    • Tracker response: admin ok
  • 8.2.3 SMS Command Un-authorization:
    • SMS command: noadmin+password+space+authorized number
    • Tracker response: noadmin ok
  • 8.2.4 International Format Authorization: To receive notification alerts when the tracker moves to another country, you must include the country code before the phone number. If your phone number starts with "0", remove it. For example: admin123456 008613322221111.

8.3 Single Tracking

  • 8.3.1 Call Response: If no authorized numbers are set up, it will reply to all calls with a location report. If authorized numbers are set up, it will not respond to calls from unauthorized numbers.
  • 8.3.2 Real-time Location Report: If you call from an authorized phone number, it will hang up and report a real-time location.

Image Description: A mobile phone screen displaying a location report. It shows "4G", "17:47", "87%" status at the top. The main content includes latitude (lat: 22.554459), longitude (long: 113.903981), speed (speed: 0.04), time (T: 20/06/02 09:46), a Google Maps link (https://maps.google.com/maps?f=q&q=22.554459,113.903981&z=16), and status indicators for Power (Pwr: OFF), Door (Door: OFF), and ACC (ACC: OFF).

When the device loses GPS fix, the message will include the last known GPS position and a LAC code of the updated position.

  • 8.3.3 SMS Command: position+password. The function is the same as 8.3.2.

8.4 Sleep Tracking Strategy

8.4.1 Sleep Off Timing Tracking Strategy:

  • SMS Command: Sleep+password+space+off+space+030s+030m +005n
  • Description: No sleep mode (GPRS is always online). Updates position every 30s when moving, and every 30 minutes when motionless. 005n means 5 times; ***n means unlimited times.
  • Note: Time values must be 3 Arabic numerals. Minimum interval is 10 seconds (s: seconds, m: minutes, h: hours).

8.4.2 Sleep Off Timing and Distance Tracking Strategy:

  • SMS command: Sleep+password+space+off+space+030m +0200d +005n
  • Description: No sleep mode (GPRS is always online). Updates position every 30 minutes when moving, and every 200 meters when motionless. 005n means 5 times; ***n means unlimited times.
  • Note: Time values must be 3 Arabic numerals. Distance values must be 4 Arabic numerals. 'd' represents distance in meters. Minimum time interval is 10 seconds.

8.4.3 Sleep On Timing Tracking Strategy:

  • SMS Command: Sleep+password+space+on+space+030s+001h+005n
  • Description: Sleep mode (GPRS offline when device is stopped, in motion, or an alarm is triggered). Reports position every 30 seconds when moving, and every 1 hour when stopped. 005n means limited to 5 positionings; ***n means unlimited.
  • Note: Time values must be 3 Arabic numerals. Movement interval: min 10 seconds. Stop interval: min 30 minutes.

8.4.4 Sleep On Timing and Distance Tracking Strategy:

  • SMS command: Sleep+password+space+on+space+001h+0200d +005n
  • Description: Sleep mode (GPRS offline when device is stopped, in motion, or an alarm is triggered). Reports every 1 hour when stopped. When the device moves 200 meters, it reports. 005n means limited to 5 positionings; ***n means unlimited.
  • Note: Time values must be 3 Arabic numerals. Distance values must be 4 Arabic numerals. 'd' represents distance in meters. Minimum static interval is 30 minutes.

8.5 Smart Angle Updating

  • 8.5.1 Functionality: Updates positions automatically to the web platform when the vehicle changes direction by a preset angle, making the trace follow the road better. Only available in GPRS mode.
  • 8.5.2 SMS command: angle+password+space+angle value
  • Tracker response: angle ok
  • Note: The angle value must be 3 Arabic digits; the default is 30 degrees.

8.6 Location Based Service (LBS) / Cell-ID Tracking

If the tracker cannot establish a solid GPS fix, it will calculate its location using Cell-ID GSM locating. In SMS mode, location reports include GPS coordinates of the last known positions and a LAC code. In GPRS mode, the tracker automatically switches to LBS tracking and locates directly on the platform map. Base station positioning information may have an error related to GSM signal strength.

Note: This function generally works well in most areas based on GSM signal conditions but may not be available everywhere.

8.7 Listen

  • 8.7.1 Default Mode: Track mode. Dial the device to get a position report.
  • 8.7.2 Listen Mode:
    • SMS command: listen+password
    • Dial the device to enter Listen mode.
  • 8.7.3 Restore to Track Mode:
    • SMS command: tracker+password

8.8 Forwarding Incoming SMS Messages

  • SMS command: forward+password+space+third party phone number
  • Tracker response: forward ok

It is recommended to set up the carrier's number for sending notification messages. The tracker will forward these messages to authorized numbers to remind you to top up your SIM card.

