Meliconi Facile TV+ Universal Remote Control

About the Facile TV+ Remote

The Meliconi Facile TV+ is a universal remote control designed to replace your original remote. It reproduces infrared signals. Radio frequency functions, such as voice commands or pointer functions, are not supported.

Getting Started: Programming Your Remote

Before use, you need to program the remote to control your TV or other devices. Follow these steps:

1. Insert Batteries

   Insert 2x AAA/LR03 batteries (not rechargeable). Ensure correct polarity.

   Battery Test: Press and hold button 5. The LED indicator should remain continuously lit. If it flashes or stays off, replace the batteries.

2. Enter Setup Mode

   Press and hold the 'M' button (marked with the Meliconi logo) until the LED indicator at the top of the remote lights up steadily. Release the button.

3. Enter Device Code

   Using the numeric keypad, enter the code corresponding to your device brand. For example:

   • SAMSUNG: 1010
   • LG: 1020
   • SONY: 1030
   • PHILIPS: 1040
   • PANASONIC: 1151
   • TCL/THOMSON: 1050
   • TELEFUNKEN: 1060

   The LED indicator will flash 3 times to confirm the code entry. For a more extensive list of codes, scan the provided [QR Code] or visit meliconi.com/CODE/TV.

4. Test the Remote

   Point the remote at your device. Press and hold the power button (or another primary function button) until the device turns off. Release the button as soon as the device switches off (this process may take up to 5 minutes). The LED indicator will flash 3 times.

5. Verify Functionality

   Test all the buttons on the remote. If some buttons do not work correctly, repeat the programming procedure (steps 2-4) or try alternative codes. You may need to repeat the process multiple times.

Important Safety Information

Please read and follow these safety instructions:

• Keep away from children and pets. The product may contain small parts that could be a choking hazard.
• Do not expose the remote to excessive heat, direct sunlight, or fire.
• Keep away from water and liquids. Do not immerse in water.
• Do not attempt to dry the remote by heating it (e.g., with a hairdryer, oven, or microwave).
• Do not tamper with or attempt to open the device to avoid electric shock.
• Do not use a damaged product.
• If a battery leaks, clean the fluid carefully without touching it directly with your hands, as it can be irritating and corrosive.
• Use only batteries of the specified type (AAA/LR03) and ensure correct polarity when inserting them.

Product Disposal

The [Crossed-out bin symbol] on the product indicates that it must be collected separately from other waste at the end of its useful life. Dispose of the product at designated electrical and electronic waste collection centers. Batteries must also be disposed of according to local regulations; do not throw them into fire or disperse them in the environment.

Contact & Support

For support or warranty information:

• Italy/EU: telecomandi@meliconi.com
• France: hotline@meliconi.fr
• Phone: 02 / 66012766

Visit www.meliconi.com for more information.