Bosch BCB 5524 Cell Balancer
Created for Life
BCB 5524 Cell Balancer for Advanced Voltage Balancing of High-Voltage Battery Cells
The Bosch BCB 5524 cell balancer improves performance and extends the life of battery packs in electric vehicles.
BCB 5524: High-Voltage Battery Cell Balancing
BCB 5524 is a modern cell balancer designed for electric vehicle batteries. It excels in precise voltage balancing, thereby improving battery performance and extending its lifespan.
BCB 5524: Essential Equipment for Electric Vehicle Repair Shops
Thanks to intelligent control, real-time monitoring, and comprehensive protection mechanisms, the BCB 5524 ensures safe and efficient operation. It works with various types of lithium batteries, supports individual cell balancing, and independent channel balancing.
BCB 5524: Configuration to Target Voltage
BCB 5524 is used in cases of large voltage deviations between individual cells and precisely configures connected cells to the same level according to the user-set target voltage. Thanks to these features, it is an indispensable tool for auto repair shops performing electric vehicle service and battery maintenance.
The image shows a Bosch BCB 5524 cell balancer. It is a professional-looking device, predominantly green and black, with a prominent touchscreen display. The display shows a user interface with various parameters, likely related to battery voltage and status. On the front panel, there are several controls and indicators, including a large red emergency stop button, a green start button, and connectors labeled 'CHANNEL-1', 'CHANNEL-2', 'AC', and 'EMERGENCY'. The overall design suggests a robust tool for automotive diagnostics and maintenance.
Benefits for Auto Repair Shops
- Automatic real-time voltage detection: Quick check of cell status and connection of leads thanks to immediate voltage detection upon connecting the BCB 5524
- Independent balancing control: Precise and efficient voltage balancing thanks to independent management of each cell's balance
- Real-time monitoring: Continuous monitoring of battery voltage, current, and temperature for optimal performance and timely identification of operational faults
- Quick initialization: Pre-installed software and startup wizard for fast and easy setup without manual installation
- Emergency protection and alarms: The emergency stop button [stop-button] ensures immediate power shutdown, protecting both the user and the device in critical situations, preventing user injury and device damage due to incorrect operation
- Multiple protection mechanisms: Safe operation thanks to protection against overvoltage [up-arrow-red], undervoltage [down-arrow-red], overcurrent [current-arrow-red], short circuit [short-circuit-symbol], and overheating [thermometer-red]
- Easy data management: Generation, export, and printing of detailed charging and discharging reports for convenient sharing and analysis
Maintaining and Optimizing the Performance of High-Voltage Battery Cells in Auto Repair Shops
The BCB 5524 cell balancer is an essential tool for auto repair shops involved in the maintenance or optimization of electric vehicle battery packs.
- Maximize battery performance: Achieve precise voltage balancing between cells to increase the overall performance and efficiency of your battery.
- Extended battery life: Prevents uneven wear of cells, significantly extending battery lifespan and reducing replacement costs.
- Safe operation: Thanks to several built-in protection mechanisms against overvoltage, undervoltage, overcurrent, short circuits, and overheating, the BCB 5524 ensures safe device operation.
- Real-time diagnostics: Real-time monitoring of voltage, current, and temperature for quick identification and resolution of potential problems and prevention of unexpected failures.
- User-friendly interface: Easy setup and operation with an initialization wizard, pre-installed software, and intuitive controls, allowing easy access even for individuals with minimal technical knowledge.
- Detailed reporting: Comprehensive charging and discharging reports for thorough analysis and sharing, providing all information for maintenance and optimization.
Technical Data
| Parameter | Specification |
|---|---|
| Power Input | AC 90-264 V / 40-60 Hz 10 A |
| Display | 10" Touchscreen LCD Display |
| Built-in Memory | 32 GB |
| Discharge/Charge Power | Max. 600 W |
| Discharge/Charge Voltage | DC 1-5 V |
| Discharge/Charge Current | 0.1-5 A |
| Discharge/Charge Mode | CC-CV |
| Current Regulation Accuracy | ±50 mA |
| Voltage Regulation Accuracy | ±5 mV |
| Weight | 17 kg |
Service Information:
The BCB 5524 device may only be used by personnel with appropriate qualifications for high-voltage vehicle electrical systems. Bosch offers corresponding training.
Learn more about Bosch service training by scanning the QR code! [Scan QR code for Bosch service training information]
Bosch – know-how, test equipment, and service training from a single source
Bosch Support for Auto Repair Shops Focused on High-Voltage Systems
As a developer of innovative solutions and a supplier of hybrid and electric drive technology for original equipment, Bosch is helping to shape technological changes in the vehicle and auto repair market. Bosch offers extensive workshop equipment and technical support for the aftermarket.
Readiness for Working on High-Voltage Systems with Bosch Service Training
For work on electric and hybrid vehicles, such as high-voltage battery repairs, extensive knowledge of complex high-voltage technology is essential. Bosch therefore offers auto repair shops a range of service training courses and legally required qualification measures.
2025 Contents and illustrations are subject to change due to technical and programming changes.
Visit: www.boschaftermarket.cz