  • Cancel: noforward+password

8.9 SIM Card Balance Enquiry

  • SMS command: balance+password+space+phonenumber+space+code
  • Tracker response: Forwards the code to the specified phone number and returns the content from that number.

This function assumes your GSM network provider allows checking SIM card balance via SMS to a specified number (e.g., 10086 for China Mobile).

Diagram Description: A flow diagram showing "Mobile" sending a balance message (e.g., "balance123456 10086 ye..") to "Tracker". Tracker receives and executes, then sends it out to "10086 (China mobile)". "10086" sends balance back to "Tracker". Tracker receives balance message and sends it back to "Mobile". The process also shows "Received ye from number in the tracker and process..".

8.10 ACC ON/OFF Alert

This function is OFF by default.

  • Activate:
    • SMS command: ACC+password
    • Tracker Response: ACC ok

If the tracker detects an "ignition on" signal from the ACC wire (white wire), it will send "ACC on+latitude& longitude" to the authorized number. When it detects an "ignition off" signal, it will send "ACC off+ latitude & longitude" to indicate the vehicle has stopped.

  • Deactivate:
    • SMS command: noACC+password
    • Tracker response: noACC ok

Notifications can only be activated or deactivated via SMS to authorized phone numbers. Notifications to the web platform cannot be deactivated and will always send automatically.

8.11 Remote Immobilizing

  • 8.11.1 Immediate Execution Way:
    • SMS command: quickstop+password
    • Tracker response: quickstop OK
    • Example: quickstop123456

    Tracker will immobilize the vehicle immediately.

  • 8.11.2 Remote Immobilizing (Engine Stop):
    • SMS command: stop+password
    • Tracker response: Stop engine succeed
    • Example: stop123456

    When receiving the STOP command, the tracker checks the speed. It will execute after the speed is less than 20KM/H. If the speed is higher, it will delay execution until the speed is less than 20KM/H.

  • 8.11.3 Remote Fuel Resume:
    • SMS command: resume+password
    • Tracker response: Resume engine Succeed
    • Example: resume123456

    This command resumes the fuel & power supply.

8.12 Fuel Sensor Calibrating

To accurately read fuel percentage, the tracker needs to calibrate 0% and full values based on fuel tank height and specifications.

  • Calibrate 0% (Fuel Tank Empty):
    • SMS command: oilzero+password
    • Tracker response: oilzero ok!
    • Example: oilzero123456
  • Calibrate 100% (Fuel Tank Full):
    • SMS command: oilfull+password
    • Tracker response: oilfull ok!
    • Example: oilfull123456

You can connect the vehicle's original voltage-type fuel sensor (0-5V range). If the original sensor is not compatible, an external voltage-type fuel sensor is the solution.

8.13 Configure Times of Alarm

The number of times SOS, power, oil, door, and ACC alarms send can be set. Default is once.

  • SMS command: xtime+password+times value
  • Tracker response: xtime ok!
  • Example: xtime123456 005 (Sends alarm 5 times.)

Note: The times value must be 3 digits.

8.14 Alarms

8.14.1 Low Battery Alarm

Activated by default. When battery voltage is near 3.55V, the tracker sends "low battery + latitude & longitude" to authorized numbers twice at 15-minute intervals.

  • Deactivate:
    • SMS command: lowbattery+password+space+off
    • Tracker response: lowbattery off ok
    • Example: lowbattery123456 off
  • Activate:
    • SMS command: lowbattery+password+space+on
    • Tracker response: lowbattery on ok
    • Example: lowbattery123456 on

8.14.2 Power Disconnection Alarm

Activated by default. The tracker sends "Power alarm+latitude& longitude" to authorized numbers when external power is disconnected. Alarm notifications can also be received on the app.

  • Deactivate:
    • SMS command: extpower +password+space+off
    • Tracker response: extpower off ok
    • Example: expower123456 off
  • Activate:
    • SMS command: extpower +password+space+on
    • Tracker response: extpower on ok
    • Example: expower123456 on

8.14.3 Blind Area Alarm

Deactivated by default. If the tracker loses GPS fix, it sends an SMS notification "No gps+latitude& longitude of the last know position." to authorized numbers.

  • Activate:
    • SMS command: gpssignal +password+space+on
    • Tracker response: gpssignal on ok
    • Example: gpssignal123456 on
  • Deactivate:
    • SMS command: gpssignal +password+space+off
    • Tracker response: gpssignal off ok
    • Example: gpssignal123456 off

8.14.4 SOS Alarm

Press the SOS button for 3 seconds (For model G, press the [key] on the remote control). The tracker will send an SMS notification "Help me+latitude& longitude" to all authorized numbers. The siren will not sound.

