D-Link DWM-222 4G LTE USB Adapter Quick Installation Guide
Product Setup
Insert SIM Card Before Using: Slide the cover on the back of the device and lift it off. Insert the SIM card following the direction indicated by the icon.
Software Installation: Insert the DWM-222 into a USB port on your computer. The setup wizard should start automatically. Ensure your SIM card is in the slot. Follow the steps in the wizard to complete the setup of the DWM-222.
Troubleshooting
- More Information: A comprehensive User Manual is available for the DWM-222. Open the D-Link Mobile Connection manager and click 'Help'.
- Cannot Connect to Mobile Service Network: The DWM-222 requires a SIM card registered with a compatible service network. Contact your mobile service provider for information about the services your SIM card provides access to.
- Software Asking for PIN Number: For security, some SIM cards have a PIN number enabled. If the SIM was used in a previous device, the PIN will be the same as before. If you did not set a PIN, contact your mobile service provider.
LED Indication
- Red (blinking): No SIM card / Error
- Green (blinking): Connected to LTE network
- Blue (blinking): Connected to 3G network
Technical Support
For technical support, visit: dlink.com/support
RF Exposure Information (SAR)
This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of tissue) in countries that follow the United States FCC limit and 2.0 W/kg (averaged over 10 grams of tissue) in countries that follow the Council of the European Union limit. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep this device away from your head and body. Carry this device at least 5 mm away from your body to ensure exposure levels remain at or below the as-tested levels. Choose the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this manner. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified, and use such accessories should be avoided.
EU Declaration of Conformity
Hereby, D-link declares that the radio equipment type DWM-222 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.dlink.com/uk/en/support/cedoc
Maximum Radio-Frequency Power Transmitted
The document lists maximum transmit power in dBm for various frequency bands including GSM900, GSM1800, WCDMA Band 1, WCDMA Band 8, LTE Band 3, LTE Band 7, and LTE Band 20.