Blaupunkt 5SL92500 Extractor Hood
Installation Manual
Important Safety Information
Warning! Before proceeding with installation, read the safety information in the User Manual.
This manual is available in multiple languages, including German (DE), French (FR), Dutch (NL), Italian (IT), Swedish (SV), Spanish (ES), Danish (DA), and Norwegian (NO), all conveying essential safety instructions.
Included Components and Hardware
The package typically includes the following hardware for installation:
- Screws: L (10x), I (10x - 6x70), K (10x - M6x80)
- Washers: B (10x), C (10x)
- Remote Control 📻
- Filters: W (2x, quantity may vary based on model configuration)
Safety Precautions and Installation Requirements
General Safety:
- Ensure adequate ventilation during operation.
- Maintain a minimum clearance of 650 mm above the cooking surface (hob).
- Ensure a 90° angle for proper installation and safety.
- The mounting structure must support a minimum weight of 80 KG 💾.
- Wear protective gloves 🦁 during installation.
- Installation requires multiple people; at least five people are recommended for safe handling (🕶 🕶 🕶 🕶 🕶 OK!).
Dimensional Specifications
The extractor hood has the following approximate dimensions:
- Length: 1087 mm
- Width: 587 mm
- Main body depth: 240 mm
- Adjustable height range: Minimum 200 mm to Maximum 1000 mm.
Installation Guidelines
Correct Installation: Diagrams indicate proper alignment and placement with a thumbs-up icon (👍).
Incorrect Installation: Improper positioning or clearance is indicated by a thumbs-down icon (👎) and a cross mark (✕).
Mounting Procedure
Steps 1-3: Initial Mounting
- Step 1: Attach component F3 to the mounting bracket.
- Step 2: Position the main unit and attach the mounting bracket to the ceiling or support structure.
- Step 3: Secure the unit using screws K with washers B and C, ensuring a firm connection (OK! ✔).
Steps 4-5: Securing to Structure
- Step 4: Insert ten (10x) screws labeled 'L' into the designated holes on the mounting plate.
- Step 5: Drill holes using a 10mm drill bit (🔬). Insert wall plugs 'I' (10x) and then secure with screws 'L' (10x).
Steps 6-7: Cable Management
- Step 6: Guide the necessary cables upwards through the mounting points (4x).
- Step 7: Connect the cable 'F' to the appropriate terminal.
Steps 8-9: Suspension
- Step 8: Continue securing the unit with the suspension rods/cables.
- Step 9: Finalize the suspension of the main body.
Step 10: Lifting and Positioning
- Step 10: With the assistance of multiple people, carefully lift and position the extractor hood. Ensure the minimum clearance of 650mm from the hob is maintained.
Steps 11-12: Final Securing
- Step 11: Continue guiding the suspension cables upwards.
- Step 12: Secure the cables at the top mounting points (4x).
Step 13: Attachment Verification
- Step 13: Ensure the unit is securely attached to the ceiling or support. Reiterate safety distance: minimum 650mm from hob, 90° angle. Correct attachment is indicated by a thumbs-up (👍); incorrect attachment by a thumbs-down (👎) and a warning symbol (⚠).
Step 14: Electrical Connection and Leveling
- Step 14: Connect the electrical wiring (Step 1: connect, Step 2: secure). Ensure the unit is perfectly level (0.0° 🔴).
Step 15: Main Body Securing
- Step 15: Secure the main body of the extractor hood at multiple points (4x).
- Cable Management: Trim excess cable length if necessary (✂), or leave sufficient slack.
Filter Installation
The extractor hood requires filters (W) for operation. Follow these steps for installation:
Steps 18-20: Filter Insertion
- Step 18: Install the filter 'W' (2x) into the designated slots. Secure using the provided mechanism (Step 1: insert, Step 2: lock).
- Step 19: Install the second filter 'W' (2x).
- Step 20: Install the third filter 'W' (2x).
Filter Installation Details (a-e)
- a: Loosen or remove a securing screw.
- b: Insert filter 'W' (2x).
- c: Insert filter 'W' (2x).
- d: Insert filter 'W' (2x).
- e: Insert filter 'W' (2x).
Final Assembly
Attach any final covers or panels as required. Secure using component 'Z' if applicable.