8.14.5 Geo-fence

The Geo-fence feature creates a virtual fence. When the tracker moves out of this fence, an SMS notification "stockade!+latitude &longitude" is sent to authorized numbers in SMS mode. In GPRS mode, the Geo-fence alarm is sent to the Web.

  • Activate: stockade+password+space+latitude, longitude; latitude, longitude
  • Tracker response: stockade ok!
  • Example: stockade123456 22.554459, 113.903981; 22.553002, 113.909378

Note: The first latitude & longitude is the coordinate of the top-left corner of the Geo-fence, and the second is the bottom-right corner.

  • Deactivate: nostockade+password
  • Example: nostockade123456

8.14.6 Movement Alarm

When the device stays in one place for 3-10 minutes with a GPS signal, you can send the SMS command "move+password+space+0200" (assuming a range of 200 meters). The device will reply "move ok!". Once out of range, it will reply "move + latitude and longitude" to the authorized number. (Default distance is 200 meters.)

  • Cancel: Send SMS "nomove+password".

8.14.7 Over Speed Alarm

Send SMS command "speed+password+space+080" (for 80km/h). The device will reply "speed ok!". When running over 80km/h, it sends " speed+080!+latitude and longitude" to the authorization number. In SMS mode, it sends one text message within 3 minutes. In GPRS mode, it sends once within 3 seconds. The siren sounds for one second when speeding.

  • Cancel: Send SMS "nospeed+password".

Note: Recommended speed should not be less than 30km/h. Setting it lower may cause false alarms due to GPS inaccuracy.

8.14.8 Fuel Alarm

When fuel consumption exceeds the normal standard while running, or if there is fuel leakage/stealing when stopped, the tracker sends "oil: ××%+latitude & longitude" to authorized numbers. The siren beeps for 20 seconds.

  • Stop notification: nooil+password
  • Example: nooil123456

8.15 Remote Controller (For G model)

Key Function Descriptions
[key] Arming Press for 0.5 second, siren beeps one time.
[key] Disarming Press for 0.5 second, siren beeps 2 times.
[key] Silent arming Press for 0.5 second in disarm state; siren beeps once. In silent mode, the siren will not sound even if an alarm is triggered. DISARM exits silent mode.
[SOS] SOS Press for 3 seconds; tracker sends SOS alert to authorized phone numbers. Siren won't sound.
[key] Deterrence/ Car locate Press for 0.5 second in arm state; siren beeps 10 seconds, press [disarm] [key] to stop.

8.16 Arming

8.16.1 Arming by SMS

  • Command: arm+password
  • Response: Tracker is activated, vehicle terminal enters armed state. If the vehicle is in the ignition state (key not pulled), it cannot enter the armed state and will reply "set up fail! pls turn off ACC".

8.16.2 Arming with Remote Controller (For G model)

Press the [key] for 0.5 seconds; the car enters arming state and the siren beeps once. No SMS is sent. If the vehicle is in the ignition state (key not pulled), it cannot enter the armed state, and the siren doesn't sound.

8.17 Silent Arming

8.17.1 Silent Arming by SMS

  • SMS Command: silent+password
  • Respond: silent ok!, the terminal enters silent arming state. After an alarm is triggered, the siren does not sound, but an alarm text message is sent to the authorized number.

8.17.2 Silent Arming with Remote Controller (For G model)

Press the [key] for 0.5 second in disarm state; the siren beeps once, and the vehicle enters silent arming state. After an alarm is triggered, the siren does not operate, but an alarm text message is sent to the authorized number. To exit, press the [disarm] [key].

8.18 Disarming

8.18.1 Disarming by SMS

  • SMS command: disarm+password
  • Tracker response: Tracker is deactivated
  • Example: disarm123456

After disarming, the door, shock sensor, and ACC alarms will be deactivated and won't be triggered.

8.18.2 Disarming with Remote Controller (For G model)

Press the [key] for 0.5 second; the tracker enters disarming state, and the siren beeps twice.

8.19 Alarm Function in Arming State

8.19.1 Door Opening Alarm

When the door is opened in arming state, the tracker sends SMS notification "Door alarm+latitude & longitude" to authorized numbers. The siren beeps for 20 seconds. If the door remains open, the siren beeps for another 20 seconds with a 20-second pause. Disarming quits the alarm.

8.19.2 ACC Alarm

The tracker sends "ACC alarm + latitude / longitude" to authorized numbers if the vehicle ignition is switched "ON" (key rotated to "ACC ON" position while the tracker is in arming state). The siren beeps for 20 seconds. If the ignition remains on, the siren beeps for another 20 seconds with a 20-second pause. Disarming quiets the alarm.

