Blaupunkt Extractor Hood Installation Manual
Models: 5DB69753, 5DB66753
Important Safety Information
Before proceeding with installation, please read the safety information provided in the user manual.
Languages:
- German (DE): Warnhinweis! Vor der Montage die in der Bedienungsanleitung enthaltenen Sicherheitsinformationen lesen.
- English (EN): Warning! Before proceeding with installation, read the safety information in the User Manual.
- French (FR): Avertissement ! Avant de procéder à l'installation, veuillez lire les informations sur la sécurité contenues dans le manuel de l'utilisateur.
- Dutch (NL): Waarschuwing! Lees de veiligheidsinformatie in de gebruikershandleiding alvorens het apparaat te installeren.
- Italian (IT): Avvertenza! Prima di procedere all'installazione, leggere le informazioni sulla sicurezza contenute nel Manuale d'uso.
- Swedish (SV): Varning! Läs säkerhetsföreskrifterna i bruksanvisningen innan apparaten installeras.
- Spanish (ES): ¡Advertencia! Antes de proceder a la instalación, lea las indicaciones de seguridad del manual de instrucciones.
- Danish (DA): Advarsel! Læs sikkerhedsreglerne i brugsanvisningen inden installation.
- Norwegian (NO): Advarsel! Les sikkerhetsinstruksjonene i bruksveiledningen før apparatet installeres.
Product Overview and Parts
This document outlines the installation process for Blaupunkt extractor hoods. The following components are typically included:
- M (2x): Mounting brackets
- H1 (2x): Decorative covers
- O: Chimney top
- O2: Filter unit
- O3: Telescopic chimney sections
- L (8x): Screws (8x - 4.2x44.4)
- I (8x): Screws
- N1: Upper chimney section
- N2: Lower chimney section
- Q (4x): Screws (4x - 2.9x9.5)
- R (2x): Screws (2x - 2.9x6.5)
- S (2x): Screws (2x - 3.5x9.5)
- G1 (2x): Fasteners
- W: Carbon filter (optional accessory)
Dimensions:
The extractor hood requires specific clearances for installation. Please refer to the diagrams for detailed measurements:
- Overall height range: Min. 730 mm - Max. 1000 mm
- Width: 598 mm, 898 mm, or 1198 mm (depending on model)
- Depth: 450 mm
- Hood body height: 253 mm
- Flue duct diameter: Ø150 mm
- Minimum distance from hob surface: 500 mm (electric hob), 650 mm (gas hob)
Installation Steps
Follow these steps for proper installation:
- Step 1: Positioning Mark the mounting points on the wall above the cooking area. Ensure correct alignment and height based on hob type.
- Step 2: Mounting Brackets Attach the mounting brackets (M) to the wall using appropriate screws (L).
- Step 3: Attaching Chimney Sections Connect the telescopic chimney sections (O3) and secure them.
- Step 4: Installing the Hood Body Mount the main hood body onto the prepared brackets.
- Step 5: Securing the Hood Use screws (S) to secure the hood to the mounting structure.
- Step 6: Connecting the Flue Duct Attach the flexible flue duct (Ø 120 mm or Ø 150 mm) to the motor outlet and the wall vent. Ensure a secure connection.
- Step 7: Installing Chimney Covers Slide the upper (N1) and lower (N2) chimney sections into place, covering the flue duct and mounting hardware. Secure them using screws (R, Q).
- Step 8: Final Checks Ensure all connections are secure and the hood is stable. Install any optional accessories like carbon filters (W).
Note: Specific steps may vary slightly depending on the model and installation environment. Always refer to the detailed diagrams provided.
Maintenance and Care
Regular cleaning of the filters and exterior surfaces is recommended to maintain optimal performance and appearance.