The app also receives alarm messages simultaneously.

8.19.3 Acceleration Sensor Alarm

8.19.3.1 Functionality: A built-in three-axis acceleration sensor detects movement, tilt, and shock when in arming state. The tracker sends "Sensor alarm + latitude / longitude" to authorized numbers, once every 3 minutes. The siren beeps for 5 seconds for the first and second triggers, and 10 seconds for subsequent triggers. The app receives alarm messages simultaneously. Disarming quits the alarm.

8.19.3.2 Sensor's Sensitivity Configuration:

  • First level (Slight vibration):
    • SMS command: sensitivity+password+space+1
    • Tracker response: sensitivity ok
    • Example: sensitivity123456 1
  • Second level (Medium vibration):
    • SMS command: sensitivity+password+space+2
    • Tracker response: sensitivity ok
    • Example: sensitivity123456 2
  • Third level (Severe vibration):
    • SMS command: sensitivity+password+space+3
    • Tracker response: sensitivity ok
    • Example: sensitivity123456 3

8.20 Check Status

  • SMS command: check+password
  • Reply: Power, Battery, GPS signal, ACC, Door, GSM signal, GPRS, APN, UP, IP, Port etc.
  • Example: check123456
  • Tracker response includes: Power (ON/OFF), Battery (100%), GPRS (ON/OFF), GPS (OK/NO GPS), ACC (OFF/ON), Door (OFF/ON), GSM Signal (1-32, higher is better), APN (e.g., cmnet), IP (e.g., 104.250.138.146), PORT (e.g., 9000), Arm (OFF/ON).

8.21 Check IMEI

  • SMS command: imei+password
  • Tracker response: xxxxxxxxxxxxxxx (A 15-digit IMEI of your device)
  • Example: imei123456

8.22 Local Time Setting

The tracker operates in the local time zone by default. If the time zone is incorrect, you can configure it.

  • SMS command: time+space+zone+password+space+time zone value
  • Tracker responds: time ok
  • Example: time zone123456 8

8.23 Reset Hardware

  • SMS Command: reset+password
  • Tracker Response: reset ok
  • Example: reset123456

8.24 Configure Parameters by USB

Connect the tracker to a computer using the USB cable and open the configuration file (e.g., user_config.ini) with a text editor. Manually change parameters and settings according to the tips.

Note: You must enter the correct password of the tracker in the old password field every time you change settings; otherwise, the changes will not be successful.

8.25 Activate Fuel Value in GPRS

GPRS data strings do not include fuel value by default. To include it, configure as follows:

  • SMS command: protocol+password 18
  • Tracker response: protocol 18 ok
  • Example: protocol123456 18

To revert to the default data string:

  • SMS command: protocol+password 12
  • Tracker response: protocol 12 ok
  • Example: protocol123456 12

Note: By default, the tracker connects to www.baanooliot.com:8090 with fuel value enabled, so this step is usually not necessary. If using another IP or domain name, use this command to activate the fuel value.

8.26 TCP / UDP Switch

  • SMS command to switch to TCP mode: GPRS+password,0,0 (TCP mode is the default)
  • SMS command to switch to UDP mode: GPRS+password,1,1
  • Tracker response: GPRS OK!
  • Example: GPRS123456,0,0 or GPRS123456,1,1

8.27 SMS Mode

Switching to SMS mode disconnects the GPRS connection for live tracking.

  • SMS command: SMS+password
  • Tracker response: SMS OK! (Indicates it has been switched to SMS mode.)
  • Example: SMS123456

8.28 Configure SMS Monitoring Center Number

  • SMS command: centernum+password+space+phone number
  • Tracker response: centernum ok

After the SMS monitoring center number is set, SMS reports from the positioning strategy will be sent to this number. If the monitoring center number needs to receive alarm notifications, set it as an authorized number too.

  • Cancel SMS monitoring center number:
  • SMS command: nocenternum+password
  • Tracker response: nocenternum ok
  • Example: nocenternum123456

8.29 Configure GPRS Heartbeat Package Interval

The default heartbeat interval to keep the GPRS connection alive is 100 seconds. You can change it if necessary. A too-long interval may cause GPRS disconnection.

  • SMS command: heartbeat+password+space+time interval
  • Tracker response: heartbeat ok
  • Example: heartbeat123456 120

Note: (123456 is the tracker's password, 120 is the interval in seconds.) The minimum interval is 60 seconds. The tracker will continue to send heartbeats every 60 seconds if a value less than 60 is configured.

8.30 Initialization

If the tracker is not working properly, you can send a command to initialize it to return to default factory settings.

  • SMS command: begin+password
  • Tracker response: begin ok
  • Example: begin123456

9. Package Contents

No. Photo Name Specifications Applicable model
1 [Image of wiring harness] Harness 12PIN Standard
2 [Image of microphone] Microphone 1.5m Standard
3 [Image of relay] Relay 12V/40A or 24V/40A Standard
4 [Image of siren] Siren 12V/24V Optional
5 [Image of fuel sensor] Fuel sensor Optional
6 [Image of remote control] Remote control Optional for G model

10. Cautions

Please be sure to follow these guidelines when using the device:

  1. Keep the tracker in a dry environment. Humid conditions can easily damage internal circuits.
  2. Do not place it in a dusty environment.
  3. Do not expose the tracker to overheated or overcooled places.
  4. Handle carefully. Do not vibrate or shake it violently.
  5. Clean with a dry cloth; do not use chemicals and detergents.
  6. Do not paint the device, as this may lead to internal circuit failure.
  7. Do not disassemble the device.
  8. Please read the user manual carefully before installation and operation, and understand the voltage range. Otherwise, it may not work properly or could damage the tracker.

11. Troubleshooting

Faults Solution
Fail to turn on 1. Check if the power wiring is correct.
2. Check if the power voltage is correct.
No GSM signal 1. Check whether the SIM card is inserted correctly.
2. Ensure the SIM card is a GSM network SIM card.
3. Do not enable the PIN code.
4. Call forwarding cannot be enabled.
No GPS signal The device needs to be in an unobstructed position to ensure it can receive GPS signals normally.
No response for SMS command 1. Ensure there is credit on the SIM card.
2. The password is incorrect or the SMS command format is incorrect.
No response for a call/No alarm notification message 1. Did you set up the authorized phone number?
2. If an authorized number exists, did you call from an authorized phone number?
3. The phone number format is incorrect.
Fail to stop engine 1. Check if the engine stop wiring is connected correctly.
2. Check if the speed is higher than the speed required to execute the stop command when using the Delay execution method.
Remote control cannot be used Turn off the tracker, and turn it on again to program the remote control.

PDF preview unavailable. Download the PDF instead.

K1218057193 Microsoft Word 2010 Microsoft Word 2010

Related Documents

Preview GSM/GPRS/GPS Portable Tracker User Manual
Comprehensive user manual for the Baanool IoT GSM/GPRS/GPS Portable Tracker, model 109. This guide details device specifications, hardware, setup procedures, GPRS configuration, various tracking functions, and troubleshooting steps.
Preview GPS TRACKER 408 User Manual
Comprehensive user manual for the GPS TRACKER model 408, detailing specifications, hardware description, installation, mobile app and web version usage, GPRS configuration, various tracking and alarm functions, status checks, troubleshooting, and important cautions.
Preview GPS Tracker 303FG User Manual - BAANOOL IOT
Comprehensive user manual for the BAANOOL IOT GPS Tracker model 303FG, detailing its specifications, hardware, installation, mobile app and web platform usage, SMS commands, various alarm functions, remote control operation, and troubleshooting tips.
Preview Baanooliot 303FG GSM/GPRS/GPS Tracker User Manual
Comprehensive user manual for the Baanooliot 303FG GSM/GPRS/GPS Tracker, covering installation, configuration, features, alarms, and troubleshooting for real-time vehicle tracking.
Preview BAANOOL GPS Tracker 405 User Manual - Installation, Features, and SMS Commands
Comprehensive user manual for the BAANOOL GPS Tracker 405, covering specifications, hardware description, installation, device status, mobile app and web server functions, SMS commands, and troubleshooting.
Preview GSM/GPRS/GPS Portable Tracker User Manual
Comprehensive user manual for the GSM/GPRS/GPS Portable Tracker, detailing its features, setup, operation, and troubleshooting, enabling effective tracking and monitoring of vehicles and other moving objects.
Preview GPS Tracker User Manual - BAANOOL IOT
Comprehensive user manual for the BAANOOL IOT GPS Tracker (Model 303FG), covering specifications, hardware description, installation, device status, mobile app and web platform usage, positioning strategies, playback, remote immobilizing, arming/disarming, alarm functions, SMS commands, and troubleshooting.
Preview BAANOOL IOT GPS Tracker 403 User Manual: Installation, Features, and Operation
Detailed user manual for the BAANOOL IOT GPS Tracker Model 403. Learn about specifications, hardware, installation, mobile app, web platform, SMS commands, alarms, and troubleshooting for your vehicle tracking device.